ETSI EN 302 842-1-2015 VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment Technical characteristics and methods of measurement for aeronautical mobile (airborne) _1.pdf

1、 ETSI EN 302 842-1 V1.3.1 (2015-04) VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 1: Physical layer EUROPEAN STANDARD ETSI ETSI EN 302 842-1 V1.3.1 (2015-04) 2 Reference RE

2、N/AERO-00019-1 Keywords aeronautical, digital, radio, testing, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/

3、88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior

4、written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present doc

5、ument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the fol

6、lowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF

7、 version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI r

8、egistered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 302 842-1 V1.3.1 (2015-04) 3 Contents Int

9、ellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 9g32.1 Normative references . 9g32.2 Informative references 10g33 Definitions and abbreviations . 11g33.1 Definitions 11g33.1.1 Basic reference model definitions . 11g33.1.2 Service conventi

10、ons definitions 11g33.1.3 General definitions 11g33.2 Abbreviations . 15g34 General description and architecture of VDL Mode 4 . 16g34.1 General . 16g35 VDL mode 4 physical layer functional specifications . 16g35.1 Overview 16g35.1.1 Functions 16g35.1.2 Data reception . 17g35.1.3 Data transmission 1

11、7g35.2 Modulation scheme 17g36 VDL Mode 4 equipment requirements . 17g36.1 Receiver requirements 17g36.1.1 Receiver operating range 17g36.1.2 BER requirement 17g36.1.3 Reference signal level . 18g36.1.4 Sensitivity . 18g36.1.5 Adjacent channel rejection 18g36.1.6 Receiver performance in the presence

12、 of strong signals inside the VHF aeronautical band . 18g36.1.7 Receiver performance in the presence of strong signals outside the VHF aeronautical band . 19g36.1.8 Desired signal dynamic range . 19g36.1.9 Symbol rate capture range 19g36.1.10 Frequency capture range . 20g36.1.11 Doppler rate 20g36.1

13、.12 Co-channel interference 20g36.1.13 Conducted spurious emission . 20g36.1.14 FM broadcast intermodulation 20g36.1.14.1 Radio frequencies in the band 112,000 MHz to 137,000 MHz . 20g36.1.15 In-band intermodulation . 20g36.2 Transmitter requirements . 21g36.2.1 Transmitter operating range 21g36.2.2

14、 Channel bit rate . 21g36.2.3 Manufacturers declared output power 21g36.2.4 RF power rise time 22g36.2.5 RF power release time 22g36.2.6 Spurious emissions . 22g36.2.7 Adjacent channel power 23g36.2.8 Wide-band noise . 23g36.2.9 Load VSWR capability . 24g36.2.10 Adjacent channel transient power . 24

15、g36.2.11 Frequency tolerance 24g36.2.12 Start of transmission . 24g3ETSI ETSI EN 302 842-1 V1.3.1 (2015-04) 4 6.2.13 Structure of bursts . 24g36.3 Transceiver requirements . 25g36.3.1 Automatic transmitter shut-down . 25g36.3.2 Tuning time . 25g36.3.3 Receiver to transmitter turnaround time . 25g36.

16、3.4 Transmitter to receiver turnaround time . 25g36.3.5 Short power interrupt 25g36.3.6 Demodulator action. 25g36.3.7 System timing requirements . 25g36.3.8 Reservation table stored in memory . 26g36.3.9 Failure of associated equipment 26g36.3.10 Simultaneous reception . 26g37 General design require

17、ments 26g37.1 Controls and indicators . 26g37.2 Class of emission and modulation characteristics 26g37.3 Warm up . 26g37.4 Airworthiness . 26g37.5 Intended function 26g37.6 Fire protection 27g37.7 Operation of controls 27g37.8 Accessibility of controls . 27g37.9 Effects of tests 27g37.10 Failure of

18、VDL Mode 4 equipment 27g37.11 Software management 27g37.12 Transceiver configuration . 27g37.13 Provision for multiple redundant VDL4 transceivers . 28g37.14 Reception capability . 28g37.15 Transmission capability 28g37.16 Monitoring of proper operation 28g37.17 Power-up self test . 29g38 Environmen

