ETSI ETR 294-1996 Radio Equipment and Systems (RES) Trans-European Trunked Radio (TETRA) Voice Plus Data (V + D) and Direct Mode Operation (DMO) Mobile Station (MS) Man Machine Int.pdf

1、3400855 0328427 b49 REPORT ETR 294 August 1996 Source: ETSI TC-RES Reference: DTR/RES-06021 ICs: 33.060, 33.060.50 Key words: TETRA, V+D, DMO, MMI Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Voice plus Data (V + D) and Direct Mode Operation (DMO); Mobile Station (MS) Man

2、 Machine Interface (MMI) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE X.400: c=fr, a=atlas, p=etsi, s=secretanat - Internet: secretariatetsi.

3、fr Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 1996. All rights reserved.

4、Page 2 ETSI ETRw294 Yb 3400855 0328428 585 ETR 294: August 1996 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Committee Su

5、pport Dept.“ at the address shown on the title page. ETSI ETR+294 96 m 3400855 0128427 411 Page 3 ETR 294: August 1996 Contents Foreword . 5 1 Scope 7 2 References 7 3 Definitions and abbreviations 7 3.1 Definitions 7 3.2 Abbreviations . 8 4 Physical interfaces 9 4.1 General 9 4.2 Keypad . 9 4.2.1 S

6、tandard keypad . 9 4.2.2 Enhanced keypad 10 4.3 Other keys 10 4.3.1 Push-To-Talk (PIT) key 10 4.3.2 Emergency key usage . 11 4.3.3 On/off key usage . 11 4.3.4 Volume key usage . 11 Visual and audible indications 11 4.4.1 Text display indications . 11 4.4.2 Icon indications 12 4.4.3 Audible indicatio

7、ns . 12 4.4 5 Control of teieservices and bearer services 13 6 Control of supplementary services 14 7 information after control actions 16 7.1 Activation and registration of a service 16 7.2 Deactivation without erasure 16 7.3 Invocation and disabling of a service . 16 History 17 ETSI ETRa294 76 H 3

8、400855 0328430 333 Page 4 ETR 294: August 1996 Blank page Page 5 ETR 294: August 1996 ETSI ETR*294 96 3400855 0128431 07T Foreword This ETSI Technical Report (ETR) has been produced by the Radio Equipment and Systems (RES) Technical Committee of the European Telecommunications Standards Institute (E

9、TSI). ETRs are informative documents resulting from ETSI studies which are not appropriate for European Telecommunication Standard (ETS) or Interim European Telecommunication Standard (LETS) status. An ETR may be used to publish material which is either of an informative nature, relating to the use

10、or application of ETSs or I-ETSs, or which is immature and not yet suitable for formal adoption as an ETS or LETS. ETSI ETR*294 96 = 3400855 0328432 Tb W Page 6 ETR 294: August 1996 Blank page ETSI 1 Scope This ETSI Technical ETR+294 9b 3400855 0228433 742 a Page 7 ETR 294: August 1996 Report (ETR)

11、defines the TETRA Man-Machine Interface (MMI) for the TETRA Mobile Station (MS) which can be a hand portable or mobile (vehicular mounted) station. The objective of this ETR is to describe the minimum MMI to gain access to, and control of, the TETRA bearer service and teleservice, and TETRA suppleme

12、ntary services, defined in ETS 300 392-2 l and ETS 300 396-3 2. Additionally it is the purpose of this ETR to aim for a common set of interfaces and interactions that will describe the essential parts of the MMI such that a certain degree of harmonized behaviour amongst the TETRA manufactures can be

13、 obtained. It is however not the purpose to mandate a specific implementation of an interface or interaction procedures but rather to establish the common behaviour exposed at the MMI interface and by the MMI interaction procedures. In general this ETR follows the rules and recommendations laid down

14、 by the ETSI Technical Committee for Human Factors (TC-HF) in their specifications referred to in the reference list (see clause 2). 2 References For the purposes of this ETR, the following references apply: i31 ETS 300 392-2: “Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA);

15、 Voice plus Data (V+D); Part 2: Air Interface (Al)“. ETS 300 396-3: “Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol“. ETS 300 640: “Human Fac

16、tors (HF); Assignment of alphabetic letters to digits on standard telephone keypad arrays“. prETS 300 738: “Human Factors (HF); Minimum man-machine interface (MMI) to public network based supplementary services“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of this ETR the follow

