ETSI ES 200 778-3-2002 Access and Terminals (AT) Analogue Access to the Public Switched Telephone Network (PSTN) Protocol Over the Local Loop for Display and Related Services Termi.pdf

1、ETSI ES 200 778-3 1.1.2 (2002-11) ETSI Standard Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Protocol over the Local loop for display and related services; Terminal equipment requirements; Part 3: Protocol Implementation Conformance Statement (PICS) pro

2、forma specification; On-Hook and Off-Hook 2 ETSI ES 200 778-3 VI .I .2 (2002-1 1) Reference RES/AT-030021-03 Keywords CLIP, PICS, PSTN, supplementary service ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017

3、- NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any ca

4、se of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the pr

5、esent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Co

6、ri vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of

7、ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI ES 200 778-3 V

8、I . 1 . 2 (2002-1 1) Contents Intellectual Property Rights 4 Foreword . 4 Introduction 4 1 Scope 5 2 References 5 3 Definitions and abbreviations . 6 3.1 6 3.2 6 4 Conformance 7 Annex A (normative): PICS proforma for ES 200 778.1. ES 200 778-2 and EN 300 659-3 8 A . 1 Guidance for completing the ICs

9、 proforma . 8 A . 1.1 Purposes and structure 8 A . 1.2 Abbreviations and conventions 8 A.1.3 Instructions for completing the PICS proforma 10 A.2 Identification of the implementation 10 A.2.1 Date of the statement 10 A.2.2 Implementation Under Test (IUT) identification . 10 A.2.3 Systemunder Test (S

10、UT) identification 10 A.2.4 Product supplier 11 A.2.5 Client (if different from product supplier) 11 A.2.6 PICS contact person . 12 A.3 Identification of the reference specification type . 12 A.4 Global statement of conformance . 12 A.5 Roles . 13 A.6 TE role 13 A.6.1 Major capabilities . 13 A.6.2 S

11、ervice capabilities . 14 A.6.3 Physical layer . 14 A.6.3.1 Electrical . 14 A.6.3.2 Alerting signal types 15 A.6.3.3 16 A.6.3.4 Criteria for leaving 17 A.6.3.5 17 A.6.3.6 18 A.6.4 Data link 1 19 A.6.4.1 Data link message format 19 A.6.4.2 Data link message types 19 . . A.6.5 Presentation layer 20 A.6

12、.5.1 Call set up message parameters 20 A.6.5.1.1 Message waiting indicator message parameters 22 A.6.5.1.2 Advice of charge message parameters . 23 A.6.5.1.3 Short message service message parameters 23 A.6.5.2 Parameter coding 24 A.6.5.2.1 Call type parameter coding . 24 A.6.5.3 Handling of invalid

13、presentation messages . 25 Annex B (informative): Bibliography . 26 History 27 ETSI 4 ETSI ES 200 778-3 VI .I .2 (2002-1 1) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs,

14、 if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are availab

15、le on the ETSI Web server (htttwp :l;webawpiwi .c tsi .ordIPRhon.ne. am). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETS

16、I Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Access and Terminals (AT). The present document is part 3 of a multi-part deliverable covering the Protocol over the local loop for dis

17、play and related services; Terminal equipment requirements, as identified below: Part 1 : “On-hook data transmission“; Part 2: “Off-hook data transmission“; Part 3: “Protocol Implementation Conformance Statement (PICS) proforma specification; On-Hook and Off-Hook“ ; Part 4: Part 5: “Test Suite Struc

18、ture and Test Purposes (TSS On-Hook and Off-Hook“; “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user; On-Hook and Off-Hook“. Introd U ction To evaluate conformance of a particular implementation, it is necessary t

19、o have a statement of which capabilities and options have been implemented for a given protocol. Such a statement is called an Implementation Conformance Statement (ICs). An ICs stating what capabilities and options have been implemented for a particular protocol is called a protocol ICs. This is co

20、mmonly abbreviated to “PICS“. ETSI 5 ETSI ES 200 778-3 VI .I .2 (2002-1 1) 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the subscriber line protocol for the support of PSTN display services at Local Exchange (LE) in “on-hook“ state defin

21、ed in ES 200 778-1 i and in EN 300 659-3 3 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 5. The present document also provides the Protocol Implementation Conformance Statement (PICS) proforma for the subscriber line protocol for th

22、e support of PSTN display services at Local Exchange (LE) in “off-hook“ state defined in ES 200 778-2 2 and in EN 300 659-3 3 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 5. The supplier of a protocol implementation that is claimed

23、 to conform to either ES 200 778-1 i and EN 300 659-3 3, ES 200 778-2 2 and EN 300 659-3 3 or both is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identisl both the supplier and the implementation

24、. 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subs

25、equent revisions do not apply. For a non-specific reference, the latest version applies. il ETSI ES 200 778-1 (V1.2.2): “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Protocol over the local loop for display and related services; Terminal Equipment requi

26、rements; Part 1 : On-hook data transmission“. ETSI ES 200 778-2 (V1.2.2): “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Protocol over the local loop for display and related services; Terminal Equipment requirements; Part 2: Off-hook data transmission“.