19、tal test requirements 29g38.1 Introduction 29g38.2 Receiver 30g38.3 Transmitter . 32g39 Detailed test procedures for the physical layer . 34g39.1 General requirements . 34g39.1.1 Test conditions 34g39.1.2 Alignment, adjustment and calibration prior to test 34g39.1.3 Recording of test results . 34g39

20、.1.4 Connected load . 34g39.1.5 Test instrument precautions 34g39.1.6 Simultaneous application of two signals to the receiver input 35g39.1.7 Test frequencies 35g39.1.8 Equipment configuration 35g39.1.9 Detailed physical and MAC layer test procedures 35g39.2 Receiver 35g39.2.1 BER test 35g39.2.2 Sen

21、sitivity . 37g39.2.3 Adjacent Channel Rejection (ACR) 37g39.2.4 Rejection of signals in the VHF aeronautical band . 38g39.2.5 Rejection of signals outside the VHF aeronautical band 39g39.2.6 Desired signal dynamic range . 40g39.2.7 Symbol rate capture range 40g39.2.8 Frequency capture range . 41g39.

22、2.9 Doppler rate 41g39.2.10 Co-channel interference 42g39.2.11 Conducted spurious emission . 42g39.2.12 FM broadcast intermodulation 43g39.2.13 In-band intermodulation . 44g39.3 Transmitter . 45g3ETSI ETSI EN 302 842-1 V1.3.1 (2015-04) 5 9.3.1 Channel bit rate . 45g39.3.2 Manufacturers declared outp

23、ut power 45g39.3.3 RF power rise time 46g39.3.4 RF power release time 46g39.3.5 Spurious emissions . 47g39.3.6 Adjacent channel power 47g39.3.6.1 Method of measurement for the first adjacent channel . 47g39.3.6.2 Method of measurement for the second adjacent channel . 48g39.3.6.3 Method of measureme

24、nt for the fourth adjacent channel 49g39.3.6.4 Alternative measurement procedure for Adjacent Channel Power (ACP) 50g39.3.7 Wideband noise 51g39.3.8 Load VSWR capability . 52g39.3.9 Adjacent channel transient power . 53g39.3.10 Frequency tolerance 54g39.4 Transceiver . 54g39.4.1 Tuning time . 54g39.

25、4.2 Receiver to transmitter turn-around time 54g39.4.3 Transmitter to receiver turn-around time 55g310 Installed equipment requirements 55g310.1 Introduction 55g310.2 Equipment installation 55g310.2.1 Aircraft environment. 55g310.2.2 Failure protection 55g310.2.3 Aircraft power source . 55g310.3 Ins

26、talled equipment performance requirements 56g310.3.1 Dynamic response . 56g310.3.2 Interference effects . 56g310.3.3 Regular maintenance. 56g310.4 Conditions of test . 56g310.4.1 Power input . 56g310.4.2 Associated equipment or systems . 56g310.4.3 Environment . 56g310.5 Test procedures for installe

27、d equipment performance 56g310.5.1 Ground test procedures . 57g310.5.1.1 Conformity inspection . 57g310.5.1.2 Interference tests . 57g310.5.1.3 Power supply fluctuation test 57g310.5.1.4 Reception 57g310.5.1.5 Transmission . 57g310.5.1.6 Functional behaviour tests . 57g310.5.1.7 Interface conformanc

28、e tests . 58g310.5.2 Flight test procedures 58g310.5.2.1 Interference effects 58g310.5.2.2 System performance 58g3Annex A (informative): Cross reference matrix 60g3Annex B (informative): VDL Mode 4 link budget . 63g3Annex C (informative): Bibliography . 70g3History 71g3ETSI ETSI EN 302 842-1 V1.3.1

29、(2015-04) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellect

30、ual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including I

31、PR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (EN) has been produ

32、ced by ETSI Technical Committee Aeronautics (AERO). The present document is part 1 of a multi-part deliverable covering the VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment, as iden

