ETSI EN 303 406-2017 Short Range Devices (SRD) Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz Harmonised Standard covering the essential requirements _1.pdf

1、 ETSI EN 303 406 V1.1.1 (2017-02) Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 303 406 V1.1.1 (2017-02)

2、 2 Reference DEN/ERM-TG28-529 Keywords alarm, harmonised standard, SRD ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7

3、803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pr

4、ior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present

5、 document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to

6、one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The cont

7、ent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade M

8、arks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 303 406 V1.1.1 (2017-02) 3

9、Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbreviations . 10g34 Technical

10、 requirements specifications . 10g34.1 Environmental profile . 10g34.2 Technical requirements for transmit mode . 10g34.2.1 Applicability . 10g34.2.2 Operating Frequency and Channel 10g34.2.2.1 Description 10g34.2.2.2 Limits 10g34.2.2.3 Conformance . 10g34.2.3 Effective Radiated Power . 10g34.2.3.1

11、Description 10g34.2.3.2 Limits 11g34.2.3.3 Conformance . 11g34.2.4 Duty Cycle 11g34.2.4.1 Description and Applicability . 11g34.2.4.2 Limits 11g34.2.4.3 Conformance . 11g34.2.5 Short term behaviour 11g34.2.5.1 Description and applicability 11g34.2.5.2 Limits 11g34.2.5.3 Conformance . 12g34.2.6 Adjac

12、ent Channel Power for OCW 25 kHz . 12g34.2.6.1 Description and Applicability . 12g34.2.6.2 Limits 12g34.2.6.3 Conformance . 12g34.2.7 Occupied Bandwidth. 12g34.2.7.1 Description and Applicability . 12g34.2.7.2 Limits 12g34.2.7.3 Conformance . 12g34.2.8 Tx Out Of Band Emissions . 13g34.2.8.1 Descript

13、ion and Applicability . 13g34.2.8.2 Limits 13g34.2.8.3 Conformance . 13g34.2.9 Transmitter Frequency Error. 13g34.2.9.1 Description and Applicability . 13g34.2.9.2 Limits 13g34.2.9.3 Conformance . 13g34.2.10 Transmitter Transient Power. 13g34.2.10.1 Description 13g34.2.10.2 Limits 13g34.2.10.3 Confo

14、rmance . 14g34.2.11 Tx Behaviour under Low Voltage Conditions 14g34.2.11.1 Description and Applicability . 14g3ETSI ETSI EN 303 406 V1.1.1 (2017-02) 4 4.2.11.2 Limits 14g34.2.11.3 Conformance . 14g34.3 Technical requirements for all EUT . 14g34.3.1 Applicability . 14g34.3.2 Spurious Emissions . 14g3

15、4.3.2.1 Description 14g34.3.2.2 Limits 14g34.3.2.3 Conformance . 14g34.4 Receiver Parameters . 14g34.4.1 Applicability . 14g34.4.2 Blocking 15g34.4.2.1 Description 15g34.4.2.2 Limits 15g34.4.2.3 Conformance . 15g35 Technical Requirements for Uni-Directional Communication 15g35.1 Mode A Applicability

16、 and Conformance Requirements 15g35.2 Communication method . 15g35.3 Transmitter Parameters . 15g35.4 Receiver Parameters . 15g35.4.1 Applicability . 15g35.4.2 Adjacent Channel Selectivity 15g35.4.2.1 Description 15g35.4.2.2 Limits 16g35.4.3 Blocking 16g35.4.3.1 Description 16g35.4.3.2 Limits 16g35.

17、4.3.3 Conformance . 16g35.4.4 Adjacent Channel Saturation 16g35.4.4.1 Description 16g35.4.4.2 Limits 16g35.4.4.3 Conformance . 16g35.4.5 Spurious Response Rejection 16g35.4.5.1 Description 16g35.4.5.2 Limits 16g35.4.5.3 Conformance . 16g35.4.6 Behaviour at high wanted signal level 17g35.4.6.1 Descri

18、ption 17g35.4.6.2 Limits 17g35.4.6.3 Conformance . 17g36 Bi-Directional Communication with Frequency Agility 17g36.1 Mode BN Applicability and Conformance Requirements 17g36.2 Bi-directional Communication and Frequency Agility 17g36.2.1 Applicability . 17g36.2.2 Acknowledgement 17g36.2.2.1 Descripti

19、on 17g36.2.2.2 Limits 17g36.2.2.3 Conformance . 17g36.2.3 Ability to change communication frequency 18g36.2.3.1 Description 18g36.2.3.2 Limits 18g36.2.3.3 Conformance . 18g36.3 Transmitter Parameters . 18g36.4 Receiver Parameters . 18g36.4.1 Applicability . 18g36.4.2 Adjacent Channel Selectivity 18g

20、36.4.2.1 Description 18g36.4.2.2 Limits 18g36.4.2.3 Conformance . 18g36.4.3 Blocking 18g36.4.3.1 Description 18g3ETSI ETSI EN 303 406 V1.1.1 (2017-02) 5 6.4.3.2 Limits 19g36.4.3.3 Conformance . 19g36.4.4 Adjacent Channel Saturation 19g36.4.4.1 Description 19g36.4.4.2 Limits 19g36.4.4.3 Conformance .

