ETSI EN 303 098-2016 Maritime low power personal locating devices employing AIS Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014 53 EU (_1.pdf

1、 ETSI EN 303 098 V2.1.1 (2016-05) Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 303 098 V2.1.1 (2016-05) 2 Reference REN/ERM-TG26-146 Keywords ha

2、rmonised standard, maritime, radio, SAR, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notic

3、e The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizat

4、ion of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aw

5、are that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following s

6、ervices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version

7、 shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registere

8、d for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 303 098 V2.1.1 (2016-05) 3 Contents Intellectual

9、Property Rights 7g3Foreword . 7g3Modal verbs terminology 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbreviations . 10g34 General requirements . 10g34.1 Construction . 1

10、0g34.1.0 General 10g34.1.1 Categories of equipment . 11g34.2 Controls 11g34.3 Indicators 11g34.4 Identifier (user ID) 12g34.5 Labelling. 12g34.6 Instructions . 12g34.7 Power source 12g34.7.1 Battery requirements . 12g34.7.2 Battery capacity 13g34.7.3 Safety precautions. 13g35 Technical requirements

11、13g35.1 General . 13g35.2 AIS transmission characteristics . 13g35.2.0 General 13g35.2.1 AIS messages 14g35.2.1.0 General 14g35.2.1.1 Active mode 14g35.2.1.2 Test mode 14g35.2.2 Synchronization 14g35.2.2.0 General 14g35.2.2.1 Active mode 14g35.2.2.2 Test mode 14g35.2.3 GNSS position source . 15g35.2

12、.3.0 General 15g35.2.3.1 UTC. 15g35.2.3.2 UTC parameters storage 15g35.2.4 Required settings 15g35.2.5 Minimum transmitter performance characteristics . 16g35.2.6 VHF Data Link (VDL) Access . 16g35.2.6.0 General 16g35.2.6.1 Active mode 16g35.2.6.2 Test mode 17g36 General conditions of measurement .

13、17g36.1 Conformity testing 17g36.2 Test Frequencies . 17g36.3 Identifier (user ID) 17g36.4 Artificial Antenna . 17g36.5 Test signals . 18g36.5.0 General 18g36.5.1 Standard test signal number 1 . 18g3ETSI ETSI EN 303 098 V2.1.1 (2016-05) 4 6.5.2 Standard test signal number 2 . 18g36.5.3 Standard test

14、 signal number 3 . 18g36.5.4 Reference timing signal 18g36.6 Test conditions power sources and ambient temperatures 18g36.6.1 Normal and extreme test conditions 18g36.6.2 Test power source . 18g36.7 Normal test conditions 18g36.7.1 Normal temperature and humidity 18g36.7.2 Normal test voltage . 18g3

15、6.8 Extreme test conditions 19g36.8.1 Extreme temperatures . 19g36.8.2 Extreme test voltages 19g36.8.2.1 Upper extreme test voltage 19g36.8.2.2 Lower extreme test voltage . 19g37 Environmental tests 19g37.1 Introduction 19g37.2 Procedure 19g37.3 Performance check . 19g37.4 Drop test . 19g37.4.1 Defi

16、nition 19g37.4.2 Test conditions 20g37.4.3 Method of measurement . 20g37.4.4 Requirements 20g37.5 Temperature tests . 20g37.5.1 Definition 20g37.5.2 Dry heat test 20g37.5.2.1 Method of measurement 20g37.5.2.2 Requirements 21g37.5.3 Damp heat test 21g37.5.3.1 Method of measurement 21g37.5.3.2 Require

17、ments 21g37.5.4 Low temperature test 21g37.5.4.1 Method of measurement 21g37.5.4.2 Requirements 21g37.5.5 Low temperature battery endurance test . 21g37.5.5.1 Method of measurement 21g37.5.5.2 Requirements 22g37.6 Vibration test 22g37.6.1 Definition 22g37.6.2 Method of measurement . 22g37.6.3 Requir

18、ement 22g37.7 Corrosion test . 22g37.7.1 Definition 22g37.7.2 Method of measurement . 23g37.7.3 Requirements 23g37.8 Thermal shock test 23g37.8.1 Definition 23g37.8.2 Method of measurement . 23g37.8.3 Requirements 24g37.9 Buoyancy test . 24g37.9.1 Definition 24g37.9.2 Method of measurement . 24g37.9

19、.3 Requirements 24g37.10 Compass safe distance test . 24g37.10.1 Definition 24g37.10.2 Method of measurement . 24g37.10.3 Requirements 25g37.11 Solar radiation test 25g37.11.0 Applicability . 25g37.11.1 Definition 25g37.11.2 Method of measurement . 25g3ETSI ETSI EN 303 098 V2.1.1 (2016-05) 5 7.11.3

20、Requirements 26g37.12 Oil resistance test 26g37.12.0 Applicability . 26g37.12.1 Definition 26g37.12.2 Method of measurement . 26g37.12.3 Requirements 26g37.13 Protection of the transmitter . 26g37.13.1 Definition 26g37.13.2 Method of measurement . 27g37.13.3 Requirement 27g38 Tests on the AIS transm

21、itter . 27g38.1 Frequency error 27g38.1.1 Definition 27g38.1.2 Method of measurement . 27g38.1.3 Limit . 27g38.2 Conducted Power . 27g38.2.0 Purpose . 27g38.2.1 Definition 27g38.2.2 Method of measurement under normal test conditions . 27g38.2.3 Limit . 28g38.3 Maximum Effective Radiated Power (ERP).