33、tified below: Part 1: “Physical layer“; Part 2: “General description and data link layer“; Part 3: “Additional broadcast aspects“; Part 4: “Point-to-point functions“. The present document is accompanied by an equivalent ground-based standard, ETSI EN 301 842 i.7 parts 1 to 5, covering the VHF air-gr

34、ound Data Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment. NOTE: Minimum Operational Performance Specifications (MOPS) are also being developed for VDL Mode 4. EUROCAE have previously published Interim MOPS for VDL Mode 4 i.2 which a

35、re a sub set of ETSI EN 302 842-1 (the present document), ETSI EN 302 842- 2 7, ETSI EN 302 842-3 8 and ETSI EN 302 842-4 9. ETSI EN 302 842-1 (the present document), ETSI EN 302 842-2 7, ETSI EN 302 842-3 8 and ETSI EN 302 842-4 9 comply with the requirements of CEC Mandate M/318 i.3. National tran

36、sposition dates Date of adoption of this EN: 6 April 2015 Date of latest announcement of this EN (doa): 31 July 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2016 Date of withdrawal of any conflicting National Standard (dow): 31 January 2017 M

37、odal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ ar

38、e NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 302 842-1 V1.3.1 (2015-04) 7 Introduction The present document states the technical specifications for Very High Frequency (VHF) Digital Link (VDL) Mode 4 aeronautical mobile (airborne) radio transmitters, transceiv

39、ers and receivers for air-ground and air-air communications operating in the VHF band, using Gaussian Filtered Frequency Shift Keying (GFSK) modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 112,000 MHz to 136,975 MHz as defined in ICAO VDL SARPs 2. The

40、present document may be used to produce tests for the assessment of the performance of the equipment. The performance of the equipment submitted for type testing should be representative of the performance of the corresponding production model. The present document has been written on the assumption

41、 that: the type test measurements will be performed only once, in an accredited test laboratory and the measurements accepted by the various authorities in order to grant type approval; if equipment available on the market is required to be checked it may be tested in accordance with the methods of

42、measurement specified in the present document or a documented alternative approved by the certifying authority. ETSI ETSI EN 302 842-1 V1.3.1 (2015-04) 8 1 Scope The present document applies to the following radio equipment types: Very High Frequency (VHF) Digital Link (VDL) Mode 4 aeronautical mobi

43、le (airborne) radio transmitters, transceivers and receivers for air-ground and air-air communications operating in the VHF band, using Gaussian Filtered Frequency Shift Keying (GFSK) modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 112,000 MHz to 136,9

44、75 MHz as defined in ICAO VDL SARPs 2. The present technical document provides part 1 of the technical specifications. The present document is designed to ensure that equipment certified to it will be compatible with the relevant ICAO VDL SARPs 2 and ICAO VDL4 Technical Manual 1. Manufacturers shoul

45、d note that in future the tuning range for the transmitter and receiver may cover any 25 kHz channel from 108,000 MHz to 111,975 MHz. The present document applies to “aeronautical mobile (airborne and in some cases ground vehicles)“ equipment which will hereinafter be referred to as “mobile“ equipme

46、nt. The scope of the present document is limited to mobile stations. The equivalent specification for ground stations is ETSI EN 301 842 i.7. The VDL Mode 4 system provides digital communication exchanges between aircraft and ground-based systems and other aircraft supporting surveillance and commun

47、ication applications. The supported modes of communication include: broadcast and point-to-point communication; broadcast services including Automatic Dependent Surveillance - Broadcast (ADS-B), Traffic Information Service - Broadcast (TIS-B) and Flight Information Service - Broadcast (FIS-B) capabi

48、lities; air-air and ground-air services; operation without ground infrastructure. The present document is derived from the specifications: ICAO VDL4 Technical Manual 1 and ICAO VDL SARPs 2 produced under the auspices of the International Civil Aviation Organization (ICAO). Other relevant standards a

49、s defined in clause 2. It is envisaged that manufacturers may provide equipment supporting: broadcast services only; point-to-point services only; both broadcast and point-to-point services. The present document deals with tests of the physical layer necessary to support all types of equipment. The present document is organized as follows: clause 2 provides references to relevant documents; clause 3 provides general definitions, abbreviations and symbols used; clause 4 provides a general description and architectu