ETSI EN 302 842-4-2015 VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment Technical characteristics and methods of measurement for aeronautical mobile (airborne) .pdf

1、 ETSI EN 302 842-4 V1.3.1 (2015-04) VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 4: Point-to-point functions EUROPEAN STANDARD ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 2 Re

2、ference REN/AERO-00019-4 Keywords aeronautical, digital, radio, testing, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0

3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without

4、the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the p

5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one

6、of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content

7、of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks

8、 of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 3 Co

9、ntents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 9g32.1 Normative references . 9g32.2 Informative references 9g33 Definitions and abbreviations . 10g33.1 Definitions 10g33.1.1 Basic reference model definitions . 10g33.1.2 Service

10、 conventions definitions 10g33.1.3 General definitions 10g33.1.4 Definition of bit order . 10g33.2 Abbreviations . 10g34 General description of VDL Mode 4 mobile station point-to-point services . 12g34.1 General . 12g34.2 Data Link Service (DLS) and Link Management Entity (LME) 12g34.2.1 General 12g

11、34.2.2 DLS timers 15g34.2.3 DLS counters 16g34.2.4 Toggle bit (T) 16g34.2.5 State variables (Ttand Tr) . 16g34.2.6 Initialize Bit (IB) . 16g34.2.7 More bit (M) . 17g34.2.8 Priority (pr) . 17g34.2.9 Message fragmentation and concatenation . 17g34.2.10 DLS procedures 17g34.2.10.1 Selection of DLS proc

12、edures. 17g34.2.10.2 Short transmission procedures 17g34.2.10.3 Long transmission procedures . 18g34.2.11 Linking transmissions . 20g34.2.11.1 Types of linking 20g34.2.11.2 Combined RTS / DATA DLPDUs 20g34.2.11.3 Combined DATA / ACK DLPDUs . 20g34.2.11.4 Combined RTS / ACK DLPDUs 20g34.2.11.5 Combin

13、ed CTS / ACK DLPDUs 20g34.2.12 Ground-air link management 20g34.2.13 Air-air link management . 21g34.3 Additional VSS services . 21g35 Minimum performance specification under standard test conditions . 21g35.1 DLS sublayer 21g35.1.1 General 21g35.1.1.1 Services . 21g35.1.1.2 Data transfer 22g35.1.1.

14、3 DATA DLPDU duplicate suppression and sequencing 22g35.1.1.4 Error detection . 22g35.1.1.5 Station identification . 22g35.1.1.6 Broadcast addressing . 22g35.1.1.7 DLS Priority 23g35.1.1.8 DLS Link control DLPDUs 23g35.1.2 DLS protocol specification . 23g35.1.2.1 State variables . 23g35.1.2.2 DLS bu

15、rst formats . 23g3ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 4 5.1.3 DLS system parameters 27g35.1.4 DLS procedures 29g35.1.4.1 Setting of re-transmission parameter . 29g35.1.4.2 Selection of user data packet for transmission 29g35.1.4.3 Selection of transmission procedures 31g35.1.4.4 Short transmissi

16、on procedures 31g35.1.4.5 Long transmission procedures . 32g35.1.4.6 No link with sender . 34g35.1.4.7 User data packet reception 35g35.1.4.8 Receipt of ACK DLPDU 35g35.1.4.9 Link reset 36g35.1.4.10 Linking DLS DLPDU transmissions . 37g35.1.4.11 CTRL DLPDU 38g35.1.4.12 Procedures for air-air communi

17、cation . 38g35.2 Link management entity sublayer. 38g35.2.1 Services . 38g35.2.1.1 General 38g35.2.1.2 Link provision . 39g35.2.1.3 Link change notifications 39g35.2.1.4 CTRL DLPDU 39g35.2.1.5 Broadcast link management burst . 40g35.2.2 Control (CTRL) parameter formats 40g35.2.2.1 Encoding . 40g35.2

