ETSI GSM 02 07-1996 Digital Cellular Telecommunications System (Phase 2+) Mobile Stations (MS) Features《数字蜂窝通信系统(第2+阶段) 移动台(MS)特征(版本5 1 0)》.pdf

1、ETSI GSM*02.07 76 GSM GSM 02.07 July 1996 Version 5.1 .O Source: ETSI TC-SMG Reference: TS/SMG-O10207QR ICs: 33.060.50 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS Digital cellular telecommunications syst

2、em (Phase 2+); Mobile Stations (MS) features (GSM 02.07) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipoiis CEDEX - FRANCE Off ice address: 650 Route des Lucioles - Sophia Antipoiis - Valbonne - FRANCE X.400: c=fr, a=atlas, p=etsi, s=secret

3、ariat - Internet: secretariat etsi.fr Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards In

4、stitute 1996. All rights reserved. ETSI GSM*02=07 96 W 3400855 0330667 767 Page 2 GSM 02.07 Version 5.1.0: July 1996 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its acc

5、uracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. ETSI GSM*02*07 96 3400855 0330668 bT3 Page 3 GSM 02.07 Version 5.1 .O. July 1996 Contents Foreword . 5 1 Scope 7 1.1 Normative references 7 1.2 Definition 8 Requirements for implementing MS feat

6、ures 8 Automatic calling repeat call attempt restrictions . 11 Descnotion of mobile station features 13 2 Annex A (nonnative): Annex B (normative): B.l.l B.1.2 B.1.3 B.1.4 B.1.5 B.1.6 B.1.7 B.1.8 B.1.9 8.1.10 B.1.11 B.1.12 B.1.13 B.1.14 8.1.15 B.1.16 B.l . I7 6.1.18 B.1.19 B.1.20 B.1.21 B . 1.22 B.1

7、.23 B.1.24 B.1.25 8.2.1 8.3.1 8.3.2 8.3.3 B.3.4 8.3.5 B.3.6 B.3.7 B.3.8 Display of called number 13 Indication of call progress signals 13 CountryPLMN indication . 13 CountryPLMN selection 13 Keypad . 13 IMEI 13 Short message indication and acknowledgement . 14 Short message overflow indication 14 D

8、TWDCE interface 14 ISDN “S“ terminal interface 14 International access function . 14 Service Indicator (SI) . 14 Autocalling restriction capabilities 14 Emergency Calls capabilities . 14 Dual Tone Multi Frequency (DTMF) 14 Subscription identity management . 15 On/Off switch . 15 Sub-Address 15 Suppo

9、rt of encryption A5/1 and A5/2 . 15 Short Message Service Cell Broadcast . 15 Short Message Service Cell Broadcast DRX . 15 Service Provider Indication 15 Support of the extended Short message cell broadcast channel 15 Support of Additional Call Set-up MMI Procedures . 16 Network Identity and Timezo

10、ne . 16 Support of supplementary services . 16 Abbreviated dialling 16 Fixed number dialling . 16 Barring of outgoing calls 17 DTMF control digits separator . 17 Selection of directory number in short messages 18 Last Numbers Dialled (LND) 18 ME-SIM lock . 18 Service Dialling Numbers . 18 Annex C (n

11、ormative): GSM-MOU ID1 SIM layout 19 History 20 Page 4 GSM 02.07 Version 5.1 .O: July 1996 Blank page - ETSI GSM*02.07 96 m 3400855 OL30b70 251 Page 5 GSM 02.07 Version 5.1 .O: July 1996 Foreword This Global System for Mobile communications Technical Specification (GTS) has been produced by the Spec

12、ial Mobile Group (SMG) Technical Committee (TC) of the European Telecommunications Standards Institute (ETSI). This GTS specifies mobile station features within the digital cellular telecommunications system (Phase 2Phase 2+). This GTS is a TC-SMG approved GSM technical specification version 5, whic

13、h contains GSM Phase 2+ enhancementdfeatures to the version 4 GSM technical specification. The ETS from which this Phase 2+ GTS has evolved is Phase 2 GSM ETS 300 505 Edition 2 (GSM 02.07 version 4.7.0). GTS are produced by TC-SMG to enable the GSM Phase 2+ specifications to become publicly availabl

14、e, prior to submission for the formal ETSI standards approval procedure to become European Telecommunications Standards (ETS). This ensures the earliest possible access to GSM Phase 2+ specifications for all Manufacturers, Network operators and implementors of the Global System for Mobile com mu n c

15、ations. The contents of this GTS are subject to continuing work within TC-SMG and may change following formal TC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Ve

16、rsion 5.x.y where: y the third digit is incremented when editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. The specification from which this GTS has been derived

17、 was originally based on CEPT documentation, hence the presentation of this GTS may not be entirely in accordance with the ETSI rules. Reference is made within this GTS to GSM-TSs (note). NOTE: TC-SMG has produced documents which give the technical specifications for the implementation of the digita

18、l cellular telecommunications system. Historically, these documents have been identified as GSM Technical Specifications (GSM-TSs). These TSs may have subsequently become I-ETSs (Phase l), or ETSs/ETSI Technical Reports (ETRs) (Phase 2). TC-SMG has also produced ETSI GSM TSs which give the technical

19、 specifications for the implementation of Phase 2+ enhancements of the digital cellular telecommunications system. These version 5.x.x GSM Technical Specifications may be referred to as GTSs. ETSI GSM*02-07 96 3400855 OL3067L 198 Page 6 GSM 02.07 Version 5.1.0: July 1996 Blank page ETSI GSM*02=07 7b

20、 m 3400855 OL30b72 O24 m Page 7 GSM 02.07 Version 5.1 .O: July 1996 1 Scope The purpose of this ETS is to define mobile station features and to classify them according to their type and whether they are mandatory or optional. The MS features detailed in this Specification do not represent an exhaust

21、ive list. Those MS features which are subject to Type Approval are described in GSM 11.10. 1.1 Normative references This ETS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publication

22、s are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this ETS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 41 51 VI 191 31 i 41 GSM O1 .O4

23、 (ETR 100): “Digital cellular telecommunication system (Phase 2);Abbreviations and acronyms“. GSM 02.03 (ETS 300 502): “Digital cellular telecommunication system (Phase2); Teleservices supported by a GSM Public Land Mobile Network (PLMN)“. GSM 02.04 (ETS 300 503): Digital cellular telecommunication

24、system (Phase 2); General on supplementary services“. GSM 02.1 1 (ETC 300 507): Digital cellular telecommunication system (Phase 2); Service accessibility“. GSM 02.1 6 (ETC 300 508): “Digital cellular telecommunication system (Phase 2); International Mobile station Equipment Identities (IMEI)“. GSM

25、02.1 7 (ETC 300 509): Digital cellular telecommunication system (Phase 2); Subscriber identity modules Functional characteristics“. GSM 02.30 (ETS 300 51 1): “Digital cellular telecommunication system (Phase 2); Man-Machine Interface (MMI) of the Mobile Station (MS)“. GSM 02.40 (ETS 300 51 2): “Digi

26、tal cellular telecommunication system (Phase 2); Procedures for call progress indications“. GSM 02.90 (ETC 300 625): “Digital cellular telecommunication system (Phase 2); Stage 1 description of Unstructured Supplementary Service Data (U USD)“. GSM 03.03 (ETC 300 523): “Digital cellular telecommunica

27、tion system (Phase 2); Numbering, addressing and identification“. GSM 03.14 (ETS 300 532): “Digital cellular telecommunication system (Phase 2); Support of Dual Tone Multi-Frequency signalling (DTMF) via the GSM system“. GSM 04.08 (ETS 300 557): “Digital cellular telecommunication system (Phase 2);

28、Mobile radio interface layer 3 specification“. GSM 11.10 (ETC 300 607): “Digital cellular telecommunication system (Phase 2); Mobile Station (MS) conformity specification“. GSM 1 1.1 1 (ETS 300 608): “Digital cellular telecommunication system (Phase 2); Specification of the Subscriber Identity Modul

29、e-Mobile Equipment (SIM-ME) interface“. ETSI GSM*02-07 96 3400855 0130673 TbO Page 8 GSM 02.07 Version 5.1 .O: July 1996 1.2 Definition In addition to those below, abbreviations used in this specification are listed in GSM 01.04. An MS feature is defined as a piece of equipment of function which dir

30、ectly relates to the operation of the MS. On the basis of this, three categories of features can be distinguished: basic, supplementary and additional features. Basic MS features A basic MS feature is directly related to the operation of basic telecommunication services (e.g. key-pad function). Supp

31、lementary MS features A supplementary MS feature is directly related to the operation of supplementary services (e.g. display of calling line number). Additional MS features An additional MS feature is a feature which is neither a basic nor a supplementary feature (e.g. abbreviated dialling). Additi

32、onal MS features and supplementary services may be used independently according to the choice of subscribers/users (e.g. barring of outgoing calls). Features not directly relevant to the use as a Mobile Station are permitted, provided they do not interfere with the performance of the MS (e.g. a cloc

33、k). 2 Requirements for implementing MS features MS features are qualified as mandatory or optional. Mandatory features have to be implemented as long as they are relevant to the MS type, and will be subject to Type Approval when applied according to GSM 11.10. Whether or not an optional feature is i

34、mplemented is left to the manufacturers discretion. The method of implementation of all MS features must be done in accordance with the appropriate GSM specifications. For all present and future MS features, manufacturers have the responsibility to ensure that the MS features will neither conflict w

35、ith the air interface nor cause any interference to the network or any other MS or its own MS, and these requirements shall be recognized during the Type Approval process. In the following tables VGSM 02.07, 2/GSM 02.07 and 3/GSM 02.07 the basic, supplementary and additional MS features are listed.

36、Mandatory features are marked by “M“. Optional features are marked by “O“. Additional MS features not listed in Table 3/GSM 02.07 are permitted without the requirement for this table to be amended, provided that these new features do not affect the mandatory air interface requirements. Unless otherw

37、ise stated for a particular feature, the feature supported by the Subscriber Identity Module (SIM) takes priority over the same feature supported by the Mobile Equipment (ME). Page 9 GSM 02.07 Version 5.1 .O: July 1996 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.

38、21 1.22 1.23 1.24 Table l/GSM 02.07: Basic MS features NAME MANDATORY (M) OPTIONAL (O) 1.1 Display of Called Number M* 1.2 1.3 Indication of Call Progress Signals CountryPLMN Indication CountryPLMN Selection Keypad IMEI Short Message Short Message Overflow Indication DTffDCE Interface ISDN “S“ Inter

39、face International Access Function (“+“ key) Service Indicator Autocalling restriction capabilities Emergency Calls capabilities Dual Tone Multi Frequency function (DTMF) Subscription Identity Management On1f switch Su baddress Support of Encryption A511 and A512 Short Message Service Cell Broadcast

40、 Short Message Service Cell Broadcast DRX Service Provider Indication Support of the extended SMS CB channel SUDDOTI of Additional Call Set-up MMI Procedures M* M* M O (NOTE 1) M M (NOTE 4) M O O O (NOTE 1) M* (NOTE 2) M (NOTE 3) M (NOTE 5) M O O M M O O O O 11.25 NeGork Identity and Timezone O Desc

41、riptions are given in Annex B to GSM 02.07. Mandatory where a human interface is provided, .e. may be in-appropriate for MS driven by external equipment. NOTE 1 : NOTE 2: NOTE 3: NOTE 4: NOTE 5: The physical means of entering the characters 0-9, +, * and # may be keypad, voice input device, DTE or o

42、thers, but it is mandatory that there shall be the means to enter this information. MTs with capabilities for Autocalling, or to which call initiating equipment can be connected via the “R“ or “S“ interface, shall restrict repeated call attempts according to the procedures described in Annex A. Emer

43、gency calls shall be possible according to Teleservice 12 (see rec GSM 02.03 and 02.30). This feature is only required to be provided by ME supporting Telephony. Support of reception by the ME and storage of SMS MT in the SIM is mandatory, but its .display is optional. Reception and storage of a mes

44、sage shall be indicated by the MS. The use of DTMF is only mandatory when the speech teleservice is being used or during the speech phase of alternate speecWdata and alternate speechlfacsimile teleservices. ETSI GSM*02*07 96 = 3400855 OL30675 833 m Page 10 GSM 02.07 Version 5.1 .O: July 1996 Table 2

45、/GSM 02.07: Supplementary MS features NAME MANDATORY (M) OPTIONAL (O) 2.1 Control of Supplementary Services (NOTE 1) NOTE 1 : See Annex B. clause 8.2.1. Descriptions are given in annex B to GSM 02.07. Table 3/GSM 02.07: Additional MS features _ NAME MANDATORY (M) OPTIONAL (O) 3.1 Abbreviated Diallin

46、g O 3.2 Fixed Number Dialling O 3.3 Barring of Outgoing Calls O 3.4 DTMF Control Digits Separator O 3.5 Selection of Directory No in Short Messages O 3.6 Last Numbers Dialled O 3.7 ME-SIM lock O 3.8 Service Dialling Numbers O Descriptions are given in the appendix to GSM 02.07. - - ETSI GSN*OZ.07 96

47、 3400855 0130676 77T Page 11 GSM 02.07 Version 5.1 .O: July 1996 Annex A (normative): Automatic calling repeat call attempt restrictions Call set up attempts referred to in this annex are assumed to be initiated from peripheral equipment or automatically from the MT itself. A repeat call attempt may

48、 be made when a call attempt is unsuccessful for the reasons listed below (as defined in GSM 04.08). These reasons are classified in three major categories: 1. “Busy destination“: Cause number 17 User busy 2. “Unobtainable destination - temporary“: Cause number 18 19 27 34 41 42 44 47 No user respon

49、ding User alerting, no answer Destination out of order No circuitlchannel available Temporary failure Switching Equipment congestion Requested circuitlchannel not available Resources unavailable, unspecified 3. “Unobtainable destination - permanentnong term“: Cause number 1 Unassigned (unallocated) number 3 No route to destination 22 Number changed 28 Invalid number format (uncomplete number) 38 Network out of order. NOTE: Optionally, it is allowed to implement cause number 27 in Category 3, instead of Category 2, as this is desirable alre