ETSI GSM 11 11-1995 Digital Cellular Telecommunications System (Phase 2+) Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface (GSM 11 11)《数字蜂窝通信.pdf

1、GSM PECI FICATION GSM 11.11 December 1995 Version 5.0.0 Source: ETSI TC-SMG Reference: TSiSMG-O91111 Q ICs: 33.060.50 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS Digital cellular telecommunications syste

2、m (Phase 2+); Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface (GSM 11.11) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Off ice address: 650 Route des Lucioles - Sophia Antipolis -

3、 Valbonne - FRANCE X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariatetsi.fr Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by wtitten permission. The copyright and the foregoing restriction extend to reproduction

4、in all media. 8 European Telecommunications Standards Institute 1995. All rights reserved. Page 2 GSM 11.11 Version 5.0.0 December 1995 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or othewise, may occur. If you have comments

5、concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. Page 3 GSM 11.1 1 Version 5.0.0 December 1995 Contents Foreword . 7 1 Scope 9 2 Normative references 9 3 Definitions and abbreviations 11 3.1 Definitions 11 3.2 Abbreviations .

6、 12 3.3 Symbols . 13 4 Physical characteristics . 13 Format and layout 13 4.1.1 ID-1 SIM 13 4.1 -2 Plug-in SIM 13 Temperature range for card operation . 14 4.3 Contacts . 14 4.3.1 Provision of contacts . 14 4.3.2 Activation and deactivation 14 4.3.3 Inactive contacts 14 4.3.4 Contact pressure . 14 4

7、.4 Precedence 14 4.5 Static Protection . 15 4.1 4.2 5 Electronic signals and transmission protocols 15 5.1 5.2 Reset (RST) (contact C2) 15 5.3 Programming voltage Vpp (contact C6) . 16 5.4 5.5 I/O (contact C7) . 16 5.6 States . 17 5.7 Baudrate 17 5.0 5.8.1 Structure and contents 17 5.8.3 Speed enhan

8、cement . 20 Bicharacter duration and sampling time 20 Error handling 20 Supply voltage Vcc (contact C1) 15 Clock CLK (contact C3) . 16 Answer To Reset (ATR) . 17 5.8.2 PTS procedure 19 5.9 5.1 O 6 Logical Model 21 6.1 General description 21 6.2 File identifier . 21 6.3 Dedicated files . 22 6.4 Eleme

9、ntary files . 22 6.4.1 Transparent EF . 22 6.4.2 Linear fixed EF 22 Methods for selecting a file 24 Reservation of file IDS 25 6.4.3 Cyclic EF . 23 6.5 6.6 7 Security features . 25 Authentication and cipher key generation procedure . 25 Algorithms and processes . 26 File access conditions 26 7.1 7.2

10、 7.3 8 Description of the functions . 27 . Page 4 GSM 11.1 1 Version 5.0.0 December 1995 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.1 O 8.1 1 8.12 8.13 8.14 8.15 8.16 8.17 SELECT 27 STATUS 28 READ BINARY 28 UPDATE BINARY . 28 READ RECORD 28 UPDATE RECORD . 29 SEEK . 29 INCREASE 30 VERIFY CHV . 30 CHANGE

11、CHV 31 DISABLE CHV . 31 ENABLE CHV 31 UNBLOCK CHV 32 INVALIDATE . 32 REHABILITATE . 33 RUN GSM ALGORITHM . 33 SLEEP . 33 9 Description of the commands . 33 9.1 Mapping principles 33 9.2 Coding of the commands 35 9.2.1 SELECT 36 9.2.2 STATUS 39 9.2.3 READ BINARY 39 9.2.4 UPDATE BINARY . 39 9.2.5 READ

12、 RECORD . 39 9.2.6 UPDATE RECORD . 40 9.2.7 SEEK 40 9.2.8 INCREASE . 41 9.2.9 VERIFY CHV 41 9.2.1 O CHANGE CHV 41 9.2.1 1 DISABLE CHV 42 9.2.12 ENABLE CHV . 42 9.2.13 UNBLOCK CHV 42 9.2.14 INVALIDATE . 42 9.2.15 REHABILITATE 42 9.2.16 RUN GSM ALGORITHM 43 9.2.17 SLEEP 43 9.2.18 GET RESPONSE . 43 Def

13、initions and coding . 43 Status conditions returned by the card 45 9.4.1 Responses to commands which are correctly executed 45 9.4.2 Memory management . 45 9.4.3 Referencing management 45 9.4.4 Security management . 46 9.4.5 Application independent errors . 46 9.4.6 Commands versus possible status r

