ETSI GS CCM 001-2017 Compound Content Management Specification (V1 1 1)《复合内容管理规范(V1 1 1)》.pdf

1、 ETSI GS CCM 001 V1.1.1 (2017-02) Compound Content Management Specification Disclaimer The present document has been produced and approved by intelligent Compound Content Management (CCM) ETSI Industry Specification Group (ISG) and represents the views of those members who participated in this ISG.

2、It does not necessarily represent the views of the entire ETSI membership. GROUP SPECIFICATION ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 2 Reference DGS/CCM-001 Keywords CCM system, HDR, HDR composer, HDR Metadata Embedder, UHDTV, WCG ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE T

3、el.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made av

4、ailable in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the on

5、ly prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and ot

6、her ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or u

7、tilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend t

8、o reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and

9、 of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g3Introduction 5g31 Scope 7g32 References 7g32.1 Normative r

10、eferences . 7g32.2 Informative references 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.2.1 Arithmetic operators . 9g33.2.2 Bit-wise operators. 9g33.2.3 Relational operators 9g33.2.4 Assignment operators . 9g33.2.5 Mathematical functions . 9g33.2.6 Order of operation pr

11、ecedence 10g33.3 Abbreviations . 10g34 CCM system model 11g35 Composer definition . 12g35.1 Introduction 12g35.2 Input and output picture format 12g35.2.1 General 12g35.2.2 Input picture format 12g35.2.3 Output picture format 13g35.3 Composing metadata (CM) definitions 13g35.3.1 Introduction. 13g35.

12、3.2 CM header parameter definitions 13g35.3.3 CM mapping parameter definitions 14g35.3.3.1 CM general mapping parameter definitions 14g35.3.3.2 CM polynomial mapping parameter definitions 14g35.3.3.3 CM MMR mapping parameter definitions 15g35.3.4 CM quantization parameter definitions. 15g35.4 Compos

13、ing process. 16g35.4.1 Introduction. 16g35.4.2 Inverse mapping of the base layer signal 16g35.4.2.1 General 16g35.4.2.2 Derivation of the pivot index 17g35.4.2.3 BL input sample mapping . 17g35.4.2.3.1 General 17g35.4.2.3.2 Polynomial mapping 18g35.4.2.3.3 MMR mapping 18g35.4.3 Enhancement layer pro

14、cessing 20g35.4.3.1 General 20g35.4.3.2 Enhancement layer non-linear inverse quantization (NLQ_LINEAR_DZ) 20g35.4.3.3 HDR signal reconstruction 21g35.5 Conversion to SMPTE ST 2084 transfer characteristics 21g36 HDR display management (DM) metadata embedder definition . 22g36.1 Introduction 22g36.2 H

15、DR display management metadata definition 22g36.2.1 HDR display management metadata syntax . 22g36.2.2 HDR display management metadata semantics 24g3ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 4 6.3 HDR DM metadata transmission 29g36.3.1 HDR DM metadata transmission packetization 29g36.3.2 HDR DM metadata

16、 transmission packet header . 30g36.3.3 HDR DM metadata transmission packet body 31g36.3.3.1 HDR DM metadata transmission packet body (packet_type = 0b00) . 31g36.3.3.2 HDR DM metadata transmission packet body (packet_type = 0b01) . 31g36.3.3.3 HDR DM metadata transmission packet body (packet_type =

17、 0b10 or 0b11) 31g36.3.4 HDR DM metadata transmission packet tail . 32g36.4 Embedding HDR DM metadata transmission packets in an HDR signal . 32g36.4.1 Embedding a single HDR DM metadata transmission packet (packet_type = 0b00) . 32g36.4.2 Bit scrambling . 32g36.4.3 Repetition of HDR DM metadata tra

18、nsmission packets . 33g36.4.4 Embedding multiple HDR DM metadata transmission packets (packet_type 0b00) . 34g3Annex A (normative): Profiles and Levels . 35g3A.1 Introduction 35g3A.2 Profiles . 35g3A.2.1 Main profile / ETSI profile 1 35g3A.2.2 ETSI profile 2 . 35g3A.2.3 ETSI profile 3 . 35g3A.3 Leve

19、ls . 36g3Annex B (informative): EL and BL spatial resampling 37g3B.1 Introduction 37g3B.2 Base layer spatial resampling . 37g3B.3 Enhancement layer spatial resampling . 37g3Annex C (informative): Method for the conversion of transfer characteristics from Recommendation ITU-R BT.1886 to SMPTE ST 2084

20、 38g3History 42g3ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, an

21、d can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the

22、 ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fore

23、word This Group Specification (GS) has been produced by ETSI Industry Specification Group (ISG) on intelligent Compound Content Management (CCM). Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ ar

24、e to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document defines and specifies the additional functional

25、ity required in consumer devices to enable the accurate recreation of both todays television signal, i.e. SDR signal, and the HDR/WCG signal from content created using the relevant production techniques standardized in SMPTE. The requirement not to compromise the quality of the legacy signal using t

26、odays displays but yet to provide the highest quality HDR/WCG signal for a new generation of televisions is onerous and requires analysis to derive an optimal solution. However, given the requirement to achieve backwards compatibility with existing receivers, some additional technology will be requi