27、21 31 41 ETSI EN 300 659-3 (V1.3.1): “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 3: Data link message and parameter codings“. ETSI EN 300 659-1 (V1.3.1): “Access and

28、 Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 1 : On-hook data transmission“. ISO/IEC 9646-7 (1 995): “Information technology - Open Systems Interconnection - Conformance testing

29、 methodology and framework - Part 7: Implementation Conformance Statements“. ISO/IEC 9646-1 (1994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1 : General concepts“. ETSI 6 ETSI ES 200 778-3 VI .I .2 (2002-1 1) 3 3.1 Definitions and

30、abbreviations De fi nit ions For the purposes of the present document, the terms and definitions given in ES 200 778-1 i, ES 200 778-2 2, EN 300 659-3 3, ISO/IEC 9646-7 5, in particular ISO/IEC 9646-1 6 and the following apply: Implementation Conformance Statement (ICs): statement made by the suppli

31、er of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICs can take several forms: protocol ICs, profile ICs, profile specific ICs, and information object ICs. Protocol Implementation Conformance Statement (PICS): ICs

32、 for an implementation or system claimed to conform to a given protocol specification PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes a PICS 3.2 Abbreviations For the purposes of the present document, the abbreviations defined in

33、ES 200 778-1 i, ES 200 778-2 2, EN 300 659-3 3 and the following apply: AOC-D AOC-E AS CCBS CCNR CLIP CLIR CNIP CNIR CT DC DIT DTMF FSK ICs IUT LE LR MSN MWI PICS PSTN RP-AS SMS SUB SUT TE VPN DT-AS LR+DT-AS TE-ACK Advice Of Charge During the call Advice Of Charge at the End of the call Alerting Sig

34、nal Completion of Calls to Busy Subscriber Completion of Calls on No Reply Calling Line Identification Presentation Calling Line Identification Restriction Calling Name Identification Presentation Calling Name Identification Restriction Connection Type Direct Current Display Information Transfer Dua

35、l Tone-Alerting Signal Dual Tone Multi-Frequency Frequency- Shift Keying Implementation Conformance Statement Implementation Under Test Local Exchange Line Reversal Line Reversal followed by a Dual Tone-Alerting Signal Multiple Subscriber Number Message Waiting Indication Protocol ICs Public Switche

36、d Telephone Network Ringing Pulse Alerting Signal Short Message Service SUBaddressing System Under Test Terminal Equipment TE ACKnowledgernent signal Virtual Private Network ETSI 7 ETSI ES 200 778-3 VI .I .2 (2002-1 1) 4 Conformance A PICS proforma that conforms to this PICS proforma specification s

37、hall be technically equivalent to annex A, and shall preserve the numbering and ordering of the items in annex A. A PICS that conforms to this PICS proforma specification shall: a) describe an implementation which conforms to either both ES 200 778-1 i and EN 300 659-3 3 or both ES 200 778-2 2 and E

38、N 300 659-3 3; be a conforming PICS proforma, which has been completed in accordance with the instructions for completion given in clause A. 1 ; include the information necessary to uniquely identiSl both the supplier and the implementation. b) c) ETSI 8 ETSI ES 200 778-3 VI .I .2 (2002-1 1) Annex A

39、 (normative): PICS proforma for ES 200 778-1, ES 200 778-2 and EN 300 659-3 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used f

40、or its intended purposes and may further publish the completed PICS. A. 1 Guidance for completing the ICs proforma A. 1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in either ES 200 778-1 and

41、EN 300 659-3 or ES 200 778-2 and EN 300 659-3 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses as follows: A. 1 : guidance for completing the various parts of the PICS proforma; A.2: identification of the implementation; A.3: ide

42、ntification of the protocol to which this PICS proforma applies; A.4: global statement of conformance; A.5: roles: A.6: questions to determine roles; A. 1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guid

43、elines presented in ISO/IEC 9646-7. Item column The item column contains an identifier related to the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implement

44、ation?“. Reference column For protocol related items, the reference column makes reference to ES 200 778-1, except where explicitly stated otherwise. For messages and parameters, the reference column makes reference to EN 300 659-3, except where explicitly stated otherwise. ETSI 9 Item item.x ETSI E

45、S 200 778-3 VI .I .2 (2002-1 1) Major capabilities: Reference Conditions for Status support Does the implementation suppo rt. status . CI M item.y I. IMI The status of the item.x is as following: - - NOTE 1 : C 1 and C2 shall be mutually exclusive, when none of the listed conditions is true, the sta

46、tus for the item is When C1 is true: M (mandatory); When C2 is true O (optional). implicitly N/A (not applicable). The item.y item is always mandatory. Status column The following notations, defined in ISO/IEC 9646-7, are used for the status column: M O N/A 0.i mandatory - the capability shall be su

47、pported. optional - the capability may be supported or not. not applicable - in the given context, it is impossible to use the capability. qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the

48、 logic of their selection which is defied immediately following the table. Allowed values column This column shall be filled out with a value or a range of value that are allowed for the item, according to the conditions. EXAMPLE: 500 ms 5 t 5 2 O00 ms. Support or Value column The support column sha

49、ll be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7, are used for the support column: Y or y N or n N/A, n/a or - supported by the implementation. not supported by the implementation. no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). the corresponding item was implemented with a value of 1 O00 ms. 1 O00 ms NOTE 2: As stated in ISO/IEC 9646-7, support for a received PDU requires the ability to parse all valid paramet