ETSI GSM 03 10-1998 Digital Cellular Telecommunications System (Phase 2+) GSM Public Land Mobile Network (PLMN) Connection Types《数字蜂窝通信系统(第2+阶段) GSM公共陆地移动网(PLMN)连接类型(版本5 4 0)》.pdf

1、STD.ETS1 GSM 03.10-ENGL LY m 31i00855 02bA590 040 GSM 03.10 January 1998 Version 5.4.0 Source: SMG Reference: RGTS/SMG-O403100R3 ICs: 33.020 Key words : Digital cellular telecommunications system, Global System for Mobile communications (GSM) Digital cellular telecommunications system (Phase 2+); GS

2、M Public Land Mobile Network (PLMN) connection types (GSM 03.1 O version 5.4.0) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE X.400: c=fr, a=a

3、tlas, p=etsi, s=secretariat - Internet: secretariatetsi.fr Tel.:+33492944200-Fax:+33493654716 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications S

4、tandards Institute 1998. All rights reserved. STD=ETSI GSM 03-1O-ENGL 1778 3400855 02b859L T87 H Page 2 GSM 03.10 version 5.4.0: January 1998 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have co

5、mments concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. STD-ETSI GSM 03.LO-ENGL 1994 3i.100855 02b8592 913 Page 3 GSM 03.10 version 5.4.0: January 1998 Contents Foreword . 5 1 2 3 4 5 6 7 Scope . 7 Normative references. 7 Def

6、initions and Abbreviations 11 3.1 Definitions . 11 3.2 Abbreviations 11 General considerations 11 4.1 4.2 4.3 Relationship between lower layer capabilities and radio traffic channels . 11 Transparent and non-transparent lower layer capabilities 12 The GSM environment . 12 4.3.1 The hand-over procedu

7、re 12 4.3.2 DTX procedure . 13 Framework for the description of connection types . 13 5.2 Purpose of GSM PLMN connection types 13 5.3 Functions associated with a GSM PLMN connection 14 5.4 Applications of GSM PLMN connection types 14 5.5 5.1 Introduction . 13 GSM PLMN connection involving several ne

8、tworks . 16 GSM PLMN connection types . 16 Description of GSM PLMN connection types 16 6.1.1 Rate adaptation 17 6.1.2 6.1.3 Layer 2 Relay function 19 6.1.4 GSM PLMN connection elements 19 Rules of association for the attribute values of connection elements and connection types 20 6.3.1 Information t

9、ransfer mode . 20 6.3.2 6.3.3 Information transfer susceptance . 20 6.3.4 Establishment of connection 21 6.3.5 Symmetry 21 6.3.6 Connection configuration Topology . 21 6.3.7 Structure 21 6.3.8 Channels 22 Information channel (rate) 22 Connection control protocol . 22 Information transfer coding/prot

10、ocol . 22 Further attributes and attribute values 23 Limited set of GSM PLMN connection types (for TCWF14.4 channel coding) . 24 6.1 Radio Link Protocol . 19 Resources allocated by the GSM network 19 6.2 6.3 Information transfer rate (kbitls) 20 6.3.8.1 6.3.8.2 Signalling channel (rate) . 22 6.3.9 6

11、.3.10 6.3.1 1 Limited set of GSM PLMN connection types (all channel codings excluding TCH/F14.4) 23 6.4 6.5 Relationship between Telecommunication services and connection types . 41 General 7.1 41 7.2 Relationship between Bearer services and connection types . 41 7.3 Relationship between Teleservice

12、s and connection types 41 STD-ETSI GSM 03=LO-ENGL 1978 I 3400855 021.18593 85T Page 4 GSM 03.10 version 5.4.0: January 1998 7.4 7.5 Network capability to support in-call modification 41 Network capability to support channel mode modification 41 Annex A (informative): List of definitions of GSM PLMN

13、connection type attributes and values 51 A.l Attribute definition and their values 51 A.2 Definition of values . 58 Annex B (informative): Location of the transcoding. multiplexing and RA2 functions 59 History 63 STD.ETSI GSM 03-LO-ENGL 1998 m 3400855 02b8594 77b m Page 5 GSM 03.10 version 5.4.0: Ja

14、nuary 1998 Foreword This Global System for Mobile communications Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) of the European Telecommunications Standards Institute (ETSI). A GSM PLMN may be described by a limited set of access interfaces (refer to GSM 04.02 and