17、ing definitions apply: bearer service: A type of telecommunication service that provides the capability for the transmission of signals between user-network interfaces. duplex (full duplex): A mode of operation by which information can be transferred in both directions and where the two directions a

18、re independent. See also half duplex. gateway: A device which will enable the interconnecting of two networks which inherently use different and incompatible protocols. half duplex (semi duplex): A mode of operation by which information can be transferred in both directions but the transfers are mut

19、ually dependent (.e. up link and down link transfers share same resources). See also duplex. NOTE 1: In a packet switching environment (V+D signalling) protocols can be duplex at one layer and half duplex at another layer. incoming call: A terminating call which, from the viewpoint of an individual

20、party, is a call that was initiated by another party. ETSI ETR8294 96 9 3400855 0328434 889 Page 8 ETR 294: August 1996 NOTE 2: See also outgoing call. Mobile Radio Stack (MRS): Alogical grouping that includes all of the air interface protocol element in one MS (the mobile side of the air interface)

21、. Mobile Station (MS): A physical grouping that contains all of the mobile equipment that is used to obtain TETRA services. By definition, a mobile station contains at least one Mobile Radio Stack (MRS). outgoing call: A call which, from the viewpoint of an individual participant in the call, is ini

22、tiated by that participant. NOTE 3: See also incoming call. Push-To-Talk (PTT) key: The PTT key on the MMI is activated when the user wants to speak or send data. The PTT key controls the speech and data path in a simplex TETRA system or semi-duplex TETRA system and can be implemented as a manual sw

23、itch or a Voice Operated Switch (VOX). simplex: A mode of single or dual frequency working in which information can be transferred in both directions but not at the same time. supplementary service: A supplementary service modifies or supplements a bearer service or a teleservice. A supplementary se

24、rvice cannot be offered to a customer as a stand alone service. It should be offered in combination with a bearer service or a teleservice. Switching and Management Infrastructure (SwMI): All of the TETRA equipment for a Voice plus Data (V+D) network except for subscriber terminals. The SwMI enables

25、 subscriber terminals to communicate with each other via the SwMI. NOTE4: The SwMI may also make it possible for subscriber equipment to communicate via other transit networks to external applications. Mobile Stations (MS) can access the SwMI using the air interface. teleservice: A type of telecommu

26、nications service that provides the complete capability, including terminal equipment functions, for communication between users according to agreed protocols. 3.2 Abbreviations AP AS CAD CDF CMCE DGNA DL DMO DTM F ETS I GTSI ITS1 LE MM MS PC PPC PSTN PTT ss SwMI TETRA V+D vox Access Priority Area S

27、election Call Authorised by Dispatcher Command Dialogue Format Circuit Mode Control Entity Dynamic Group Number Assignment Discreet Listening Direct Mode Operation Dual Tone Multiple Frequency European Telecommunications Standards Institute Group TETRA Subscriber Identity Individual TETRA Subscriber

28、 Identity Late Entry Mobility Management Mobile Station Priority Call Pre-emptive Priority Call Public Switched Telephone Network Push To Talk Supplementary Service Switching and Management Infrastructure Trans-European Trunked RAdio Voice Plus Data Voice Operated Switch ETSI ETR+294 96 3400855 0328

29、435 735 * Page 9 -4 123 456 789 o # ETR 294: August 1996 4 Physical interfaces 4.1 General In order to facilitate human service interaction with the TETRA system a physical interface needs to be available. It is envisaged that a Mobile Station (MS) can be one of the access points from where a user c

30、an interact with the TETRA system. Therefore a MS should provide the necessary keys, buttons, visual and audible indication that support human service interaction. The following physical interfaces can be provided by a MS: - keypad for entering alphanumeric numbers signs or codes: - PTT key for cont

31、rolling the speech path; - emergency key for invoking a service with emergency priority: - on/off key for turning the MS on or off; - volume key(s) to lower or increase the volume in handsets, loudspeakers etc.: - visual indications to the user presented in form of icons, or LEDs, or in a display fo

32、r indications of responses to service invocations, or for indications of service requests to be served: - audible indications to the user presented in loudspeakers or hand sets for indications of responses to service invocations or for indications of service requests to be served. Other invocation k

33、eys or indications may exist to support other services and functions of the TETRA system. Also other functions and services than those described in this ETR can be supported by the keys, buttons, visible and audible indications described in this ETR. If the latter is the case every care should be ta

34、ken to maintain the original operational aspects of the keys, buttons, visible and audible indications so that a user is not confused or misled by the operation of the additional services. In the following each of the physical interfaces as outlined above is described further. It is important to not