27、red in the next generation of HDR/WCG receivers to accurately recreate the HDR/WCG signal. The full HDR system as shown in the figure 1 describes an end-to-end technology suite that enables the creation and distribution of content mastered with a high dynamic range and wide colour gamut. Display man

28、agement may be used to more accurately match the capability of a given television to the HDR/WCG signal source. This creates seamless video experience for the viewer. The display management process may be guided by metadata generated in the HDR encoder. ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 6 Figure

29、 1: Overview of a generic HDR system and the additional HDR Compound Content Management functionality ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 7 1 Scope The present document specifies the additional functionality required in Consumer devices for the reconstruction of an HDR/WCG signal using the “intell

30、igent Compound Content Management“ processing defined. Additionally it defines a method whereby this HDR/WCG signal and its associated metadata is transported over existing commonly used consumer baseband interfaces. This process is one element of an end-to-end HDR video system. The definition of th

31、e overall end-to-end HDR video system is out of scope of the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. Fo

32、r non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this claus

33、e were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 SMPTE ST 2084:2014: “Dynamic Range Electro-Optical Transfer Function of Mastering Reference Displays“. 2 SMPTE ST 2

34、086:2014: “Mastering Display Color Volume Metadata Supporting High Luminance And Wide Color Gamut Images“. 3 SMPTE ST 2094-1:2016: “Mapping VC-3 Coding Units into the MXF Generic Container“. 4 SMPTE ST 2094-10:2016: “Dynamic Metadata for Color Volume Transform - Application #1“. 5 Recommendation ITU

35、-R BT.1886-0: “Reference electro-optical transfer function for flat panel displays used in HDTV studio production“. 6 Recommendation ITU-R BT.2100-0: “Image parameter values for high dynamic range television for use in production and international programme exchange“. 7 Recommendation ITUg486R BT.70

36、9g4866: “Parameter values for the HDTV standards for production and international programme exchange“. 8 Recommendation ITUg486R BT.2020g4862: “Parameter values for ultrag486high definition television systems for production and international programme exchange“. 9 Recommendation ITU-T H.265 | ISO/IE

37、C 23008-2: “Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 2: High efficiency video coding“. 10 ISO/IEC 13818-1: “Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems“. ETSI ETSI GS CCM

38、001 V1.1.1 (2017-02) 8 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced doc

39、ument (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the use

40、r with regard to a particular subject area. i.1 SMPTE 319M-2000: “For Television - Transporting MPEG-2 Recoding Information through 4:2:2 Component Digital Interfaces“. i.2 Recommendation ITU-R BT.2246-2: “The present state of ultra-high definition television“. 3 Definitions and abbreviations 3.1 De

41、finitions For the purpose of the present document, the following terms and definitions apply: base layer: carries the video signal of the compound content which is used for the prediction of the HDR/WCG signal block: MxN (M-column by N-row) array of samples Compound Content Management (CCM): process

42、 deriving a picture with a high dynamic range NOTE: The high dynamic range picture is derived from a BL, metadata and potentially an EL. This method can be part of the encoding / decoding process or not. composer: component deriving a picture with a high dynamic range NOTE: The composer is controlle

43、d by metadata and combines two baseband pictures derived from decodable compressed streams. display management: process adapting the signal to the dynamic range and the colour gamut of the target display dynamic range: ratio of the maximum light intensity to the minimum light intensity i.2 NOTE: In

44、digital cameras the dynamic range is normally measured in terms of stops, which describe the total light range by power of 2. enhancement layer: carries the additional information required to accurately recreate the HDR/WCG signal high dynamic range: typically a dynamic range of more than 10 stops i

45、s referred to as high dynamic range inverse mapping: colour mapping of the BL signal to form a predictor for the EL signal inverse quantization: non-linearly scales the EL signal from a code word with a bit depth equal to EL_bit_depth to a code word with a higher bit depth residual: EL signal which

46、is the difference of the inverse mapped BL signal and the high dynamic range output signal standard dynamic range: typically a dynamic range of up to 10 stops is referred to as standard dynamic range ETSI ETSI GS CCM 001 V1.1.1 (2017-02) 9 3.2 Symbols 3.2.1 Arithmetic operators For the purposes of t

47、he present document, the following arithmetic operators apply: + Addition - Subtraction (as a two-argument operator) or negation (as a unary prefix operator) g535 Multiplication, including matrix multiplication Used to denote division in mathematical equations where no truncation or rounding is inte

48、nded. g512 Integer division with truncation of the result toward zero. For example, 7/4 and - 7/- 4 are truncated to 1 and - 7/4 and 7/- 4 are truncated to - 1. 3.2.2 Bit-wise operators For the purposes of the present document, the following bit-wise operators apply: x y Arithmetic right shift of a

49、twos complement integer representation of x by y binary digits. This function is defined only for non-negative integer values y. Bits shifted into the most significant bits (MSBs) as a result of the right shift have a value equal to the MSB of x prior to the shift operation. x Greater than = Greater than or equal to =1) 1 MAPPING_MMR MMR mapping5.3.3.2 CM polynomial mapping parameter definitions poly_order_minus1 cmp pivot_idx plus 1 specifies the order of the polynomial mapping method identified by mapping_idc cmp pivot_idx . The v