ETSI ES 202 336-2-2009 Environmental Engineering (EE) Monitoring and control interface for infrastructure equipment (Power Cooling and environment systems used in telecommunication.pdf

1、 ETSI ES 202 336-2 V1.1.1 (2009-03)ETSI Standard Environmental Engineering (EE);Monitoring and control interface forinfrastructure equipment (Power, Cooling andenvironment systems used in telecommunication networks);Part 2: DC power system control andmonitoring information modelETSI ETSI ES 202 336-

2、2 V1.1.1 (2009-03)2Reference DES/EE-02037-2 Keywords control, interface, management, power, system ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-

3、Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between suc

4、h versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subjec

5、t to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_

6、support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM,

7、the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members

8、 and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)3Contents Intellectual Property Rights 5g3Foreword . 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative referenc

9、es 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 9g34 DC power supply system 10g3Annex A (normative): Summary of mandatory monitoring/supervision information and functions 12g3A.1 DC POWER SUPPLY SYSTEMS . 12g3A.1.1 Table for DC power supply system without back-up .

10、12g3A.1.2 Table for DC power supply system with back-up 13g3Annex B (informative): Summary of non-mandatory monitoring/supervision information and functions 15g3B.1 DC power supply system without back-up . 15g3B.2 DC power supply system with back-up 16g3B.3 DC power supply rectifier 17g3Annex C (nor

11、mative): Mandatory XML structure and elements 18g3C.1 Structure of an XML document for a DC power supply system 18g3C.2 The specific XML elements of a DC power supply system . 19g3Annex D (informative): Examples of XML elements for a DC power supply system 20g3D.1 The elements of a DC power supply s

12、ystem . 20g3D.2 The elements of a DC power supply system 21g3D.3 The elements of a DC power supply system 21g3D.4 The elements of a DC power supply system 22g3D.5 The elements of a DC power supply system 22g3D.6 The elements of a DC power supply system. 22g3D.7 The elements of a DC power supply syst

13、em . 23g3D.8 The elements of a DC power supply rectifier . 23g3D.9 The elements of a DC power supply rectifier 23g3D.10 The elements of a DC power supply rectifier. 23g3D.11 The elements of a DC power supply rectifier. 23g3D.12 The elements of a DC power supply rectifier . 24g3D.13 The elements of a

14、 DC power supply rectifier 24g3ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)4Annex E (informative): Bibliography . 25g3History 26g3ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)5Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The inform

15、ation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the E

16、TSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 00

17、0 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE). The present document is part 2 of a multi-part deliverable covering Mon

18、itoring and control interface for infrastructure equipment (Power, Cooling and environment systems used in telecommunication networks), as identified below: Part 1: “Generic Interface“; Part 2: “DC power system control and monitoring information model“; Part 3: “AC UPS power system control and monit

19、oring information model“; Part 4: “AC distribution power system control and monitoring information model“; Part 5: “AC diesel back-up generator system control and monitoring information model“; Part 6: “Air conditioning system control and monitoring information model“; Part 7: “Other utilities syste

20、m control and monitoring information model“. ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)61 Scope The present document applies to monitoring and control of DC power supply systems for telecommunication equipment. The present document defines: The monitored and controlled DC power supply system architectu

21、res. The minimum set of exchanged information required at the interface, described in “natural language“ in text tables. The XML files with tags and variables corresponding to the data in the tables. 2 References References are either specific (identified by date of publication and/or edition number

22、 or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced

23、 document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time

24、of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the refer

25、enced document (including any amendments) applies. 1 ETSI ES 202 336-1: “Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 1: Generic Interface“. 2 ETSI EN 300 132-2

26、: “Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc)“. 3 ETSI EN 300 132-3: “Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 3: Operated by rectified c

27、urrent source, alternating current source or direct current source up to 400 V“. 4 ETSI EN 302 099: “Environmental Engineering (EE); Powering of equipment in access network“. ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)72.2 Informative references The following referenced documents are not essential to th

28、e use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 IEEE 802.1 to 11: “IEEE Standard for Local and Metropolitan Area Networks: Overview and

29、Architecture“. i.2 ISO/IEC 10164 (all parts): “Information technology - Open Systems Interconnection“. i.3 ISO/IEC 8879:“Information processing - Text and office systems - Standard Generalized Markup Language (SGML)“. i.4 IEC 60896 (all parts): “Stationary lead-acid batteries“. 3 Definitions and abb

30、reviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: NOTE: Terms referring to energy interface, equipment and distribution are described in power distribution standards EN 300 132-2 2, EN 300 132-3 3 for ac and dc interface and EN 302 099 4

31、for access network equipment powering. alarm: any information signalling abnormal state, i.e. different to specified normal state of hardware, software, environment condition (temperature, humidity, etc.) NOTE: The alarm signal should be understood by itself by an operator and should always have at