35、ice that a so called “physical interface“ which supports invocation of a particular service does not necessarily have to be implemented in a certain way, e.g. an emergency key can be implemented as a separate key, as an entry in a displayed menu or as a voice activation. 4.2 Keypad As an option a MS

36、 can be equipped with a keypad. When a keypad is provided the layout should be implemented either as a standard keypad or as an enhanced keypad. 4.2.1 Standard keypad The following keypad in figure 1 is a 4 x 3 array for the numeric keys 09 and symbols “star“ (*) and “square“ (#). The keypad follows

37、 the standard telephone keypad array as specified in ETS 300 640 3. Figure 1 : Standard keypad for a TETRA MS ETSI ETR*zq4 96 3400855 OL2843b b5L = Page 10 ETR 294: August 1996 The keys 09, and # corresponds to the same digits 09, and # in the Circuit Mode Control Entity (CMCE) Dual Tone Multiple Fr

38、equency (DTMF) field of the TETRA V+D Air Interface standard (see ETS 300 392-2 l). 4.2.2 Enhanced keypad The keypad may be expanded to a 4 x 4 array covering enhanced radio or telecommunication functionality if applicable. The enhanced keys are “A“, “B“, “C“ and “D“ and the coupling with the standa

39、rd keypad is shown in figure 2. Figure 2: Expanded keypad for a TETRA MS The enhanced keys in the expanded keypad shown in figure 2 corresponds to the same digits “A“, “B“, “C“ and ID“ in the CMCE DTMF field of the TETRA V+D Air Interface protocol (see ETS 300 392-2 l). NOTE: The “Register Recall“ k

40、ey often used in connection with supplementary services can be one of enhanced keys, e.g. key “B“. 4.3 Other keys There may be other keys used at the air interface, however there should be no requirement to implement the keys described below and therefore the subclauses are provided for information

41、only. 4.3.1 Push-To-Talk (PlT) key The PTT key plays a significant role in the request-grant transmission process which is part of the basic operation in a TETRA V+D simplex or semi-duplex system. When PTT key is used it should at a minimum operate as follows: - when the PlT is pushed it means that

42、the speech direction is from the infrastructure (SwMI); when the PTT is released it means that the speech direction is to the MS, voice. - MS to the TETRA .e. the MS receives There can exist additional functionality connected to the PlT key, e.g. control of data messages, but that should not affect

43、the normal operation of the PTT. NOTE: The implementation of the PTT key is not restricted to a physical push button. It is envisaged that other implementations, e.g. VOX (Voice Operated Switch), is a possibility as long as the PTT functionality for the user is the same. ETSI ETRr294 96 3400855 0328

44、437 598 111 Page 11 ETR 294: August 1996 4.3.2 Emergency key usage An emergency key can exist as a separate key, as menu driven function or as a separate accessory outside the MS. Whatever the implementation is, the invocation of an emergency situation using the emergency key should lead to mapping

45、of the emergency priority onto the TETRA Air Interface signalling. For example one or more of the following cases are possible: - - activating the emergency key invokes Short Data Service (SDS) precoded emergency message; activating the emergency key invokes a TETRA teleservice, e.g. a group call or

46、 individual call, with emergency priority connected to the service request; - activating the emergency key invokes a TETRA bearer service, e.g. a data call, with emergency priority connected to the service request. 4.3.3 Onioff key usage An on/off key may be present in a MS. The on/off key can be im

47、plemented e.g. as an integrated part of a vehicular installation, as a separate key or keys or as soft-keys. Whatever the implementation is the behaviour of the on/off key should be as follows: - when a MS is in a power off state, the activation of the on/off key should power the MS up. At power up

48、the MS may apply for service from the TETRA infrastructure (SwMI) according to the TETRA V+D standard (see ETS 300 392-2 l); - when a MS is in a power on state, the activation of the onoff key should force the MS to power off while at the same time detach its services from the TETRA infrastructure (

49、SwMI). NOTE: Applying for service at power up is not necessarily bound to the on/off key. There could exist other functionality in connection with the activation of the on/off key, e.g. choosing network, choosing mode such as trunk mode or direct mode. 4.3.4 Volume key usage The volume key or volume keys may be present in an implementation as e.g. a rotary switch, an up/down key or as part of a menu driven functionality. Whatever the implementation is it should be unambiguous to the user how the operation works, e.g. if the volume is indicated by numbers either on the displ