1、 ETSI ES 204 915-7 V1.1.1 (2008-05)ETSI Standard Open Service Access (OSA);Application Programming Interface (API);Part 7: Terminal Capabilities SCF(Parlay 6)floppy3 ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 2 Reference DES/TISPAN-01032-7-OSA Keywords API, IDL, OSA, UML ETSI 650 Route des Lucioles F-0
2、6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.et
3、si.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing o
4、n ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal
5、.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the for
6、egoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. The Parlay Group 2008. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM
7、 is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 3 Contents Intellectual Property Rights5 Foreword.5 1 Scope 6 2 References 6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .6 4 T
8、erminal Capabilities SCF .6 4.1 General requirements on support of methods.7 5 Sequence Diagrams 7 5.1 Terminal capabilities example7 6 Class Diagrams.9 7 The Service Interface Specifications10 7.1 Interface Specification Format .10 7.1.1 Interface Class 10 7.1.2 Method descriptions10 7.1.3 Paramete
9、r descriptions10 7.1.4 State Model.10 7.2 Base Interface.10 7.2.1 Interface Class IpInterface 10 7.3 Service Interfaces .11 7.3.1 Overview 11 7.4 Generic Service Interface .11 7.4.1 Interface Class IpService 11 7.4.1.1 Method setCallback()11 7.4.1.2 Method setCallbackWithSessionID()11 8 Terminal Cap
10、abilities Interface Classes .12 8.1 Interface Class IpTerminalCapabilities 12 8.1.1 Method getTerminalCapabilities()12 8.2 Interface Class IpExtendedTerminalCapabilities .13 8.2.1 Method triggeredTerminalCapabilityStartReq().13 8.2.2 Method triggeredTerminalCapabilityStop() .14 8.3 Interface Class I
11、pAppExtendedTerminalCapabilities 14 8.3.1 Method triggeredTerminalCapabilityReport()15 8.3.2 Method triggeredTerminalCapabilityReportErr().15 9 State Transition Diagrams16 10 Service Properties.16 11 Terminal Capabilities Data Definitions16 11.1 terminalIdentity 16 11.2 TpTerminalCapabilities16 11.3
12、 TpTerminalCapabilitiesError .17 11.4 TpTerminalCapabilityChangeCriteria17 11.5 TpTerminalCapabilityScopeType 17 11.6 TpTerminalCapabilityScope.17 12 Exception Classes.18 Annex A (normative): OMG IDL Description of Terminal Capabilities SCF .19 Annex B (informative): W3C WSDL Description of Terminal
13、 Capabilities SCF20 ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 4 Annex C (informative): Java API Description of the Terminal Capabilities SCF .21 Annex D (informative): Contents of 3GPP OSA R7 Terminal Capabilities .22 Annex E (informative): Description of Terminal Capabilities SCF for 3GPP2 cdma2000 n
14、etworks23 E.1 General Exceptions.23 E.2 Specific Exceptions23 E.2.1 Clause 1: Scope 23 E.2.2 Clause 2: References 23 E.2.3 Clause 3: Definitions and abbreviations.23 E.2.4 Clause 4: Terminal Capabilities SCF .23 E.2.5 Clause 5: Sequence Diagrams 23 E.2.6 Clause 6: Class Diagrams.23 E.2.7 Clause 7: T
15、he Service Interface Specifications 23 E.2.8 Clause 8: Terminal Capabilities Interface Classes .24 E.2.9 Clause 9: State Transition Diagrams 24 E.2.10 Clause 10: Service Properties.24 E.2.11 Clause 11: Terminal Capabilities Data Definitions 24 E.2.12 Clause 12: Exception Classes.24 E.2.13 Annex A (n
16、ormative): OMG IDL Description of Terminal Capabilities SCF .24 E.2.14 Annex B (informative): W3C WSDL Description of Terminal Capabilities SCF .24 E.2.15 Annex C (informative): Java API Description of Terminal Capabilities SCF24 Annex F (informative): Record of changes 25 F.1 Interfaces 25 F.1.1 Ne
17、w 25 F.1.2 Deprecated25 F.1.3 Removed.25 F.2 Methods25 F.2.1 New 25 F.2.2 Deprecated25 F.2.3 Modified.26 F.2.4 Removed.26 F.3 Data Definitions .26 F.3.1 New 26 F.3.2 Modified.26 F.3.3 Removed.26 F.4 Service Properties.26 F.4.1 New 26 F.4.2 Deprecated27 F.4.3 Modified.27 F.4.4 Removed.27 F.5 Exceptio
18、ns 27 F.5.1 New 27 F.5.2 Modified.27 F.5.3 Removed.27 F.6 Others .27 History 28 ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, i
19、f any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are availab
20、le on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web serve
