ETSI EN 303 215-2015 Environmental Engineering (EE) Measurement methods and limits for power consumption in broadband telecommunication networks equipment (V1 3 1)《环境工程 (EE) 宽带通信网设_1.pdf

1、 ETSI EN 303 215 V1.3.1 (2015-04) Environmental Engineering (EE); Measurement methods and limits for power consumption in broadband telecommunication networks equipment EUROPEAN STANDARD ETSI ETSI EN 303 215 V1.3.1 (2015-04) 2 Reference REN/EE-EEPS008 Keywords broadband, energy efficiency, power sup

2、ply ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from

3、: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perce

4、ived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revis

5、ion or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportS

6、taff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorizatio

7、n of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Tr

8、ade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 303 215 V1.3.1 (2015-04) 3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminolog

9、y 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Definition of power consumption . 8g34.1 Definition of power consumption per port of broadband network equipmen

10、t . 8 g34.2 Power consumption taking into account the low-power states . 8g35 Measurement methods 8g35.1 General requirements . 9g35.1.1 Measurement conditions . 9g35.1.2 Measurement instruments requirements . 9g35.1.3 Considered equipment 9g35.1.4 Not considered equipment 10g35.1.5 Measurement refe

11、rence points 10g35.1.6 Traffic profile 11g35.2 Measurement method for DSLAM/MSAN equipment 11g35.2.1 Equipment configuration 11g35.2.2 Reference measurement method . 13g35.3 Measurement method for OLT equipment . 14g35.3.1 Equipment configuration 14g35.3.2 Reference measurement method . 14g35.4 Alte

12、rnative measurement method . 15g35.5 Reporting of the measurements 16g3Annex A (informative): Example hourly traffic distribution profiles . 17g3Annex B (informative): NPC definition and calculation examples 18g3Annex C (informative): Measurement power consumption for DSLAM/MSAN and OLT equipment fo

13、r different number of active ports 19g3History 20g3ETSI ETSI EN 303 215 V1.3.1 (2015-04) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available fo

14、r ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http

15、:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essenti

16、al to the present document. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE). National transposition dates Date of adoption of this EN: 6 April 2015 Date of latest announcement of this EN (doa): 31 July 2015 Date of latest publication

17、of new National Standard or endorsement of this EN (dop/e): 31 January 2016 Date of withdrawal of any conflicting National Standard (dow): 31 January 2016 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “c

18、annot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document defines the energy consumption metrics

19、 and measurement methods for fixed broadband telecommunication network equipment. ETSI ETSI EN 303 215 V1.3.1 (2015-04) 5 1 Scope The present document defines the power consumption metrics, the methodology and the test conditions to measure the power consumption of broadband fixed telecommunication

20、networks equipment. The present document does not cover all possible configuration of equipment but only homogenous configurations. The types of broadband access technologies covered by the present document are the ones widely deployed at the date of publication. Currently, the present document cons

21、iders DSLAM DSL, MSAN, GPON OLT and Point to Point OLT equipment. Other access technologies may be included in further versions of the present document. The present document also considers measurement methodology for VDSL2 equipment with vectoring functionality. In addition to the full power state,

22、power-saving states as defined in DSL standards i.1 and i.2 are also covered. The present document focuses on Network Equipment. The end-user equipment will be handled in another document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or

23、edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected

24、 location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI

25、TS 101 388: “Access Terminals Transmission and Multiplexing (ATTM); Access transmission systems on metallic access cables; Asymmetric Digital Subscriber Line (ADSL) - European specific requirements ITU-T Recommendation G.992.1 modified“. 2 ETSI EN 300 132-2: “Environmental Engineering (EE); Power su

26、pply interface at the input to telecommunications and datacom (ICT) equipment; Part 2: Operated by -48 V direct current (dc)“. 3 ETSI TS 101 271 (V1.1.1): “Access Terminals Transmission and Multiplexing (ATTM); Access transmission system on metallic pairs; Very High Speed digital subscriber line sys

27、tem (VDSL2); ITU-T Recommendation G.993.2 modified“. 4 Void. 5 ETSI ES 201 970: “Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics at a 2-wire analogue presented Network Termination Point (NTP)“. 6 Recommendation

28、ITU-T G.984: “Gigabit-capable passive optical networks (GPON)“. 7 Recommendation ITU-T G.984.2: “Gigabit-capable Passive Optical Networks (G-PON): Physical Media Dependent (PMD) layer specification“. 8 IEEE 802.3: “IEEE Standard for Information technology - Telecommunications and information exchang

29、e between systems -Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications“. 9 Broadband Forum TR-100: “ADSL2/ADSL2plus; Performance Test Plan“. 10 Broadband Forum TR-114:

30、“VDSL2 Performance Test Plan“. ETSI ETSI EN 303 215 V1.3.1 (2015-04) 6 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific refe

