ETSI EN 302 729-2-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Level Probing Radar (LPR) equipment operating in the frequency range_1.pdf

1、 ETSI EN 302 729-2 V1.1.2 (2011-05)Harmonized European Standard Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short Range Devices (SRD);Level Probing Radar (LPR) equipment operating in thefrequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz,57 GHz to 64 GHz, 75 GHz to 85 GHz;Part

2、 2: Harmonized EN covering the essential requirementsof article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp

3、). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pres

4、ent document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Direct

5、ive 98/34/EC (as amended) i.1 laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to included in the publication in the Official Journal of the European Union of titles and referenc

6、es of Harmonized Standard under the Directive 1999/5/EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements r

7、elevant to Directive 1999/5/EC i.2 are summarised in annex A. For non EEA countries the present document may be used for regulatory (type approval) purposes. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Rang

8、e Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz, as identified below: Part 1: “Technical characteristics and test methods“; Part 2: “Harmonized EN covering the essential requirements of

9、 article 3.2 of the R to increase industrial efficiency, quality and process control; to improve environmental conditions in production processes. LPR always consist of a combined transmitter and receiver and are used with an integral or dedicated antenna. The LPR equipment is for professional appli

10、cations to which installation and maintenance are performed by professionally trained individuals only. NOTE: LPR antennas are always specific directive antennas and no LPR omnidirectional antennas are used. This is also important in order to limit the illuminated surface area as well as to control

11、and limit the scattering caused by the edges of the surface. The scope is limited to LPRs operating as Short Range Devices. The LPR applications in the present document are not intended for communications purposes. 2 References References are either specific (identified by date of publication and/or

12、 edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected

13、 location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 62.1 Normative references The following referenced documents a

14、re necessary for the application of the present document. 1 ETSI EN 302 729-1 (V1.1.2): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to

15、 64 GHz, 75 GHz to 85 GHz; Part 1: Technical characteristics and test methods“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 98/34/EC of the

16、 European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. i.2 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications termin

17、al equipment and the mutual recognition of their conformity (R A guide to the production of candidate Harmonized Standards for application under the R it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present do

18、cument or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each requirement to be either: - Unconditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support

19、 optional functionality defined within the schedule; in the case of Conditional requirements, it associates the requirement with the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Sui

20、te and therefore the requirement shall be demonstrated to be met in accordance with the referenced procedures; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test spec

21、ifications Table (HS-RTT) Harmonized Standard EN 302 729-2 The following requirements and test specifications are relevant to the presumption of conformity under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified correspond

22、ing to the requirement. The completion of all tests classified “E“ as specified with satisfactory outcomes is a necessary condition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ is a necessary condition for presumption of conformity, although conf

23、ormance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced

24、 explicitly Where no test is specified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 11Annex B (informative): The EN title in the official languages The enlargement of the European Union (EU) resulted in a requirement from the EU for a l

25、arger number of languages for the translation of the titles of Harmonized Standards and mandated ENs that are to be listed in the Official Journal to support the implementation of this legislation. For this reason the title translation concerning the present document can be consulted via the e-appro

26、val application. ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 12History Document history V1.1.1 August 2010 Public Enquiry PE 20101204: 2010-08-06 to 2010-12-06 V1.1.1 December 2010 Vote V 20110218: 2010-12-20 to 2011-02-18 (Withdrawn) V1.1.2 March 2011 Vote V 20110509: 2011-03-10 to 2011-05-09 V1.1.2 May 2011 Publication