ETSI EN 302 977-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14 12 GHz frequency bands covering th.pdf

1、 ETSI EN 302 977 V2.1.1 (2016-06) Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI

2、 EN 302 977 V2.1.1 (2016-06) 2 Reference REN/SES-00398 Keywords antenna, earth station, GSO, regulation, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enr

3、egistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present d

4、ocument shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive w

5、ithin ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the pr

6、esent document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as author

7、ized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUG

8、TESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associati

9、on. ETSI ETSI EN 302 977 V2.1.1 (2016-06) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Sy

10、mbols 12g33.3 Abbreviations . 12g34 Technical requirements specifications . 13g34.1 General . 13g34.1.1 Environmental profile . 13g34.1.2 Operational configurations . 14g34.1.3 Determination of geographic location of the VMES 14g34.1.4 VMES states and radio states 14g34.2 Conformance requirements 15

11、g34.2.1 Off-axis spurious radiation . 15g34.2.1.1 Justification . 15g34.2.1.2 Specification 16g34.2.1.3 Conformance tests . 17g34.2.2 On-axis spurious radiation for VMES 17g34.2.2.1 Justification . 17g34.2.2.2 Specification 17g34.2.2.2.1 “Carrier-on“ radio state 17g34.2.2.2.2 “Carrier-off“ and “Emis

12、sions-disabled“ radio states 17g34.2.2.3 Conformance tests . 18g34.2.3 Off-axis e.i.r.p. emission density within the band . 18g34.2.3.0 General 18g34.2.3.1 Justification . 18g34.2.3.2 Specification 18g34.2.3.3 Conformance tests . 19g34.2.4 Carrier suppression . 19g34.2.4.1 Justification . 19g34.2.4.

13、2 Specification 20g34.2.4.3 Conformance tests . 20g34.2.5 Antenna pointing and polarization alignment for VMESs 20g34.2.5.1 Justification . 20g34.2.5.2 Specification 20g34.2.5.3 Conformance tests . 21g34.2.6 Cessation of emissions of the VMES 21g34.2.6.1 Justification . 21g34.2.6.2 Specification 21g

14、34.2.6.2.1 Specification 1: Mode of cessation of emissions . 21g34.2.6.2.2 Specification 2: Conditions under which the VMES sahllt cease emissions . 22g34.2.6.2.3 Specification 3: Cessation of emissions 22g34.2.6.2.4 Specification 4: Fault conditions . 22g34.2.6.3 Conformance tests. 22g34.2.7 Identi

15、fication of the VMES . 23g34.2.7.1 Justification . 23g34.2.7.2 Specification 23g34.2.7.3 Conformance tests . 23g3ETSI ETSI EN 302 977 V2.1.1 (2016-06) 4 4.2.8 Control and Monitoring Functions (CMFs) 23g34.2.8.1 CMF state diagram 23g34.2.8.2 Processor monitoring 24g34.2.8.2.1 Justification . 24g34.2.

16、8.2.2 Specification 24g34.2.8.2.3 Conformance tests . 25g34.2.8.3 Transmit subsystem monitoring 25g34.2.8.3.1 Justification . 25g34.2.8.3.2 Specification 25g34.2.8.3.3 Conformance tests . 25g34.2.8.4 Power-on/Reset . 25g34.2.8.4.1 Justification . 25g34.2.8.4.2 Specification 25g34.2.8.4.3 Conformance

17、 tests . 25g34.2.8.5 Control Channel (CC) and Response Channel (RC) . 25g34.2.8.5.1 Justification . 25g34.2.8.5.2 Specification 26g34.2.8.5.3 Conformance tests . 26g34.2.8.6 Network control commands 26g34.2.8.6.1 Justification . 26g34.2.8.6.2 Specification 27g34.2.8.6.3 Conformance tests . 27g34.2.8

18、.7 Initial burst transmission . 27g34.2.8.7.1 Justification . 27g34.2.8.7.2 Specification 27g34.2.8.7.3 Conformance tests . 28g34.2.8.8 Inhibition of transmissions 28g34.2.8.8.1 Justification . 28g34.2.8.8.2 Specification 28g34.2.8.8.3 Conformance tests . 28g34.2.9 Receive antenna off-axis gain patt

19、ern . 28g34.2.9.1 Justification . 28g34.2.9.2 Specification 28g34.2.9.3 Conformance tests . 29g34.2.10 Blocking performance . 29g34.2.10.1 Justification . 29g34.2.10.2 Specification 29g34.2.10.3 Conformance tests . 29g34.2.11 Adjacent Signal Selectivity . 29g34.2.11.1 Justification . 29g34.2.11.2 Sp

20、ecification 29g34.2.11.3 Conformance tests . 30g35 Testing for compliance with technical requirements 30g35.1 Environmental conditions for testing . 30g35.2 Essential radio test suites 30g36 Test methods for all aspects of the VMES . 30g36.1 General . 30g36.2 Off-axis spurious radiation . 31g36.2.0

21、General 31g36.2.1 Test method 31g36.3 On-axis spurious radiation 31g36.3.0 General 31g36.3.1 Test method 31g36.4 Off-axis e.i.r.p. emission density within the band 32g36.4.0 General 32g36.4.1 Test method 32g36.4.1.1 General 32g36.4.1.2 Transmit output power density 32g36.4.1.3 Antenna transmit gain