15、02.01) and a limited set of GSM PLMN connection types to support the telecommunication services described in the GSM 02-series of specifications. This GTS identifies and defines these connection types in so far as they relate to the particular network capabilities for a GSM PLMN within the digital c

16、ellular telecommunications system (Phase 2/Phase 2+). The contents of this GTS are subject to continuing work within SMG and may change following formai SMG approval. Should SMG modify the contents of this GTS it w ill then be republished by ETSI with an identifying change of release date and an inc

17、rease in version number as follows: Version 5.x.y where: y the third digit is incremented when editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. The specificatio

18、n from which this GTS has been derived was originally based on CEPT documentation, hence the presentation of this GTS may not be entirely in accordance with the ETSI rules. STD=ETSI GSM 03-LO-ENGL 1778 3V00855 02b8575 b22 Page 7 GSM 03.10 version 5.4.0: January 1998 1 scope A GSM PLMN may be describ

19、ed by a limited set of access interfaces (refer to GSM 04.02 and 02.01) and a limited set of GSM PLMN connection types to support the telecommunication services described in the GSM 02-series of specifications. This Global System for Mobile communications Technical Specification (GTS) identifies and

20、 defines these connection types in so far as they relate to the particular network capabilities for a GSM PLMN. The basic lower layer capabilities of a GSM PLMN are represented by a set of GSM PLMN connection types. The definition of a set of GSM PLMN connection types provides the necessary input to

21、 identify network capabilities of a GSM PLMN. In addition to describing network capabilities of a GSM PLMN, the identification of connection types facilitates the specification of network-to-network interfaces. It may also assist in the allocation of network performance parameters. This specificatio

22、n should be considered in conjunction with other GSM specifications with particular reference to GSM 01.02, 02.01, 02.02, 02.03, 03.01, 03.02, 04.02 and 04.03. This specification provides a bridge between the service specification in the GSM 02-series of specifications and the more detailed specific

23、ations such as the GSM 03, 04, 07 and O9 series. As such, it establishes a framework for the specification and understanding of the more detailed specifications. It is therefore not a specification against which detailed conformance testing can be performed. However, it shall be considered mandatory

24、 for the understanding of the more detailed specifications and used to resolve issues of conflict in these specifications. 2 Normative references This GTS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places i

25、n the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this GTS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 4

26、1 51 GSM 01.02: “Digital cellular telecommunications system (Phase 2+); General description of a GSM Public Land Mobile Network (PLMN)“. GSM O1 .O4 (ETR 350): “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. GSM 02.01 : “Digital cellular telecommunications system

27、(Phase 2+); Principles of telecommunications services supported by a GSM Public Land Mobile Network (PLMN)“. GSM 02.02 (ETS 300 904): “Digital cellular telecommunications system (Phase2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)“. GSM 02.03 (ETS 300 905): “Digital c

28、ellular telecommunications system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)“. GSM 03.01 : “Digital cellular telecommunications system (Phase 2+); Network functions“. GSM 03.02: “Digital cellular telecommunications system (Phase 2+); Network architecture“. GSM 03.0

29、9: “Digital cellular telecommunications system (Phase 2+); Handover procedu res“. GSM 03.34 (TS 1 O1 038): “Digital cellular telecommunications system (Phase 2+); High Speed Circuit Switched Data (HSCSD) - Stage 2 Service Description“. STD-ETSI GSM 03.LO-ENGL 1798 W 3ii00855 02b859b 5b9 Page 8 GSM 0

30、3.10 version 5.4.0: January 1998 11 31 11 61 i 91 1201 GSM 03.40 (ETS 300 901): “Digital cellular telecommunications system (Phase 2+); Technical realization of the Short Message Service (SMS) Point-to-Point (PP)“. GSM 03.41 (ETS 300 902): “Digital cellular telecommunications system (Phase 2+); Tech

31、nical realization of Short Message Service Cell Broadcast (SMSCB)“. GSM 03.45 (ETS 300 931): “Digital cellular telecommunications system; Technical realization of facsimile group 3 transparent“. GSM 04.01 : “Digital cellular telecommunications system; Mobile Station - Base Station System (MS - BSS)

32、interface General aspects and principles“. GSM 04.02: “Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration“. GSM 04.03: “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) inte

33、rface Channel structures and access capabilities“. GSM 04.05 (ETS 300 937): “Digital cellular telecommunications system; Data Link (DL) layer; General aspects“. GSM 04.06 (ETS 300 938): “Digital cellular telecommunications system; Mobile Station - Base Station System (MS - BSS) interface Data Link (

