ETSI EN 305 174-8-2018 Access Terminals Transmission and Multiplexing (ATTM) Broadband Deployment and Lifecycle Resource Management Part 8 Management of end of life of ICT equipmen.pdf

1、 ETSI EN 305 174-8 V1.1.1 (2018-01) Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 8: Management of end of life of ICT equipment (ICT waste/end of life) EUROPEAN STANDARD ETSI ETSI EN 305 174-8 V1.1.1 (2018-01) 2 Reference DEN/AT

2、TM-0010 Keywords broadband, energy management, e-waste management, ICT, waste management ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture

3、de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modif

4、ied without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Us

5、ers of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please sen

6、d your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission

7、 of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered fo

8、r the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI E

9、N 305 174-8 V1.1.1 (2018-01) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 11g34 Wa

10、ste electrical and electronic equipment (WEEE) 12g34.1 General . 12g34.2 European Union actions on e-waste . 12g34.3 Trans-boundary movements of waste . 13g34.4 Extended Producer Responsibility Principle (EPR) . 13g34.5 European Union ICT WEEE 14g34.5.1 General 14g34.5.2 Collection and recycling of

11、WEEE . 14g34.5.3 Treatment of WEEE 14g35 ICT WEEE . 15g35.1 General . 15g36 Requirements for processing of WEEE within broadband deployment . 16g36.1 General . 16g36.1.1 Application of national legislation 16g36.1.2 Collection of WEEE . 16g36.1.3 Treatment 17g36.2 Management of WEEE within ICT sites

12、, core and access networks 17g36.2.1 Requirements 17g36.2.1.1 Supply Chain . 17g36.2.1.2 Internal organization . 18g36.2.1.3 Extended Producer Responsibility 18g36.2.1.4 Training . 18g36.2.1.5 WEEE in companies network transformation . 18g36.2.1.6 Collection Scheme and partners 19g36.2.1.7 Subscribe

13、r equipment 19g36.2.1.8 Rare resources and valorisation. 19g36.2.1.9 Second-hand and re-use of equipment 19g36.2.2 Recommendations . 20g36.2.3 Management of WEEE within customer premises . 20g36.3 Calculation of recycling and valorisation rates 20g3Annex A (informative): Future structure of this mul

14、ti-part deliverable . 21g3Annex B (informative): Bibliography . 22g3History 23g3ETSI ETSI EN 305 174-8 V1.1.1 (2018-01) 4 List of figures Figure 1: Schematic of fixed and mobile communication networks .15g3ETSI ETSI EN 305 174-8 V1.1.1 (2018-01) 5 List of tables Table 1: Types of EEE producer .14g3T

15、able 2: WEEE in the elements of broadband deployment .16g3ETSI ETSI EN 305 174-8 V1.1.1 (2018-01) 6 Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if an

16、y, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available o

17、n the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or m

18、ay be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no r

19、ight to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This European Standard (EN) has been produced by ETSI Technical Co

20、mmittee Access, Terminals, Transmission and Multiplexing (ATTM). The present document is part 8 of a multi-part deliverable covering lifecycle resource management of broadband deployment as identified below: Part 1: “Overview, common and generic aspects“; Part 2: “ICT sites“; Part 3: “ Core, regiona

21、l metropolitan networks“; Part 4: “Access networks“; Part 5: “Customer network infrastructures; Sub-part 1 Homes (single-tenant)“; Part 6: “Cable accesss networks“; Part 7: “Digital multiservice cities“; Part 8: “Management of end of life of ICT equipment (ICT waste/end of life)“. Other documents ar

22、e planned for development to extend this multi-part deliverable. These are listed in annex A and are mentioned in the present document. National transposition dates Date of adoption of this EN: 24 January 2018 Date of latest announcement of this EN (doa): 30 April 2018 Date of latest publication of

23、new National Standard or endorsement of this EN (dop/e): 31 October 2018 Date of withdrawal of any conflicting National Standard (dow): 31 October 2018 ETSI ETSI EN 305 174-8 V1.1.1 (2018-01) 7 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need

24、 not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The increasing inter

25、action between the different elements of the Information Communication Technology (ICT) sector (hardware, middleware, software and services) supports the concept of convergence in which: multi-service packages can be delivered over a common infrastructure; a variety of infrastructures is able to del