32、least one severity qualification or codification (colour, level, etc.). Example: rectifier failure, battery low voltage, etc.). alarm loop: electrical loop which open or closed state correspond to alarm start (set) or end (clear) state alarm message: text parts of the alarm structure alarm structure

33、: organized set of information fields in an alarm data frame (time stamp, set/clear, text, etc.) battery: complete arrangement of battery cells or blocks in one string or more in parallel battery block: battery cell (e.g. 2 V for lead-acid) connected and placed in the same container (forming 4 V, 6

34、V or 12 V blocks) battery cell: basic electrochemical element (e.g. a 2 Vnominal cell for a high capacity lead acid battery) battery string: number of serially interconnected battery blocks or cells client post: any device (laptop, PDA, console, etc.) connected to servers via the operation system ne

35、tworks to perform maintenance or supervision operations Control Unit (CU): integrated unit in an equipment to monitor and control this equipment through sensors and actuators Control form Style Sheet (CSS): simple mechanism for adding style (e.g. fonts, colours, spacing) to Web documents. Tutorials,

36、 books, mailing lists for users, etc. ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)8Data Gathering Unit (DGU): functional unit used for several functions: collect serial, digital, and analog data from several equipment; option to send (output) serial or digital commands; forward/receive information to/fro

37、m the Local/Remote Management Application via agreed protocols; mediation between interfaces and protocols. NOTE: This function may be integrated as part of specific equipment. Dynamic Host Control Protocol (DHCP): protocol used for self configuration of TCP/IP parameters of a workstation assigning

38、IP address and a subnetwork mask NOTE: DHCP may also configure DNS. Dynamic Name Server (DNS): associates a single domain name to an IP address dynamic synoptic: dynamic display of geographical maps, networks, installations and equipment Ethernet: LAN protocol NOTE: Equivalent to IEEE 802.1 to 11 i.

39、1. event: any information signalling a change of state which is not an alarm: e.g. battery test, change of state of battery charge NOTE: The event signal should be understood by itself by an operator and should always have at least one severity qualification or codification (colour, level, etc.). It

40、 should be transmitted in a formatted structure with text message and other fields like for alarm, e.g. an event can be coded as an alarm with severity “0“. infrastructure equipment: power, cooling and building environment systems used in telecommunications centres and Access Networks locations EXAM

41、PLE: Cabinets, shelters, underground locations, etc. intranet: internal company network generally using Ethernet protocol and extended IP addresses logbook: chronological file that contains alarm and event messages may be paper or electronic Management Information Base (MIB): dynamic data base that

42、gathers all objects and should evolve to include automatic and manual configuration tools with self coherence tests menu: list of possible input command choices that may be presented in different ways on a display NOTE: Selection is normally made by a keyboard, a pointing device, a mouse or directly

43、 by finger on a sensitive screen. object: class description of items that accept a set of properties or functions NOTE: Generic objects can include more specific items and inherit from their properties. If correctly structured, object programming can allow the system to evolve, i.e. be more future-p

44、roof. The code should intrinsically be open and structured. PHP: powerful tool for making dynamic and interactive Web pages pop-up: information or command screen that appears when a menu choice is selected NOTE: For example this may be a pop-up menu when the pointer is on a title button. REpresentat

45、ional State Transfer (REST): way to build an application for distributed system as www ETSI ETSI ES 202 336-2 V1.1.1 (2009-03)9Simple Object Access Protocol (SOAP): way to communicate between applications running on different operating systems, with different technologies and programming languages N

46、OTE: SOAP communicates over HTTP, because HTTP is supported by all Internet browsers and servers, SOAP traffic is not blocked by firewalls and proxy servers (see W3C). Systems Management Function (SMF): object properties or classes with projection on CMIS application context communication NOTE: Set

47、of ISO system management functions according to ISO/IEC 10164 i.2. warning: low severity alarm World Wide Web Consortium (W3C): consortium founded in October 1994 to develop common interoperable protocols and promote World Wide Web NOTE: See http:/www.w3c.org. Windows: virtual area on the display th

48、at corresponds to a specific application web: common name for the Internet or Intranet XCU: CU enabled to communicate using XML interface as defined in the present document XHTML: stricter and cleaner version of HTML. XHTML consists of all the elements in HTML 4.01 combined with the syntax of XML. I

49、t can be read by all XML browser (see W3C) eXtensible Mark-up Language (XML): application profile or restricted form of SGML NOTE: By construction, XML documents are conforming SGML the Standard Generalized Markup Language (ISO/IEC 8879 i.3). documents.XML is designed to describe data and focus on what data is. XML should be discerned from the well known Hypertext Transfer Mark-up Language (HTML) which was designed to display data and to focus on how data looks. XML Schema Definition (XSD): new more detailed XML description compa