31、rences, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application

32、 of the present document but they assist the user with regard to a particular subject area. i.1 Recommendation ITU-T G.992.3 (2005): “Asymmetric digital subscriber line transceivers 2 (ADSL2)“. i.2 Recommendation ITU-T G.992.5 (2005): “Asymmetric Digital Subscriber Line (ADSL) transceivers - Extende

33、d bandwidth ADSL2 (ADSL2plus)“. i.3 Recommendation ITU-T G.993.2 (2006): “Very high speed digital subscriber line 2 (VDSL2)“. i.4 ETSI TR 102 530: “Environmental Engineering (EE); The reduction of energy consumption in telecommunications equipment and related infrastructure“. i.5 Broadband Forum TR-

34、202: “ADSL2/ADSL2plus Low-Power Mode Guidelines“. i.6 Void. i.7 IEC 60050: “International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements -

35、Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument“. NOTE: Available at http:/webstore.iec.ch/webstore/webstore.nsf/artnum/027448!opendocument. i.8 IEC 62018: “Power consumption of information technology equipment - Measurement methods“

36、. NOTE: Equivalent to CENELEC EN 62018. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: accuracy (of a measuring instrument): quality which characterizes the ability of a measuring instrument to provide an indicated

37、 value close to a true value of the measurand NOTE 1: This term is used in the “true value“ approach. NOTE 2: Accuracy is all the better when the indicated value is closer to the corresponding true value. NOTE 3: See IEC 60050 i.7, definition (311-06-08). active line: line in operational mode and ca

38、rrying traffic as specified for that mode of operation (ADSL2plus or VDSL2) broadband telecommunication network equipment: equipment of broadband technology that is part of a telecommunication network broadband terminal equipment: equipment of broadband technology that is connected beyond the Networ

39、k Termination Point of a telecommunication network ETSI ETSI EN 303 215 V1.3.1 (2015-04) 7 full-power state: state in which the maximal allowed data transmission is possible NOTE: The maximum is defined by the physical properties of the line and the settings of the operator (e.g. L0 for ADSL2/2plus)

40、. low-power state: state in which a limited power reduction capability and a limited data transmission is allowed NOTE: It is entered automatically from the full power state after the data transmission during a certain time is lower than the limit. If more than the limited data has to be transmitted

41、 from either side a state change to the full power state is entered automatically. The low power state may comprise multiple sub-states with history dependant state transition rules (e.g. L2 for ADSL2/2plus). power consumption: power used by a device to achieve an intended application performance st

42、and-by state: state in which the largest power reduction capability and no transmission of data is possible NOTE: From this state a direct state change to the full-transmission state is possible, if data has to be transmitted from either side (e.g. L3 for ADSL2/2plus). telecommunication network: net

43、work operated under a license granted by a national telecommunications authority, which provides telecommunications between Network Termination Points (NTPs) (i.e. excluding terminal equipment beyond the NTPs) 3.2 Abbreviations For the purposes of the present document, the following abbreviations ap

44、ply: AC Alternative Current ADSL Asymmetric Digital Subscriber Line ADSL2plus Second generation ADSL with extended bandwidth BBF Broadband Forum CPE Customer Premises Equipment DBA Dynamic Bandwidth Allocation DC Directive Current DPBO Downstream Power Back-Off DSL Digital Subscriber Line DSLAM Digi

45、tal Subscriber Line Access Multiplexer DSM Dynamic Spectrum ManagementGPON Gigabit Passive Optical Network IP Internet Protocol MAC Media Access Control MELT Metallic Loop Test MIMO Multiple Input Multiple Output MPLS Multiprotocol Label Switching MSAN Multi Service Access Node NPC Normalized Power

46、Consumption OLT Optical Line Termination ONU Optical Network Unit POTS Plain Old Telephone Service PSTN Public Switched Telephone Network QoS Quality of Service SNR Signal Noise RatioSOHO Small Office/Home Office UPBO Upstream Power Back-Off VAC Ventilation Air Conditioning VDSL Very high speed Digi

47、tal Subscriber Line VDSL2 second generation VDSL VLAN Virtual Local Area Network ETSI ETSI EN 303 215 V1.3.1 (2015-04) 8 4 Definition of power consumption 4.1 Definition of power consumption per port of broadband network equipment The power consumption of broadband telecommunication network equipmen

48、t is defined as: PBBport = PBBeq / NportsWhere: PBBeqis the power consumption (in W) of a fully equipped broadband network equipment, measured at the electric power input interface, placed at the premises of the operator or the equipment supplier, which connects multiple broadband subscribers to a b

49、ackbone. PBBeqis measured in determined environmental conditions defined in clause 5.1.1. PBBportis the power consumption per port in W of the broadband network equipment for which the limits are defined in the present document. Nportsis the maximum number of subscriber lines access ports served by the broadband network equipment under test. 4.2 Power consumption taking into account the low-power states The low-power states are intended to reduce the power consumption during periods of no or minimal traffic needs (e.g. low da