21、 19g36.4.5 Spurious Response Rejection 19g36.4.5.1 Description 19g36.4.5.2 Limits 19g36.4.5.3 Conformance . 19g36.4.6 Behaviour at high wanted signal level 20g36.4.6.1 Description 20g36.4.6.2 Limits 20g36.4.6.3 Conformance . 20g37 Testing for compliance with technical requirements 20g37.1 General .

22、20g37.2 Presentation of equipment for testing purposes 20g37.3 Wanted performance criteria 21g37.3.1 Receiver response . 21g37.4 Radio test suites - Transceivers 21g37.4.1 Frequency Agility . 21g37.4.1.1 Description 21g37.4.1.2 Test Conditions . 21g37.4.1.3 Method of measurement 21g37.4.1.4 Measurem

23、ent procedure 21g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 23g3Annex B (normative): Operating bands and technical parameters 25g3Annex C (informative): Selection of technical parameters . 27g3C.1 Introduction 27g3C.2 Re

24、ceiver sensitivity 27g3C.3 Other receiver parameters 27g3C.4 Transmitter short term behaviour . 27g3C.5 Listen before talk 28g3Annex D (informative): Bibliography . 29g3History 30g3ETSI ETSI EN 303 406 V1.1.1 (2017-02) 6 Intellectual Property Rights IPRs essential or potentially essential to the pre

25、sent document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in r

26、espect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence

27、of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectr

28、um Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.10 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the maki

29、ng available on the market of radio equipment and repealing Directive 1999/5/EC i.2. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of t

30、he scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive and associated EFTA regulations. National transposition dates Date of adoption of this EN: 10 February 2017 Date of latest announcement of this EN (doa): 31 May 2017 Date of

31、latest publication of new National Standard or endorsement of this EN (dop/e): 30 November 2017 Date of withdrawal of any conflicting National Standard (dow): 30 November 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “wi

32、ll not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 303 406 V1.1.1 (2017-02) 7 Introductio

33、n The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio equipment within the scope of the Radio Equipment Directive (RED) i.2. It is recognized that the radio communications link alone does not determine the overall oper

34、ation of a system, but that a functioning radio communications link is an essential foundation upon which a system may be built. The present document sets out various means and features by which the performance of a radio communications link may be improved. These include: 1) Spectrum Access Rules -

35、 with the aim of reducing the probability of collisions between transmissions from different equipment. 2) Receiver Parameters - with the aim of reducing the probability of interference from equipment on other frequencies. 3) Bi-Directional Communications - with the aim of reducing the time and numb

36、er of transmissions required to achieve a given level of confidence in successful communication. 4) Frequency Agility - with the aim of enabling the equipment to change its operating frequency to avoid certain types of interference. Application of these features, separately or in combination, does n

37、ot necessarily ensure successful radio communication. In addition, there are other features that may be considered, such as listen before talk or error correction, that may improve overall performance. Clauses 1 and 3 provide a general description on the types of equipment covered by the present doc

38、ument and the definitions and abbreviations used. Clause 4 specifies technical requirements to be met by all equipment. Clause 5 specifies technical requirements for receivers in equipment with uni-directional communications. Clause 6 specifies technical requirements for equipment with bi-directiona

39、l communications and frequency agility. Clause 7 specifies the methods for testing for compliance with the technical requirements. Annex A summarizes the requirements relevant to the RE-Directive i.2. ETSI ETSI EN 303 406 V1.1.1 (2017-02) 8 1 Scope The present document specifies technical characteri

40、stics and methods of measurements for social alarm systems operating on a range of frequencies that may be shared with other equipment types. Social alarms are defined in Commission Decision 2013/752/EU i.3 as: “Social alarm devices“ are radio communications systems that allow reliable communication

41、 for a person in distress in a confined area to initiate a call for assistance. Typical uses of social alarm are to assist elderly or disabled people. These radio equipment types are capable of operating, for transmission or reception, in all or part of the frequency bands given in table 1. Table 1:

42、 Frequency bands and usage information Frequency band Usage information 169,400 MHz to 169,8125 MHz This band is shared with other SRD equipment 868,600 MHz to 868,700 MHz This band is shared with other SRD alarm equipment 869,250 MHz to 869,400 MHz This band is shared with other SRD alarm equipment

43、 869,650 MHz to 869,700 MHz This band is shared with other SRD alarm equipment 863,000 MHz to 870,000 MHz This band is shared with other SRD equipment, except as noted above 870,000 MHz to 876,000 MHz This band is shared with other SRD equipment 915,000 MHz to 921,000 MHz This band is shared with ot

44、her SRD equipment NOTE 1: The probability of interference may be different when operating in bands shared with other short range devices compared to bands from which other short range devices are excluded. NOTE 2: Social alarms operating in a designated band are covered in ETSI EN 300 220-3-1 i.5. T

45、he present document covers the essential requirements of article 3.2 of Directive 2014/53/EU i.2 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited versio

46、n applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The fol

47、lowing referenced documents are necessary for the application of the present document. 1 ETSI EN 300 220-1 (V3.1.1) (02-2017): “Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement“. 2.2 Informative references Re

48、ferences are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: Whil

49、e any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI EN 303 406 V1.1.1 (2017-02) 9 The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI EG 203 336: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive