ETSI ES 202 060-2-2003 Short Message Service (SMS) for fixed networks Network Based Solution (NBS) Part 2 Architecture and functional entities《固定网络的短消息业务(SMS) 基于网络的解决方案(NBS) 第2部分 体_1.pdf

1、ETSI ES 202 060-2 1.1.1 (2003-05) ETSI Standard Short Message Service (SMS) for fixed networks; Network Based Solution (NBS); Part 2: Architecture and functional entities 2 ETSI ES 202 060-2 VI .I .I (2003-05) Reference DES/SPAN-I30311-2 Keywords architecture, ISDN, DSSI, SMS, functional, protocol E

2、TSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can

3、be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the

4、reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI docum

5、ents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproductio

6、n in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.

7、 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI ES 202 060-2 VI . 1 . 1 (2003-05) Contents Intellectual Property Rights 4 Foreword . 4 Introduction 4 1 2 3 3.1 3.2 4 5 5.1 5.1.1 5.1.2 5.1.3 5.1.4 Scope 5 References 5 Defi

8、nitions and abbreviations . 6 Definitions . 6 Abbreviations . . 7 Overall Description 8 Basic Operational SMS scenarios 9 SMS interconnection scenarios between network elements . 9 PSTN . intra PSTN . inter PSTN/ISDN . PLMN PLMN . PSTN/ISDN 10 11 12 12 6 Network based SMS functional architecture 13

9、6.1 Functional model . 13 6.2 Rp . 1 (ISDN customer reference point) 13 6.3 Rp.2 (Analogue customer reference PO 6.4 6.5 Subscriber Profile . 7 8 8.1 Exchange of SM between SM-SC . . 8.2 8.2.1 First possibility . Rp.3 (OLE to ISDN SMS functional entity reference point) . NBS network reference config

10、uration 14 SMS network scenarios 15 SMs from a sending user to a SM . . 8.2.2 Second possibility . History 19 Annex A (informative): Bibliography . 17 ETSI 4 ETSI ES 202 060-2 VI .I .I (2003-05) Intellectual Property Rights IPRs essential or potentially essential to the present document may have bee

11、n declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, w

12、hich is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee

13、Services and Protocols for Advanced Networks (SPAN). The present document is part 2 of a multi-part standard covering the Short Message Services (SMS) for fixed networks; Networks Based Solution (NBS), as described below: Part 1 : “Overview“; Part 2: “Architecture and functional entities“; Part 3 :

14、Part 4: “Integrated Services Digital Network (ISDN) access protocol“; “Interworking between Signalling System N0.7 (SS7) and Digital Subscriber Signalling System No. one (DSSl)“; Part 5: “Network access protocol“. NOTE: The choice of a multi-part format for this deliverable is to facilitate maintena

15、nce and future enhancements. In accordance with ITU-T Recommendation I. 130 4, the following three level structure is used to describe the supplementary telecommunication services as provided by European public telecommunications operators under the pan-European ISDN: - - Stage 1 is an overall servi

16、ce description, from the users standpoint; Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1; and Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 1. - The

17、present document details the stage 2 aspects (functional capabilities) needed to support the SM service. The stage 1 aspects are detailed in ES 201 986 SI. The stage 3 aspects of the SM service have been specified in ES 202 060-1 i i. The present version updates the references to the basic call spec

18、ifications. I n t rod uct ion The Short Message Service is a service, applicable at the coincident S and T reference point and T reference point, to provide the served user the ability to send and receive Short Messages. The Short Messages are exchanged between the sending and receiving user via a S

19、hort Message Service Centre (SM-SC). ETSI 5 ETSI ES 202 060-2 VI .I .I (2003-05) 1 Scope The present document specifies the functional architecture of the Short Message Service (SM) service for the pan-European Integrated Services Digital Network (ISDN) as provided by European public telecommunicati

20、ons operators at the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation 1.41 1 6) by means of the Digital Subscriber Signalling SystemNo. one (DSS1) protocol. The Functional Architecture as defiied in Stage two needed to support a telecommunication service (s

21、ee ITU-T Recommendation I. 130 4). The present document does not speciSl the additional functional entities or architecture where the service is provided to the user via a telecommunication network that is not an ISDN but it does include intenvorking requirements of other networks with the public IS

22、DN. The Short Message Service is provided independently of a call. Charging principles are outside the scope of the present document. The Short Message Service enables the originating SMS user to send Short Messages (SMs) to the receiving SMS user via a Short Message Service Centre, belonging to the

23、 network of the SMS originating user (served user) or separated from the network of the SMS originating user. NOTE: The Short Message Service is typically used between a Short Message service provider and a user (receiving user) of the Short Message service provided. Further parts of the present doc

24、ument speciSl the method of testing required to identiSl conformance to the present document. The present document is applicable to equipment supporting the Short Message Service, to be attached at either side of a T reference point or coincident S and T reference point when used as an access to the

25、 public ISDN. 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific ref

26、erence, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at htlu:/docbox.etsi.or:eerence. il ETSI EN 300 196-1: “Integrated Services Digital Network (

27、ISDN); Generic functional protocol for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1 : Protocol specification“. ITU-T Recommendation E. 164: “The international public telecommunication numbering plan“. ITU-T Recommendation I. 112: “Vocab

28、ulary of terms for ISDNs“. ITU-T Recommendation I. 130 (1988): “Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN“. ITU-T Recommendation 1.2 10: “Principles of telecommunication services supported by an ISDN and the means to descri

29、be them“. 21 31 41 51 61 71 ITU-T Recommendation 1.41 1 (1 993): “ISDN user-network interfaces - Reference configurations“. ITU-T Recommendation Q.9 (1988): “Vocabulary of switching and signalling terms“ ETSI 6 ETSI ES 202 060-2 VI .I .I (2003-05) SI ETSI ES 201 986 (V1.1.2): “Services and Protocols

30、 for Advanced Networks (SPAN); Short Message Service (SMS) for PSTNASDN; Service description“. ETSI ES 202 060-3 (Vi. 1.1): “Short Message Service (SMS) for fixed networks; Network Based Solution (NBS); Part 3 : Integrated Services Digital Network (ISDN) access protocol“. ETSI ES 202 060-5 (Vi. 1.1)

31、: “Short Message Service (SMS) for fixed networks; Network Based Solution (NBS); Part 5: Network access protocol“. ETSI ES 202 060-1: “Short Message Service (SMS) for fixed networks; Network Based Solution (NBS); Part 1 : Overview“. 91 lo1 111 3 3.1 Definitions and abbreviations De fi nit ions For t

32、he purposes of the present document, the following terms and definitions apply: basic access: See ITU-T Recommendation Q.9 7. basic call procedures: procedures by which a call (as an instance of a telecommunications service) is established and terminated delivery report: response from the destinatio

33、n terminal to the SM-SC indicating that an SM has been accepted or not with the appropriate cause, if rejected Integrated Services Digital Network (ISDN): See ITU-T Recommendation I. 112 3. invoke component: where reference is made to a “xxxx“ invoke component, an invoke component is meant with its

34、operation value set to the value of the operation “xxxx“ NOTE: See EN300 196-1 i, clause 8.2.2.1. ISDN number: number conforming to the numbering plan and structure NOTE: Specified in ITU-T Recommendation E.164 2. network DSSl protocol entity at the network side of the user-network interface origina

35、ting SMS user: user that originates and sends the SM primary rate access: See ITU-T Recommendation Q.9 7. private network DSSl protocol entity at the user side of the user-network interface at the T reference point public network DSSl protocol entity at the network side of the user-network interface

36、 at the T reference point receiving SMS user: user that receives the Short Message and who may also deactivate the reception of SMs and reactivate the reception later on receiving user number: ISDN number of the user, that receives the Short Message reject component: See EN 300 196-1 i, clause 8.2.2