18、.2.2 General purpose information parameters 40g35.2.2.3 Mobile-initiated information parameters . 44g35.2.2.4 Ground-initiated modification parameters 45g35.2.2.5 Ground-initiated information parameters 48g35.2.3 LME timers and parameters 50g35.2.3.1 General 50g35.2.3.2 Timer TL1 (maximum link overl

19、ap time) . 51g35.2.3.3 Parameters TL2 (link initialization time) 51g35.2.3.4 Timer TL4 (leave generation latency) . 51g35.2.4 CTRL DLPDU types and procedures . 51g35.2.5 CTRL transmission procedures . 55g35.2.5a Frequency management procedures 55g35.2.5.1 Link connectivity procedures 55g35.2.5.2 Gro

20、und Station Identification 55g35.2.5.3 Link establishment 56g35.2.5.4 Mobile-initiated handoff . 57g35.2.5.5 Mobile-requested ground-initiated handoff . 58g35.2.5.6 Ground-initiated handoff . 58g35.2.5.7 Ground-requested mobile-initiated handoff 59g35.2.5.8 Ground-requested broadcast handoff 59g35.2

21、.5.9 Ground-commanded autotune . 60g35.2.6 VDL Mode 4 Mobile SubNetwork Dependent Convergence Function (SNDCF) 60g35.2.6.1 Frame mode SNDCF . 60g35.3 Additional VSS requirements . 60g35.3.1 Information transfer request protocol specification 60g35.3.1.1 Information transfer request parameters 60g35.

22、3.1.2 Information transfer request transmission procedures 62g35.3.1.3 Information transfer request acknowledgement procedures 62g35.3.2 Void 62g35.3.3 Void 62g35.3.4 Retransmission procedures . 63g36 General design requirements 63g37 Protocol test procedures . 63g37.1 General . 63g37.2 Required tes

23、t rig . 63g37.3 Protocol test-suite description methodology 64g37.4 Detailed protocol test procedures . 64g3ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 5 7.4.1 Test-suite overview . 64g37.4.2 Declarations 67g37.4.3 Constraints 67g37.4.3.1 Abbreviations 67g37.4.3.1.1 Subfield mnemonics 67g37.4.3.1.2 Spec

24、ial characters used in the subfield definitions 68g37.4.3.1.3 Station addresses and positions . 68g37.4.3.1.4 VDL bursts 69g37.4.3.2 Test cases 95g37.4.3.2.1 Test case macros 96g37.4.3.2.2 Test case descriptions 98g3Annex A (informative): Cross reference matrix 172g3History 185g3ETSI ETSI EN 302 842

25、-4 V1.3.1 (2015-04) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314:

26、“Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, i

27、ncluding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (EN) has

28、been produced by ETSI Technical Committee Aeronautics (AERO). The present document is part 4 of a multi-part deliverable covering the VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipmen

29、t, as identified below: Part 1: “Physical layer“; Part 2: “General description and data link layer“; Part 3: “Additional broadcast aspects“; Part 4: “Point-to-point functions“. The present document is accompanied by an equivalent ground-based standard, ETSI EN 301 842 i.1 parts 1 to 5, covering the

30、VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment. NOTE: Minimum Operational Performance Specifications (MOPS) are also being developed for VDL Mode 4. EUROCAE have previously published Interim MOPS for VDL Mode 4 i

31、.2 which are a sub set of ETSI EN 302 842-1 5, ETSI EN 302 842-2 6, ETSI EN 302 842-3 7 and ETSI EN 302 842-4 (the present document). ETSI EN 302 842-1 5, ETSI EN 302 842-2 6, ETSI EN 302 842-3 7 and ETSI EN 302 842-4 (the present document) comply with the requirements of EC Mandate M/318 i.3. Natio

32、nal transposition dates Date of adoption of this EN: 6 April 2015 Date of latest announcement of this EN (doa): 31 July 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2016 Date of withdrawal of any conflicting National Standard (dow): 31 Januar

33、y 2017 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must

34、 not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 7 Introduction The present document states the technical specifications for Very High Frequency (VHF) Digital Link (VDL) Mode 4 aeronautical mobile (airborne) radio transmitters, t