22、. 32g36.4.1.4 Antenna transmit radiation patterns 33g3ETSI ETSI EN 302 977 V2.1.1 (2016-06) 5 6.4.2 Computation of results 33g36.5 Carrier suppression . 33g36.5.1 Test method 33g36.6 Antenna pointing for VMES 33g36.6.1 General 33g36.6.2 Test method 33g36.7 Antenna mechanical stability . 34g36.7.1 Te

23、st method 34g36.8 Polarization angle alignment capability . 34g36.8.0 General 34g36.8.1 Test method 34g36.9 Cessation of emissions of the VMES . 35g36.9.0 General 35g36.9.1 Test Method 35g36.9.1.1 Required documentation . 35g36.9.1.2 Cessation of emissions from the “Transmission-enabled“ state 35g36

24、.9.1.3 Cessation of emission from the “Transmission-disabled“ state . 35g36.9.1.4 Cessation of emission from the “Initial Phase“ state . 36g36.9.1.4.1 EUTs transmitting initial bursts . 36g36.9.1.4.2 EUTs not transmitting initial bursts . 36g36.9.1.5 “Single action“ means of cessation of emissions.

25、36g36.9.1.6 Fault conditions. 37g36.10 Identification of VMES 37g36.10.1 Test arrangement 37g36.10.2 Test method 37g36.11 Control and monitoring functions 38g36.11.0 General 38g36.11.1 Test arrangement 38g36.11.2 Processor monitoring-Test method . 38g36.11.3 Transmit subsystem monitoring-Test method

26、 . 38g36.11.4 Power-on/Reset-Test method 38g36.11.5 Control Channel and Response Channel-Test method 39g36.11.6 Network Control commands-Test method 40g36.11.7 Initial burst transmission-Test method 41g36.11.8 Inhibition of transmission-Test method 41g36.12 Receive antenna off-axis gain pattern 41g3

27、6.12.1 Test Method 41g36.12.1.1 Test site . 41g36.12.1.2 Method of measurement 42g36.13 Blocking performance 42g36.13.1 Test method 42g36.14 Adjacent Signal Selectivity 43g36.14.1 Test method 43g3Annex A (normative): Relationship between the present document and the essential requirements of Directi

28、ve 2014/53/EU . 44g3Annex B (informative): Mechanical stability methodology 46g3Annex C (informative): Typical Scan and Acceleration Rates . 48g3Annex D (informative): Bibliography . 49g3History 50g3ETSI ETSI EN 302 977 V2.1.1 (2016-06) 6 Intellectual Property Rights IPRs essential or potentially es

29、sential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs not

30、ified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as

31、 to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations and

32、 Systems (SES). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.5 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making

33、available on the market of radio equipment and repealing Directive 1999/5/EC 9. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the sc

34、ope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of this EN: 12 May 2016 Date of latest announcement of this EN (doa): 31 August 2016 Date of latest

35、 publication of new National Standard or endorsement of this EN (dop/e): 28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not

36、“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of sta

37、ndards developed by ETSI and is designed to fit in a modular structure to cover all radio equipment within the scope of the RE Directive 9. The modular structure is shown in ETSI EG 201 399 i.2. ETSI ETSI EN 302 977 V2.1.1 (2016-06) 7 1 Scope The present document applies to Earth Stations located on

38、 board Vehicles, which have the following characteristics. In-vehicle Services Interface Stabilization Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz“. 4 CENELEC EN 60529 (1991): “Degrees of protection provided by enclosures (IP

39、code)“. 5 CENELEC EN 60068-2-6 (2008): “Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)“. 6 CENELEC EN 60068-2-11 (1999): “Environmental testing - Part 2-11: Tests - Test Ka: Salt mist“. 7 CENELEC EN 60068-2-27 (2007): “Environmental testing - Part 2-27: Tests - Test Ea and

40、 guidance: Shock“. ETSI ETSI EN 302 977 V2.1.1 (2016-06) 9 8 MIL STD 810F (2000): “DOD Test Method Standard for Environmental Engineering Considerations and Laboratory Tests“. 9 Directive 2014/53/EU of the European Parlament and of the Council of 16 April 2014 on the harmonisation of the laws of the

41、 Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (RE Directive). 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific refer

42、ences, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The followin

43、g referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Void. i.2 ETSI EG 201 399: “Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards fo

44、r application under the Radio Guidelines for determining the parts of satellite earth station antenna radiation patterns concerned by the geostationary satellite orbit protection“. i.4 ETSI TR 102 215: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended approach, and possibl

45、e limits for measurement uncertainty for the measurement of radiated electromagnetic fields above 1 GHz“. i.5 Commission implementing decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunicat

46、ions Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU 9 and the f

47、ollowing apply: ancillary equipment: equipment used in connection with a VMES is considered as ancillary if the three following conditions are met: the equipment is intended for use in conjunction with the VMES to provide additional operational and/or control features (e.g. to extend control to anot

48、her position or location); and the equipment cannot be used on a stand alone basis, to provide user functions independently of the VMES; and the absence of the equipment does not inhibit the operation of the VMES. Antenna Control Facility (ACF): set of functional entities that, at system level, moni

49、tor and control the correct operation of the VMES and, if appropriate, all of the VMESs in a network ETSI ETSI EN 302 977 V2.1.1 (2016-06) 10 antenna controller: equipment used to maintain antenna stabilization and tracking accuracy based on inputs from the Control and Monitoring Function applicant: manufacturer or his authorized representative within the European Community or the person responsible for placing the apparatus on the market carrier-off radio state: radio state in which the VMES may transmit and does not transmit any carrier N