37、.4. reply path procedure: mechanism which allows an SM-TE to request that an SM-SC should be permitted to handle a reply sent in response to a message previously sent from that SM-TE to another SM-TE NOTE: This may happen even though the SM-SC may be unknown to the SM-TE which received the initial m

38、essage. return error component: where reference is made to a “xxxx“ return error component, a return error component is meant which is related to a “xxxx“ invoke component NOTE: See EN 300 196-1 i, clause 8.2.2.3. ETSI 7 ETSI ES 202 060-2 VI .I .I (2003-05) return result component: where reference i

39、s made to a “xxxx“ return result component, a return result component is meant which is related to a “xxxx“ invoke component NOTE: See EN 300 196-1 i, clause 8.2.2.2. served user number: ISDN number of the user who subscribes to, activates, deactivates or interrogates the Short Message services serv

40、ice/telecommunication service: See ITU-T Recommendation I. 112 3. Service Centre Time Stamp (SCTS): information element offering the receiving SM-TE of an SM the information of when the message arrived at the SM-SC Short Message (SM): information, that may be conveyed by means of the SMS described i

41、n the present document Short Message Service Centre (SM-SC): function unit, which is responsible for the relaying and store-and-forwarding of a short message (SM) between two SM-TE NOTE: The SM-SC can functionally be separated from or integrated in the network. Short Message Service Centre Number (S

42、M-SCNr): ISDN number of the Short Message Service Centre Short Message Terminal (SM-TE): terminal which may send or receive short messages. status report: information used to inform the originating SM-TE of the status of a short message previously submitted by this SM-TE EXAMPLE: Whether the SM-SC w

43、as able to successfully forward the message or not, or whether the message was stored in the SM-SC for later delivery. submit report: response from the SM-SC to the originating terminal indicating that an SM has been accepted or not with the appropriate cause, if rejected supplementary service: See

44、ITU-T Recommendation 1.210 5. user: DSSl protocol entity at the user side of the user-network interface Validity Period VP): information element enabling the sending SM-TE to indicate the time period during which the originating user considers the SM to be valid 3.2 Abbreviations For the purposes of

45、 the present document, the following abbreviations apply: ANLG ASE ASN. 1 DLE DSSl GW HLR ISDN IW LE MF MSC MTP NBS OLE PLMN PSTN SCCP SDL SM ANouncement LanGuage Application Service Element Abstract Syntax Notation One Destination Local Exchange Digital Subscriber Signalling System No. One Gateway

46、Home Location Register Integrated Services Digital Network Interworking Local Exchange Multi Frequency Mobile Switching Centre Message Transfer Part Network Based Solution (bearer unrelated) for the SMS Origination Local Exchange Public Land Mobile Network Public Switched Telephone Networks Signalli

47、ng Connection Control Part Specification and Description Language Short Message ETSI 8 ETSI ES 202 060-2 VI .I .I (2003-05) SM-ASE SM-SCNr SMPP SMS SM-SC SM-TE STP TCAP TCP/IP TE TN UCP USB VLR Short Message-Application Service Element Short Message Service Centre Number Short Message Peer to Peer S

48、hort Message Service Short Message Service Centre Short Message TErminal Signalling Transfert Part Transaction CAPabilities Transmission Control ProtocoVInternet Protocol Terminal Equipment Transit Node Unified Computer Protocol User Based Solution (bearer related) for the SMS Visitor Location Regis

49、ter 4 Overall Description The Short Message Service (SMS) service shall be available to users who are connected to the network via a basic access or primary rate access. The Short Message Service (SMS) enables an originating user to send a SM of a limited size to a destination user. A short message can be initiated upon a request of the sending user or by the service provider itself, and shall be sent to the receiving user. An SM is always conveyed via an SM-SC. The SM-SC receives the SM from an originating SM-TE (sending user), converts t