34、DL) layer specification“. GSM 04.07 (ETS 300 939): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface signalling layer 3; General aspects“. GSM 04.08 (ETS 300 940): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification“. GSM

35、04.1 1 (ETS 300 942): “Digital cellular telecommunications system (Phase 2+); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface“. GSM 04.12 (ETS 300 943): “Digital cellular telecommunications system (Phase2+); Short Message Service Cell Broadcast (SMSCB) support on th

36、e mobile radio interface“. GSM 04.21 (ETS 300 945): “Digital cellular telecommunications system; Rate adaption on the Mobile Station - Base Station System (MS - BSS) interface“. GSM 04.22 (ETS 300 946): “Digital cellular telecommunications system (Phase 2+); Radio Link Protocol (RLP) for data and te

37、lematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-setvices Switching Centre (BSS - MSC) interface“. GSM 05.01 : “Digital cellular telecommunications system (Phase 2+); Physical layer on the radio path General description“. GSM 05.0

38、3 (ETS 300 909): “Digital cellular telecommunications system (Phase 2+); Channel coding“. GSM 05.08 (ETS 300 91 1): “Digital cellular telecommunications system (Phase 2+); Radio subsystem link control“. GSM 06.31 (ETS 300 964): “Digital cellular telecommunications system; Full rate speech; Discontin

39、uous Transmission (DTX) for full rate speech traffic channels“. GSM 07.01 (ETS 300 91 3): “Digital cellular telecommunications system (Phase 2+); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)“. GSM 07.02 (ETS 300 91 4): “Digital cellular telecommunications system (Phase 2+)

40、; Terminal Adaptation Functions (TAF) for seMces using asynchronous bearer capabilities“. _ STD-ETSI GSM 03-1O-ENGL 1978 W 3400855 02b8597 4T5 W Page 9 GSM 03.10 version 5.4.0: January 1998 i341 GSM 07.03 (ETS 300 91 5): “Digital cellular telecommunications system (Phase 2+); Terminal Adaptation Fun

41、ctions (TAF) for services using synchronous bearer capabilities“. GSM 08.04: “Digital cellular telecommunications system; Base Station System - Mobile-services Switching Centre (BSS - MSC) interface Layer 1 specification“. GSM 08.06: “Digital cellular telecommunications system; Signa Ilhg transport

42、mechanism specification for the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface“. GSM 08.08: “Digital cellular telecommunications system (Phase 2+); Mobile Switching Centre - Base Station System (MSC - BSS) interface Layer 3 specification“. GSM 08.20: “Digital cellular t

43、elecommunications system; Rate adaption on the Base Station System - Mobile-services Switching Centre (BSS - MSC) in terface“. GSM 09.04: “Digital cellular telecommunications system; Interworking between the Public Land Mobile Network (PLMN) and the Circuit Switched Public Data Network (CSPDN)“. GSM

44、 09.05: “Digital cellular telecommunications system; Interworking between the Public Land Mobile Network (PLMN) and the Packet Switched Public Data Network (PSPDN) for Packet Assembly/Disassembly facility (PAD) access“. GSM 09.06 (ETS 300 975): “Digital cellular telecommunications system (Phase 2+);

45、 Interworking between a Public Land Mobile Network (PLMN) and a Packet Switched Public Data Networkllntegrated Services Digital Network (PSPDNASDN) for the support of packet switched data transmission services“. GSM 09.07 (ETS 300 976): “Digital cellular telecommunications system (Phase 2+); General

46、 requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)“. CCITT Recommendation 1.460: “Multiplexing, rate adaption and support of existing interfaces“. CCITT Recommendation V.11 O: “Sup

47、port of Data Terminal Equipments (DTEs) with V-Series interfaces by an integrated services digital network“. CCITT Recommendation V.21: “300 bits per second duplex modem standardised for use in the general switched telephone network. CCITT Recommendation V.22: “1 200 bits per second duplex modem sta

48、ndardised for use in the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits“. CCITT Recommendation V.22bis: “2 400 bits per second duplex modem using the frequency division technique standardised for use on the general switched telephone network and on poi

49、nt-to-point 2-wire leased telephone-type circuits“. CCITT Recommendation V.23: “600/1 200-band modem standardised for use in the general switched telephone network“. CCIT Recommendation V.24: “List of definitions for interchange circuits between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment ( DC E)“. CCITT Recommendation V.25: “Automatic answering equipment and/or parallel automatic calling equipment on the general switched telephone network including procedures for disabling of echo control devices for both manually and automatically establishe