14、esponses . 46 9.3 9.4 10 Contents of the Elementary Files (EF) 47 10.1 Contents of the EFs at the MF level 47 10.1.1 EFICCID (ICC Identification) . 47 10.2 Contents of files at the GSM application level . 48 10.2.1 EFLP (Language preference) . 48 10.2.2 EFIMSI (iMSi) . 49 10.2.3 EFK (Ciphering key K

15、c) 50 10.2.4 EFpLMNsel (PLMN selector) 51 10.2.5 EFHLMN (HPLMN search period) 51 10.2.6 EFACMmax (ACM maximum value) 52 10.2.7 EFSST (SIM service table) . 52 10.2.8 EFACM (Accumulated call meter) 54 10.2.9 EFGID (Group Identifier Level 1) 55 10.2.10 EFGID (Group Identifier Level 2) 55 10.2.11 EFsN (

16、Service Provider Name) . 55 Page 5 GSM 11.1 1 Version 5.0.0 December 1995 10.2.12 EFUCT (Price per unit and currency table) . 56 10.2.13 EFCBMI (Cell broadcast message identifier selection) . 57 10.2.14 EFBCCH (Broadcast control channels) . 57 10.2.15 EFACC (Access control class) 57 10.2.16 EFFLMN (

17、Forbidden PLMNs) . 58 10.2.17 EFLOCI (Location information) . 59 10.2.1 8 EFAD (Administrative data) . 60 10.2.19 Contents of files at the telecom level . 61 10.3.1 10.3.2 EFFDN (Fixed dialling numbers) . 64 10.3.3 EFSMS (Short messages) 65 10.3.4 10.3.6 10.3.7 10.3.8 EFphase (Phase identification)

18、. 61 EFADN (Abbreviated dialling numbers) 62 EFccp (Capability configuration parameters) 66 10.3.5 EFMSISDN (MSISDN) 66 EFSMSP (Short message service parameters) 66 EFSMSS (SMS status) 68 EFLND (Last number dialled) 69 10.3.9 EFE (Extensionl) 69 10.3 10.3.10 EFEXT (Extension2) 71 10.4 Files of GSM (

19、figure 8) . 71 11 Application protocol . 73 1 1.1 General procedures . 74 11.1.1 Reading an EF 74 11.1.2 Updating an EF . 74 11.1.3 Increasing an EF . 74 SIM management procedures . 75 11 -2.1 SIM initialisation . 75 1 1.2.2 GSM session termination 76 11.2.3 Language preference 76 11.2.4 Administrat

20、ive information request; . 76 11.2.5 SIM service table request 76 11.2.6 SIM phase request 76 11.2.7 SIM Presence Detection 76 CHV related procedures 76 11.3.1 CHV verification . 77 11.3.2 CHV value substitution 77 11.3.3 CHV disabling 77 11.3.4 CHV enabling 77 11.3.5 CHV unblocking . 78 GSM securit

21、y related procedures 78 11.4.1 GSM algorithms computation 78 11.4.2 IMSI request 78 11.4.3 Access control request 78 11.4.4 HPLMN search period request 78 11.4.5 Location information 78 11.4.6 Cipher key . 78 11.4.7 BCCH information . 78 1 1.4.8 Forbidden PLMN . 78 11 5.1 Dialling numbers 79 11.5.2

22、Short messages 81 11.5.3 Advice of Charge (AOC) 81 11.5.4 11.5.5 PLMN selector . 82 11.5.6 Cell broadcast message identifier . 82 11 5.7 Group identifier level 1 82 11.5.8 Group identifier level 2 82 11.5.9 Service Provider Name . 82 11.2 11.3 11.4 1 1.5 Subscription related procedures 79 Capability

23、 configuration parameters 82 Annex A (normative): Plug-in SIM . 83 Annex B (informative): FDN Procedures . 84 Annex C (informative): Annex D (informative): Suggested contents of the EFs at pre-personalisation 88 Bibliography . 89 History . 90 Page 7 GSM 11.1 1 Version 5.0.0 December 1995 Foreword Th

24、is Global System for Mobile communications Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) Technical Committee (TC) of the European Telecommunications Standards Institute (ETSI). This GTS defines the interface between the Subscriber Identity Module (SIM) and the Mob

25、ile Equipment (ME) for use during the network operation phase of GSM as well as those aspects of the internal organisation of the SIM which are related to the network operation phase, within the digital cellular telecommunications system (Phase 2/Phase 2+). This GTS is a TC-SMG approved GSM technica

