ETSI EN 303 132-2017 Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC) Harmonised Standard covering the essential requirements of article 3.pdf

1、 ETSI EN 303 132 V1.1.1 (2017-03) Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 303 132 V1.1.1 (2017-03) 2 Reference

2、DEN/ERM-TG26-108 Keywords harmonised standard, maritime, radio, SAR, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0

3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without

4、the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the p

5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comme

6、nt to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. Th

7、e content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are T

8、rade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 303 132 V1.1.1 (2017-

9、03) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviations . 9g34 General requirements

10、 10g34.1 Construction 10g34.1.1 General 10g34.1.2 Categories of equipment . 10g34.2 Controls 10g34.3 Indicators 11g34.3.1 General 11g34.3.2 Audible indicators . 11g34.3.3 Visual indicators . 11g34.4 Self ID 11g34.5 Own vessel MMSI 12g34.6 Labelling . 12g34.7 Instructions . 12g34.8 Position indicatio

11、n 12g34.9 Power source . 13g34.9.1 Battery requirements . 13g34.9.2 Battery capacity 13g34.9.3 Safety precautions . 13g35 Technical requirements 13g35.1 General . 13g35.2 DSC transmission characteristics . 14g35.3 DSC messages and protocols 14g35.4 Position indication 15g36 General conditions of mea

12、surement . 15g36.1 Conformity testing 15g36.2 Test Frequencies . 15g36.3 Unique identifier (self ID) 15g36.4 Artificial Antenna . 15g36.5 Normal Test Modulation 15g36.6 Standard test signals for DSC . 15g36.7 Determination of the DSC symbol error ratio 16g36.8 Test conditions power sources and ambie

13、nt temperatures 16g36.8.1 Normal and extreme test conditions 16g36.8.2 Test power sources 16g36.9 Normal test conditions 16g36.9.1 Normal temperature and humidity 16g36.9.2 Normal test voltage 16g36.10 Extreme test conditions . 16g36.10.1 Extreme temperatures 16g36.10.2 Extreme test voltages . 17g36

14、.10.2.1 Upper extreme test voltage 17g36.10.2.2 Lower extreme test voltage . 17g3ETSI ETSI EN 303 132 V1.1.1 (2017-03) 4 6.11 Reference Bandwidths for emission measurements . 17g37 Environmental tests 17g37.1 Introduction 17g37.2 Procedure 17g37.3 Performance check . 17g37.4 Drop test . 18g37.5 Temp

15、erature tests . 18g37.6 Vibration test 18g37.7 Corrosion test . 18g37.8 Thermal shock test 18g37.9 Buoyancy test . 18g37.10 Compass safe distance test . 18g37.11 Solar radiation test 18g37.12 Oil resistance test 18g37.13 Protection of the transmitter . 18g38 Tests on the DSC transmitter . 19g38.1 Fr

16、equency error . 19g38.1.1 Definition 19g38.1.2 Method of measurement 19g38.1.3 Limit . 19g38.2 Conducted Power 19g38.2.0 Purpose 19g38.2.1 Definition 19g38.2.2 Method of measurement under normal test conditions . 19g38.2.3 Limit . 19g38.3 Maximum Effective Radiated Power (ERP). 20g38.3.1 Definition

17、20g38.3.2 Method of measurement 20g38.3.3 Limits 20g38.4 Adjacent channel power 20g38.4.1 Definition 20g38.4.2 Method of measurement 20g38.4.3 Limit 21g38.5 Transmitter transient behaviour 21g38.5.1 Definition 21g38.5.2 Method of measurement 21g38.5.3 Limit 21g38.6 Residual modulation of the transmi

18、tter 21g38.6.1 Definition 21g38.6.2 Method of measurement 21g38.6.3 Limit 21g38.7 Frequency error (demodulated DSC signal) . 21g38.7.1 Definition 21g38.7.2 Method of measurement . 21g38.7.3 Limit . 21g38.8 Modulation index for DSC . 21g38.8.1 Definition 21g38.8.2 Method of measurement . 22g38.8.3 Li

19、mit . 22g38.9 Modulation rate for DSC 22g38.9.1 Definition 22g38.9.2 Method of measurement . 22g38.9.3 Limit . 22g38.10 Spurious emissions 22g38.10.1 Definition 22g38.10.2 Method of measurement 22g38.10.3 Limit 22g39 Tests on the DSC receiver . 23g39.1 Maximum usable sensitivity . 23g39.1.1 Definiti

20、on 23g3ETSI ETSI EN 303 132 V1.1.1 (2017-03) 5 9.1.2 Method of measurement . 23g39.1.3 Limit 23g39.2 Co-channel rejection. 23g39.2.1 Definition 23g39.2.2 Method of measurement . 23g39.2.3 Limit 23g39.3 Adjacent channel selectivity . 23g39.3.1 Definition 23g39.3.2 Method of measurement . 23g39.3.3 Li

