ETSI EN 302 536-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment in the frequency range 315 kHz to 600 kHz Part 2 Har_1.pdf

1、 ETSI EN 302 536-2 V1.1.1 (2007-11)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short Range Devices (SRD);Radio equipment in the frequency range 315 kHz to 600 kHz;Part 2: Harmonized EN covering essential requirementsof articl

2、e 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, includin

3、g IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Tele

4、communications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a

5、 procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC of the E

6、uropean Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Part 2: “Harmonized EN covering essential requirements of article 3.2 of the R Short Range Devices (SRD); Radio equipment in the f

7、requency range 315 kHz to 600 kHz; Part 1: Technical characteristics and test methods“. 2 ETSI TR 100 028 (V1.4.1) (all parts): “Electromagnetic compatibility and Radio Spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. 3 Definitions, symbols and abb

8、reviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R the value of the measurement uncertainty for the measurement of each parameter shall be included in the test report; the recorded value of the measurement uncertainty shall be, for each meas

9、urement, equal to or lower than the figures in table 1. For the test methods, according to the present document, the measurement uncertainty figures shall be calculated in accordance with TR 100 028 2 and shall correspond to an expansion factor (coverage factor) k = 1,96 or k = 2 (which provide conf

10、idence levels of respectively 95 % and 95,45 % in the case where the distributions characterizing the actual measurement uncertainties are normal (Gaussian). Table 1 is based on such expansion factors. Table 1: Maximum measurement uncertainty Radio frequency 1 10-7RF power, conducted 0,75 dB RF powe

11、r, radiated 6 dB Temperature 1C Humidity 5 % Voltage 1 % 5.3 Essential radio test suites 5.3.1 Permitted frequency range of the modulation bandwidth The test for bandwidth specified in EN 302 536-1 1, clause 8.3.2 appropriate to the EUT shall be carried out. The results obtained shall be compared to

12、 the limits in clause 4.2.2.2 in order to assess compliance with the requirement. ETSI ETSI EN 302 536-2 V1.1.1 (2007-11) 105.3.2 Effective radiated field strength of the fundamental emission The test for radiated magnetic field strength of the fundamental emission specified in EN 302 536-1 1, claus

13、e 8.2.1.2 and for radiated electric field strength specified in EN 302 536-1 1, clause 8.2.2.2, appropriate to the EUT shall be carried out. The results obtained shall be compared to the H-field limit in clause 4.2.3.1.2 and the E-field limit in clause 4.2.3.2.2 in order to assess compliance with th

14、e requirement. 5.3.3 Spurious emissions The test for spurious emissions specified in EN 302 536-1 1, clause 8.4.2.1 appropriate to the EUT shall be carried out. The results obtained shall be compared to the limits in clause 4.2.4.3 in order to assess compliance with the requirement. 5.3.4 Spurious r

15、adiation of receivers The test for spurious radiation of receivers specified in EN 302 536-1 1, clause 9.1.2 appropriate to the EUT shall be carried out. The results obtained shall be compared to the limits in clause 4.2.5.2 in order to assess compliance with the requirement. 5.3.5 Normal and extrem

16、e test-conditions The test conditions shall be as declared by the manufacturer. The requirements and test procedures shall be as specified in EN 302 536-1 1, clauses 5.3 and 5.4. 5.3.6 Test power source The test power source shall meet the requirements of EN 302 536-1 1, clause 5.2 as applicable. 5.