26、iver these packages; a single multi-service-package may be delivered over different infrastructures. As a result of this convergence, the development of new services, applications and content has resulted in: an increased demand for bandwidth, reliability, quality and performance, with a consequent

27、increase in the demand for power which has implications for cost and, in some cases, availability; an associated continuous evolution of ICT equipment. It is therefore important to consider the environmental viability of all network elements necessary to deliver the required services in terms of the

28、 management of their operational aspects i.e. energy management (including energy efficiency) and the management of the End-of-Life (EoL) of the ICT equipment. NOTE: The term “environmental viability“ is used while recognizing that well established treatments of “sustainability“ feature three separa

29、te viability objectives (environmental, economic and social). For the purposes of this multi-part deliverable, only operational aspects of environmental viability are considered. A wider approach to environmental viability takes other factors into account including the use of raw materials and avoid

30、ance of hazardous substances in the construction of infrastructure or ICT equipment- these factors are not considered. New technologies and infrastructure strategies are expected to enable operators to decrease the energy consumption, for a given level of service, of their existing and future infras

31、tructures thus decreasing their costs. This requires a common understanding among market participants that only standards can produce. This multi-part deliverable specifies the general engineering of various broadband infrastructures to enable the most effective energy management (and management of

32、other resources) and the appropriate measures for EoL treatment of ICT equipment. Certain of the standards may specify requirements for interoperability. The present document has been developed against the following background: Waste of Electrical and Electronic Equipment (WEEE) such as the ICT equi

33、pment used within broadband deployment systems and mobile networks has joined computers, televisions, refrigerators and mobile telephones phones as one the fastest growing waste streams in the European Union (EU) and is expected to grow to more than 12 million tonnes by 2020. Further to the 1997 Kyo

34、to Protocol, the European Commission (EC) has issued, and will issue, Directives and Regulations in order to improve e-waste processing of whole industry sectors and producers and users of ICT equipment are obliged to monitor waste processing of that equipment. Independent of national regulation and

35、 legislation concerning WEEE, the present document specifies requirements for processes in relation to management of EoL for ICT equipment used within infrastructures of broadband deployment. The objective of the present document is to specify requirements and recommendations for the ICT sector to c

36、ontribute actively to the WEEE collection objectives as defined in the WEEE Directive. ETSI ETSI EN 305 174-8 V1.1.1 (2018-01) 8 1 Scope The present document is part 8 of a multi-part deliverable which specifies requirements for processes in relation to management of end-of-life of ICT equipment. Th

37、e present document specifies requirements and recommendations for the ICT sector to contribute actively to the WEEE collection objectives as defined in the WEEE Directive. Interpretation of regulation and legislation concerning the topic are outside the outside the scope of the present document and

38、are covered by other standards and regulations. However, information given in the present document may be of assistance in meeting these standards and regulations. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version

39、 number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found

40、at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informativ

41、e references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) appl

42、ies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject

43、 area. i.1 Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) Text with EEA relevance. NOTE Referred to as the “WEEE Directive“. i.2 Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on

44、 the restriction of the use of certain hazardous substances in electrical and electronic equipment Text with EEA relevance. NOTE: Referred to as the “RoHS Directive“. i.3 Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste ba

45、tteries and accumulators and repealing Directive 91/157/EEC (Text with EEA relevance). i.4 ETSI EN 305 174-1: “Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 1: Overview, common and generic aspects“. ETSI ETSI EN 305 174-8 V1.1.1

46、 (2018-01) 9 i.5 Recommendation ITU-T I.113: “Vocabulary of terms for broadband aspects of ISDN“. i.6 Regulation (EC) 1013/2006 of the European Parliament and of the Council of 14 June 2006 on shipments of waste. i.7 Regulation (EC) 1907/2006 of the European Parliament and of the Council of 18 Decem

47、ber 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769

48、/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (Text with EEA relevance). i.8 Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal. i.9 Mandate M/462: “Standardisation mandate addressed to CEN, CENELEC and ETSI in the field

49、 of ICT to enable efficient energy use in fixed and mobile information and communication networks“. i.10 ETSI EN 305 174-3: “Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 3: Core, regional metropolitan networks“. i.11 ETSI EN 305 174-4-1: “Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 4-1: Fixed access networks (excluding cable). i.12 ETSI EN 305 174-4-2: “Access, Terminals, Transmission and Multi