21、mit 23g39.4 Spurious response and blocking immunity . 24g39.4.1 Definition 24g39.4.2 Method of measurement . 24g39.4.3 Limit 24g39.5 Intermodulation response . 24g39.5.1 Definition 24g39.5.2 Method of measurement . 24g39.5.3 Limit 24g39.6 Dynamic range . 24g39.6.1 Definition 24g39.6.2 Method of meas

22、urement . 24g39.6.3 Limit 24g310 Interoperability Testing . 25g310.1 Active mode tests . 25g310.1.1 Listen Before Talk (LBT) . 25g310.1.1.1 Method of measurement 25g310.1.1.2 Required Results . 25g310.1.2 First and second individual distress relay transmissions . 25g310.1.2.1 Method of measurement 2

23、5g310.1.2.2 Required Results . 25g310.1.3 First open loop distress transmission 26g310.1.3.1 Method of measurement 26g310.1.3.2 Required Results . 26g310.1.4 Open loop distress repeat transmissions . 27g310.1.4.1 Method of measurement 27g310.1.4.2 Required Results . 27g310.2 Test mode tests with GNS

24、S signals present . 28g310.2.1 Listen Before Talk (LBT) . 28g310.2.1.1 Method of measurement 28g310.2.1.2 Required Results . 28g310.2.2 Test message transmission (unacknowledged) . 28g310.2.2.1 Method of measurement 28g310.2.2.2 Required Results . 28g310.2.3 Test message transmission (acknowledged)

25、. 29g310.2.3.1 Method of measurement 29g310.2.3.2 Required Results . 29g310.3 Test mode tests with no GNSS signals present 29g310.3.1 Method of measurement . 29g310.3.2 Required results 29g311 Testing for compliance with technical requirements 30g311.1 Environmental conditions for testing . 30g311.2

26、 Interpretation of the measurement results 30g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 31g3Annex B (informative): Change History 33g3History 34g3ETSI ETSI EN 303 132 V1.1.1 (2017-03) 6 Intellectual Property Rights IPRs

27、 essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or pot

28、entially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI.

29、No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee

30、Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.7 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the l

31、aws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given

32、 in Table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive and associated EFTA regulations. National transposition dates Date of adoption of this EN: 27 February 2017 Date of latest announ

33、cement of this EN (doa): 31 May 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 November 2017 Date of withdrawal of any conflicting National Standard (dow): 30 November 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“,

34、 “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI E

35、TSI EN 303 132 V1.1.1 (2017-03) 7 1 Scope The present document lays down the minimum requirements for low power maritime personal locating beacons employing DSC signalling according to ETSI EN 300 338-6 1, on the VHF maritime mobile frequency band channel 70. Maritime personal locating beacons emplo

36、ying DSC signalling also include AIS with an integrated GNSS receiver to provide the locating function according to ETSI EN 303 098 2. The present document incorporates the relevant provisions of the International Telecommunication Union (ITU) radio regulations i.4 included in Recommendation ITU-R M

37、.493-14 3. The present document does not cover requirements for the integrated GNSS receiver providing the locating function. LBT (Listen Before Talk) techniques are employed to improve spectrum efficiency. For this application, both the radiated power and the length of time of operation are limited

38、 to enable the equipment to be sufficiently small and light to be worn comfortably at all times and to limit the operating range to a local area. The present document also specifies technical characteristics, methods of measurement and required test results. The present document covers the essential

39、 requirements of article 3.2 of Directive 2014/53/EU i.1 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which ar

40、e not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary

41、for the application of the present document. 1 ETSI EN 300 338-6 (V1.1.1) (02-2017): “Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 6: Class M

42、DSC“. 2 ETSI EN 303 098 (V2.1.1) (05-2016): “Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU“. 3 Recommendation ITU-R M.493-14 (09/2015): “Digital selective-calling system for use in the mariti

43、me mobile service“. 4 IMO Annex 11 - Resolution MSC.149 (77) - (adopted on 3 June 2003): “Adoption of the revised performance standards for survival craft portable two-way VHF radiotelephone apparatus“. 5 ETSI EN 301 025 (V2.2.1) (03-2017): “VHF radiotelephone equipment for general communications an

44、d associated equipment for Class “D“ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU“. 6 ETSI TS 103 052 (V1.1.1) (03-2011): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiated measureme

45、nt methods and general arrangements for test sites up to 100 GHz“. ETSI ETSI EN 303 132 V1.1.1 (2017-03) 8 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited ve

46、rsion applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents a

47、re not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making availab

48、le on the market of radio equipment and repealing Directive 1999/5/EC. i.2 ETSI TR 100 028-1 (V1.4.1) (12-2001): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 1“. i.3 ETSI TR 100 028-2 (V1.4.1) (12-20

49、01): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2“. i.4 ITU-R Radio Regulations (2016). i.5 ETSI TS 101 570-2 (V1.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability Testing for Maritime Digital Selective Calling (DSC) Radios; Part 2: Class A/B Test Descriptions“. i.6 ETSI TS 101 570-3 (V1.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability Testing for Maritime Digi