35、ransceivers and receivers for air-ground and air-air communications operating in the VHF band, using Gaussian Filtered Frequency Shift Keying (GFSK) modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 112,000 MHz to 136,975 MHz as defined in ICAO VDL SARPs

36、 2. The present document may be used to produce tests for the assessment of the performance of the equipment. The performance of the equipment submitted for type testing should be representative of the performance of the corresponding production model. The present document has been written on the as

37、sumption that: the type test measurements will be performed only once, in an accredited test laboratory and the measurements accepted by the various authorities in order to grant type approval; if equipment available on the market is required to be checked it will be tested in accordance with the me

38、thods of measurement specified in the present document or a documented alternative approved by the certifying authority; equipment comply with ETSI EN 302 842-1 5 and ETSI EN 302 842-2 6. NOTE: The present document has been produced with a view to maintaining consistency of numbering with the equiva

39、lent standard for ground equipment (ETSI EN 301 842 i.1). Where requirements are the same, they have been given the same number. Some new airborne requirements have been inserted between requirements that were sequential in ETSI EN 301 842 i.1. This has led to a non-standard form of numbering for ne

40、w requirements in some places. ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 8 1 Scope The present document applies to the following radio equipment types: Very High Frequency (VHF) Digital Link (VDL) Mode 4 aeronautical mobile (airborne) radio transmitters, transceivers and receivers for air-ground and a

41、ir-air communications operating in the VHF band, using Gaussian Filtered Frequency Shift Keying (GFSK) modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 112,000 MHz to 136,975 MHz as defined in ICAO VDL SARPs 2. The present document provides part 4 of th

42、e technical specifications. The present document is designed to ensure that equipment certified to it will be compatible with the relevant ICAO VDL SARPs 2 and ICAO VDL4 Technical Manual 1. Manufacturers should note that in future the tuning range for the transmitter and receiver may also cover any

43、25 kHz channel from 108,000 MHz to 111,975 MHz. The present document applies to “aeronautical mobile (airborne and as applicable also ground vehicles)“ equipment which will hereinafter be referred to as “mobile“ equipment. The scope of the present document is limited to mobile stations. The equivale

44、nt specification for ground stations is ETSI EN 301 842 i.1. A description of the scope of the VDL Mode 4 system is provided in part 2 of ETSI EN 302 842-2 6, clause 1. ETSI EN 302 842-1 5 deals with tests of the physical layer, ETSI EN 302 842-2 6 deals with core link layer functionality and ETSI E

45、N 302 842-3 7 with additional broadcast functionality. The present document deals with tests of the datalink layer (DLS) and the link layer sufficient to support point-to-point functionality. Note that, as described in ETSI EN 302 842-2 6, a system supporting point-to-point functionality is required

46、 to conform to ETSI EN 302 842-1 5, ETSI EN 302 842-2 6 and the specification in the present document. The present document is organized as follows: clause 2 provides references to relevant documents; clause 3 provides general definitions, abbreviations and symbols used; clause 4 describes the VDL M

47、ode 4 mobile station point-to-point functions; clause 5 provides performance specifications for the VDL Mode 4 mobile station; clause 6 provides general design requirements; clause 7 provides protocol tests for the point-to-point functions of the system; annex A provides a detailed cross-reference t

48、o the relevant requirements contained in ICAO VDL4 Technical Manual 1. Note that the system can support a very wide range of functions. It is not practical to provide specific tests for all aspects of functionality. The approach used is to provide detailed tests for the core point-to-point functiona

49、lity and to provide tests of those remaining requirements which, if wrongly implemented, could cause a deterioration in the service offered by other VDL Mode 4 stations. Mandating and Recommendation Phrases a) “Shall“: - The use of the word “Shall“ indicates a mandated criterion; i.e. compliance with the particular procedure or specification is mandatory and no alternative may be applied. ETSI ETSI EN 302 842-4 V1.3.1 (2015-04) 9 b) “Should“: - The use of the word “Should“ (and phrases such as “It is rec