17、3.7 Choice of samples for test suites Measurement shall be performed, according to the present document, on samples of equipment defined in EN 302 536-1 1, clause 4.2. ETSI ETSI EN 302 536-2 V1.1.1 (2007-11) 11Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) Th

18、e HS Requirements and conformance Test specifications Table (HS-RTT) in table A.1 serves a number of purposes, as follows: it provides a statement of all the essential requirements in words and by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) s

19、pecific referenced document(s); it provides a statement of all the test procedures corresponding to those essential requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each requirement to

20、be either: - Unconditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support optional functionality defined within the schedule; in the case of Conditional requirements, it associates t

21、he requirement with the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with the referenced procedures

22、; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard EN 302 536-2 The following essential requirements and test spec

23、ifications are relevant to the presumption of conformity under Article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with satisfactory outco

24、mes is a necessary condition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers assertion

25、supported by appropriate entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present, document unless another document is referenced explicitly. Where no test is specified (that is, where the previous field is “X“) this field r

26、emains blank. ETSI ETSI EN 302 536-2 V1.1.1 (2007-11) 13Annex B (informative): The EN title in the official languages Language EN title Bulgarian E (ERM). (SRD). 315 kHz 600 kHz. 2: (EN), 3.2 (R Apparater med kort rkkevidde (SRD); radioudstyr som benytter frekvenser mellem 315 kHz og 600 kHz Del 2:

27、Harmoniseret EN, som dkker de vsentlige krav i RKort bereik apparatuur (SRD); Radio apparatuur in het frequentiegebied van 315 kHz tot 600 kHz;Deel 2: Geharmoniseerde EN welke invulling geeft aan de essentile eisen van artikel 3.2 van de R Short Range Devices (SRD); Radio equipment in the frequency

28、range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R Lhitoimeseadmed (SRD); Raadiosagedusalas 315 kHz kuni 600 kHz ttavad seadmed; Osa 2: Harmoneeritud EN R Lyhyen kantaman laitteet (SRD); Taajuusalueella 315 - 600 kHz toimivat radiolaitteet; Osa 2:

29、 Yhdenmukaistettu standardi (EN), joka kattaa R Dispositivi a breve portata (SRD); Apparecchiature radio operanti nella banda di frequenza tra 315 kHz e 600 kHz; Parte 2: Norma europea armonizzata per i requisiti essenziali dellarticolo 3.2 della direttiva R Apparati ta“ Medda Qasira (SRD); Tagmir r

30、adjofoniku fil-medda tal-frekwenzi 315 kHz sa 600 kHz; Parti 2: EN armonizzat tat l-artiklu 3.2 tad-Direttiva R Kortholdsutstyr (SRD); Radioutstyr i frekvensomrdet 315 kHz til 600 kHz; Del 2: Harmonisert EN som dekker de grunnleggende krav i R Equipamentos de Curto Alcance (SRD); Equipamentos de rdi

31、o na faixa de frequncias de 315 kHz a 600 kHz; Parte 2: EN Harmonizada cobrindo os requisitos essenciais no mbito do artigo 3., n. 2, da Directiva R Dispositivos de Corto Alcance (SRD); Equipos radioelctronicos en la gama de frecuencias de 315 kHz a 600 kHz; Parte 2: Norma Europea (EN) armonizada cu

32、briendo los requisitos esenciales segn el artculo 3.2 de la Directive R Kortdistansutrustning (SRD); Radioutrustning i frekvensomrdet 315 kHz till 600 kHz; Del 2: Harmoniserad EN omfattande vsentliga krav enligt artikel 3.2 i R&TTE-direktivet ETSI ETSI EN 302 536-2 V1.1.1 (2007-11) 15Annex C (inform

33、ative): Bibliography Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices (AMD Directive). ECC Report 12 (2002): “Ultra Low Power Active Medical Implant Systems (ULP-AMI)“. “Radiofrequency Radiation Dosimetr

34、y Handbook“ (October 1986): USAF School of Aerospace Medicine, Aerospace Medical Division (AFSC), Brooks Air Force Base, TX 78235-5301. Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical

35、standards and regulations. Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). ETSI ETSI EN 302 536-2 V1.1.1 (2007-11) 16History Document history V1.1.1 November 2006 Public Enquiry PE 20070330: 2006-11-29 to 2007-03-30 V1.1.1 August 2007 Vote V 20071019: 2007-08-20 to 2007-10-19 V1.1.1 November 2007 Publication