ETSI ES 200 812-1-2003 Terrestrial Trunked Radio (TETRA) Subscriber Identity Module to Mobile Equipment (TSIM-ME) interface Part 1 Universal Integrated Circuit Card (UICC) Physical.pdf

1、 ETSI ES 200 812-1 V2.2.5 (2003-12)ETSI Standard Terrestrial Trunked Radio (TETRA);Subscriber Identity Module toMobile Equipment (TSIM-ME) interface;Part 1: Universal Integrated Circuit Card (UICC);Physical and logical characteristicsETSI ETSI ES 200 812-1 V2.2.5 (2003-12) 2 Reference RES/TETRA-0312

2、7 Keywords card, radio, security, SIM, TETRA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice In

3、dividual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Docu

4、ment Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the

5、current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and t

6、he foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being regis

7、tered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI ES 200 812-1 V2.2.5 (2003-12) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 4 1 Scope 5 2 References 5 3 Defini

8、tions, symbols, abbreviations and coding.5 3.1 Definitions5 3.2 Symbols5 3.3 Abbreviations .5 3.4 Coding 6 4 Physical and logical characteristics6 Annex A (informative): Change Requests7 History 8 ETSI ETSI ES 200 812-1 V2.2.5 (2003-12) 4 Intellectual Property Rights IPRs essential or potentially es

9、sential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs not

10、ified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee c

11、an be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Project Terrestrial Trunked Radio (TETRA). The pr

12、esent document is part 1 of a multi-part deliverable covering the Subscriber Identity Module to Mobile Equipment (TSIM-ME) interface, as identified below: ES 200 812-1: “Universal Integrated Circuit Card (UICC); Physical and logical characteristics“; ES 200 812-2: “Universal Integrated Circuit Card

13、(UICC); Characteristics of the TSIM application“; EN 300 812-3: “Integrated Circuit (IC); Physical, logical and TSIM application characteristics“. NOTE: Part 3 was originally published as EN 300 812 and defines different technology than part 1 and part 2. Introduction The present document defines a

14、generic terminal/Integrated Circuit Card (ICC) interface. The present document is independent of the TETRA application and can thus be the platform for any IC card application. The aim of the present document is to ensure interoperability between an ICC and a terminal independently of the respective

15、 manufacturer, card issuer or operator. The present document does not define any aspects related to the administrative management phase of the ICC. Any internal technical realization of either the ICC or the terminal is only specified where these are reflected over the interface. Application specifi

16、c details for applications residing on an ICC are specified in the respective application specific documents. ETSI ETSI ES 200 812-1 V2.2.5 (2003-12) 5 1 Scope The present document specifies the interface between the UICC and the terminal. The present document specifies: the requirements for the phy

17、sical characteristics of the UICC; the electrical interface between the UICC and the terminal; the initial communication establishment and the transport protocols; the model which serves as a basis for the logical structure of the UICC; the communication commands and the procedures; the application

18、independent files and protocols. The administrative procedures and initial card management are not part of the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specifi

19、c (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected loca

20、tion might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 102 221: “Smart cards; UICC-Terminal interface; Physical and logical characteristics (Release 5)“. 2 ETSI TS 100 812-2: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (SIM-ME) interface; Part 2: Uni

21、versal Integrated Circuit Card (UICC); Characteristics of the TSIM application“. 3 Definitions, symbols, abbreviations and coding 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 102 221 1 apply. 3.2 Symbols For the purposes of the present document, the

22、 symbols defined in TS 102 221 1 apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations defined in TS 102 221 1 apply. ETSI ETSI ES 200 812-1 V2.2.5 (2003-12) 6 3.4 Coding For the purposes of the present document, the coding defined in TS 102 221 1 applies. 4 Physical a

23、nd logical characteristics The UICC/terminal interface shall comply with all requirements stated in TS 102 221 1. Where options are indicated in TS 102 221 1, TS 100 812-2 2 specifies which option shall be used for a UICC/terminal interface where the UICC supports a TSIM. ETSI ETSI ES 200 812-1 V2.2

24、.5 (2003-12) 7 Annex A (informative): Change Requests The present document contains Change Requests as described in table A.1. Table A.1: Change Requests CR No CR vers Version TS ES Clauses affected Title Source CR Status 001 10 V2.2.2 X X 4 Essential Correction on TETRA TSIM application Schlumberge

25、r EPT approved 030618 ETSI ETSI ES 200 812-1 V2.2.5 (2003-12) 8 History Document history V2.2.1 April 2002 Publication as TS 100 812-1 V2.2.2 September 2002 Publication V2.2.5 October 2003 Publication as TS 100 812-1 V2.2.5 October 2003 Membership Approval Procedure MV 20031212: 2003-10-14 to 2003-12-12 V2.2.5 December 2003 Publication