21、r) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 7 of a multi-part
22、deliverable covering Open Service Access (OSA); Application Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following parts: Part 1: “Overview“; Part 2: “Common Data Definitions“; Part 3: “Framework“; Part 4: “Call Control“; Part 5: “User Int
23、eraction SCF“; Part 6: “Mobility SCF“; Part 7: “Terminal Capabilities SCF“; Part 8: “Data Session Control SCF“; Part 9: “Generic Messaging SCF“; Part 10: “Connectivity Manager SCF“; Part 11: “Account Management SCF“; Part 12: “Charging SCF“; Part 13: “Policy Management SCF“; Part 14: “Presence and A
24、vailability Management SCF“; Part 15: “Multi-Media Messaging SCF“ Part 16: “Service Broker SCF“. The present document has been defined jointly between ETSI, The Parlay Group (http:/www.parlay.org) and the 3GPP, in co-operation with a number of JAIN Community (http:/ member companies. The present doc
25、ument forms part of the Parlay 6.0 set of specifications. The present document is equivalent to 3GPP TS 29.198-7 V7.0.0 (Release 7). ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 6 1 Scope The present document is part 7 of the Stage 3 specification for an Application Programming Interface (API) for Open S
26、ervice Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardised interface, i.e. the OSA APIs. The present document specifies the Terminal Capabilities Service Capability Feature (SCF) aspects of
27、the interface. All aspects of the Terminal Capabilities SCF are defined here, these being: Sequence Diagrams. Class Diagrams. Interface specification plus detailed method descriptions. State Transition diagrams. Data Definitions. IDL Description of the interfaces. WSDL Description of the interfaces.
28、 The process by which this task is accomplished is through the use of object modelling techniques described by the Unified Modelling Language (UML). 2 References The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute provisions of the p
29、resent document. ETSI ES 204 915-1: “Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview (Parlay 6)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply. 3.2 Abbreviations Fo
30、r the purposes of the present document, the abbreviations given in ES 204 915-1 apply. 4 Terminal Capabilities SCF The following clauses describe each aspect of the Terminal Capabilities Capability Feature (SCF). The order is as follows: The Sequence diagrams give the reader a practical idea of how
31、each of the SCF is implemented. The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another. ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 7 The Interface specification clause describes in detail each of the interfaces shown within the Class diagram part. T
32、he State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions are well-defined; either methods specified in the Interface specification or events occurring in the underlying networks cause state transitions. The Data Definitions clause shows a detailed
33、expansion of each of the data types associated with the methods within the classes. Note that some data types are used in other methods and classes and are therefore defined within the Common Data types part ES 204 915-2. 4.1 General requirements on support of methods An implementation of this API w
34、hich supports or implements a method described in the present document, shall support or implement the functionality described for that method, for at least one valid set of values for the parameters of that method. Where a method is not supported by an implementation of a Service interface, the exc
35、eption P_METHOD_NOT_SUPPORTED shall be returned to any call of that method. Where a method is not supported by an implementation of an Application interface, a call to that method shall be possible, and no exception shall be returned. 5 Sequence Diagrams 5.1 Terminal capabilities example The followi
36、ng example sequence diagram illustrates how the terminal capabilities can be retrieved and their changes monitored. ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 8 Application : IpAppExtendedTerminalCapabilities: IpTerminalCapabilities: IpExtendedTerminalCapabilities1: getTerminalCapability( )2: new( )3:
37、triggeredTerminalCapabilityStartReq( )4: triggeredTerminalCapabilityReport( )6: triggeredTerminalCapabilityReport( )5: forward notification7: forward notification8: triggeredTerminalCapabilityReportErr( )9: forward error10: triggeredTerminalCapabilityReport( )11: forward notification12: triggeredTer
38、minalCapabilityStop( )1: The application retrieves the terminal capability of a terminal. 2: The application creates an object to implement IpAppExtendedTerminalCapabilities. 3: The terminal capabilities changes are started to be monitored. 4: The terminal capabilities have changed and they are repo
39、rted as requested. 5: The report is forwarded internally to the application. 6: The terminal capabilities have changed and they are reported as requested. 7: The report is forwarded internally to the application. 8: An error has happened in the monitoring and it is reported. 9: The error report is f
40、orwarded internally to the application. 10: The terminal capabilities have changed and they are reported as requested. 11: The report is forwarded internally to the application. 12: The terminal capability monitoring is stopped. ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 9 6 Class Diagrams Terminal Cap
41、abilities Class Diagram: IpTerminalCapabilitiesgetTerminalCapabilities()(f ro m te rm c a p )IpServicesetCallback()setCallbackWithSessionID()(f rom csapi )IpExtendedTerminalCapabilitiestriggeredTerminalCapabilityStartReq()triggeredTerminalCapabilityStop()(f ro m te rm c a p )IpAppExtendedTerminalCap
42、abilitiestriggeredTerminalCapabilityReport()triggeredTerminalCapabilityReportErr()(f ro m te rm c a p )IpInterface(f rom csapi )Figure 1: Terminal Capabilities Class Diagram ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 107 The Service Interface Specifications 7.1 Interface Specification Format This claus
43、e defines the interfaces, methods and parameters that form a part of the API specification. The Unified Modelling Language (UML) is used to specify the interface classes. The general format of an interface specification is described below. 7.1.1 Interface Class This shows a UML interface class descr
44、iption of the methods supported by that interface, and the relevant parameters and types. The Service and Framework interfaces for enterprise-based client applications are denoted by classes with name Ip. The callback interfaces to the applications are denoted by classes with name IpApp. For the int
45、erfaces between a Service and the Framework, the Service interfaces are typically denoted by classes with name IpSvc, while the Framework interfaces are denoted by classes with name IpFw. 7.1.2 Method descriptions Each method (API method “call”) is described. Both synchronous and asynchronous method
46、s are used in the API. Asynchronous methods are identified by a Req suffix for a method request, and, if applicable, are served by asynchronous methods identified by either a Res or Err suffix for method results and errors, respectively. To handle responses and reports, the application or service de
47、veloper must implement the relevant IpApp or IpSvc interfaces to provide the callback mechanism. 7.1.3 Parameter descriptions Each method parameter and its possible values are described. Parameters described as in represent those that must have a value when the method is called. Those described as o
48、ut are those that contain the return result of the method when the method returns. 7.1.4 State Model If relevant, a state model is shown to illustrate the states of the objects that implement the described interface. 7.2 Base Interface 7.2.1 Interface Class IpInterface All application, framework and
49、 service interfaces inherit from the following interface. This API Base Interface does not provide any additional methods. IpInterface ETSI ETSI ES 204 915-7 V1.1.1 (2008-05) 117.3 Service Interfaces 7.3.1 Overview The Service Interfaces provide the interfaces into the capabilities of the underlying network - such as call control, user interaction, messaging, mobility and connectivity management. The interfaces that are implemented by the services are denoted as Service Interface. The corresponding in
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1