22、 28g38.3.1 Definition 28g38.3.2 Method of measurement . 28g38.3.3 Limits 28g38.4 Transmitter spectrum mask 29g38.4.1 Definition 29g38.4.2 Method of measurement . 29g38.4.3 Limit . 29g38.5 Transmitter transient behaviour (output power) . 30g38.5.1 Definition 30g38.5.2 Method of measurement . 31g38.5.

23、3 Limit . 31g38.6 Transmitter Transient Behaviour (frequency deviation) 31g38.6.1 Definition 31g38.6.2 Method of measurement . 31g38.6.3 Limit . 32g38.7 Synchronization accuracy . 33g38.7.1 Definition 33g38.7.2 Method of measurement . 33g38.7.3 Limit . 34g38.8 Spurious emissions . 34g38.8.1 Definiti

24、on 34g38.8.2 Method of measurement . 34g38.8.3 Limit . 34g39 VDL Link layer tests 35g39.1 Active mode tests . 35g39.1.0 Precaution . 35g39.1.1 Method of measurement . 35g39.1.2 Initialization period - Required results 35g39.1.3 Message content of Message 1 - Required results 35g39.1.4 Message conten

25、t of Message 14 - Required results 36g39.1.5 Transmission schedule for Message 1 - Required results . 36g39.1.6 Communication state of Message 1 - Required results . 36g39.1.7 Transmission schedule of Message 14 - Required results. 37g39.1.8 Transmission with lost GNSS - Required results 37g39.2 Tes

26、t mode tests with GNSS data available . 37g39.2.1 Method of measurement . 37g39.2.2 Required results 37g39.3 Test mode tests without GNSS data available 38g39.3.1 Method of measurement . 38g3ETSI ETSI EN 303 098 V2.1.1 (2016-05) 6 9.3.2 Required results 38g310 Testing for compliance with technical r

27、equirements 38g310.1 Environmental conditions for testing . 38g310.2 Interpretation of the measurement results 38g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 39g3Annex B (normative): Locating device message bursts 40g3B.1 A

28、ctive mode . 40g3B.2 Test mode . 41g3B.3 Default message field values 42g3Annex C (normative): Additional Test Supports 43g3C.1 Float-free support . 43g3Annex D (informative): Bibliography . 44g3History 45g3ETSI ETSI EN 303 098 V2.1.1 (2016-05) 7 Intellectual Property Rights IPRs essential or potent

29、ially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential,

30、IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be

31、given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic comp

32、atibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.5 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member St

33、ates relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confer

34、s, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive and associated EFTA regulations. National transposition dates Date of adoption of this EN: 16 May 2016 Date of latest announcement of this EN (doa):

35、31 August 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“,

36、“need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 303 098 V2.1.1

37、(2016-05) 8 1 Scope The present document lays down the minimum requirements for low power maritime personal locating devices employing AIS The present document does not cover requirements for the integrated GNSS receiver providing locating function. The present document incorporates the relevant pro

38、visions of the International Telecommunication Union (ITU) radio regulations i.4 included in Recommendation ITU-R M.1371-5 1. For this application, both the radiated power and the length of time of operation are limited to enable the equipment to be sufficiently small and light to be worn comfortabl

39、y at all times and to limit the operating range to a local area. The present document also specifies technical characteristics, methods of measurement and required test results. The present document contains requirements to demonstrate that “. Radio equipment shall be so constructed that it both eff

40、ectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference“ i.1. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only

41、the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hype

42、rlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 Recommendation ITU-R M.1371-5 (02/2014): “Technical characteristics for an automatic i

43、dentification system using time-division multiple access in the VHF maritime mobile band“. 2 CENELEC EN 61108-1 (2003): “Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Perf

44、ormance standards, methods of testing and required test results“. 3 CENELEC EN 61108-2 (1998): “Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance stan

45、dards, methods of testing and required test results“. 4 CENELEC EN 61108-3 (2010): “Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test resu

46、lts“. 5 Recommendation ITU-T O.153 (10/1992): “Basic parameters for the measurement of error performance at bit rates below the primary rate“. 6 IMO Annex 11 - Resolution MSC.149(77) - (adopted on 3 June 2003): “Adoption of the revised performance standards for survival craft portable two-way VHF ra

47、diotelephone apparatus“. 7 ETSI TS 103 052 (V1.1.1) (03-2011): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiated measurement methods and general arrangements for test sites up to 100 GHz“. ETSI ETSI EN 303 098 V2.1.1 (2016-05) 9 2.2 Informative references References are eithe

48、r specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks i

49、ncluded in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.2 ETSI TR 100 028-1 (V1.4.1) (12-2