26、l specification version 5, which contains GSM Phase 2+ enhancementdfeatures to the version 4 GSM technical specification. The ETS from which this Phase 2+ GTS has evolved is Phase 2 GSM ETS 300 608 Edition 3 (GSM 11.1 1 version 4.16.0). GTS are produced by TC-SMG to enable the GSM Phase 2+ specifica

27、tions to become publicly available, prior to submission for the formal ETSI standards approval procedure to become European Telecommunications Standards (ETS). This ensures the earliest possible access to GSM Phase 2+ specifications for all Manufacturers, Network operators and implementors of the Gl

28、obal System for Mobile communications. The contents of this GTS are subject to continuing work within TC-SMG and may change following formal TC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase i

29、n version number as follows: Version 5.x.y where: y the third digit is incremented when editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. Reference is made withi

30、n this GTS to GSM-TSs (note). NOTE: TC-SMG has produced documents which give the technical specifications for the implementation of the digital cellular telecommunications system. Historically, these documents have been identified as GSM Technical Specifications (GSM-TSs). These TSs may have subsequ

31、ently become I-ETSs (Phase l), or ETSs/ETSI Technical Reports (ETRs) (Phase 2). TC-SMG has also produced ETSI GSM TSs which give the technical specifications for the implementation of Phase 2+ enhancements of the digital cellular telecommunications system. These version 5.x.x GSM Technical Specifica

32、tions may be referred to as GTSs. - ETSI UGSM*LL.LL 95 3400855 0079878 273 Page 8 GSM 11.11 Version 5.0.0 December 1995 Blank page Page 9 GSM 11.1 1 Version 5.0.0 December 1995 1 Scope This Global System for Mobile communications Technical Specification (GTS) defines the interface between the Subscr

33、iber Identity Module (SIM) and the Mobile Equipment (ME) for use during the network operation phase of GSM as well as those aspects of the internal organisation of the SIM which are related to the network operation phase. This is to ensure interoperability between a SIM and an ME independently of th

34、e respective manufacturers and operators. The concept of a split of the Mobile Station (MS) into these elements as well as the distinction between the GSM network operation phase, which is also called GSM operations, and the administrative management phase are described in the Technical Specificatio

35、n GSM 02.17 SI. This GTS defines: - the requirements for the physical characteristics of the SIM, the electrical signals and the transmission protocols; - the model which shall be used as a basis for the design of the logical structure of the SIM; - the security features; - the interface functions;

36、- the commands; - the contents of the files required for the GSM application; - the application protocol. Unless otherwise stated, references to GSM also apply to DCS 1800. This GTS does not specify any aspects related to the administrative management phase. Any internal technical realisation of eit

37、her the SIM or the ME are only specified where these reflect over the interface. This GTS does not specify any of the security algorithms which may be used. This GTS defines the SIM/ME interface for GSM Phase 2. While all attempts have been made to maintain phase compatibility, any issues that speci

38、fically relate to Phase 1 should be referenced from within the relevant Phase 1 specification. 2 Normative references This Global System for Mobile communications Technical Specification (GTS) incorporates, by dated or undated reference, provisions from other publications. These normative references

39、 are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to, or revisions of, any of these publications apply to this GTS only when incorporated in it by amendment or revision. For undated references, the latest edition o

40、f the publication referred to applies. 31 141 51 GSM O1 .O2 (ETR 99): “European digital cellular telecommunications system (Phase 2); General Description of a GSM PLMN“. GSM O1 .O4 (ETR 100): “European digital cellular telecommunications system (Phase 2); Abbreviations and acronyms“. GSM 02.07 (ETC

41、300 505): “European digital cellular telecommunications system (Phase 2); Mobile Station (MS) features“. GSM 02.09 (ETS 300 506): “European digital cellular telecommunications system (Phase 2); Security aspects“. GSM 02.1 1 (ETC 300 507): “European digital cellular telecommunications system (Phase 2

42、); Service accessibility“. Page 10 GSM 11.1 1 Version 5.0.0 December 1995 GSM 02.1 7 (ETS 300 509): “European digital cellular telecommunications system (Phase 2); Subscriber identity modules, functional characteristics“. i71 GSM 02.24 (ETS 300 510): “European digital cellular telecommunications sys

43、tem (Phase 2); Description of Charge Advice Information (CAI)“. GSM 02.30 (ETS 300 51 1): “European digital cellular telecommunications system (Phase 2); Man-Machine Interface (MMI) of the Mobile Station (MS)“. 91 GSM 02.86 (ETS 300 51 9): “European digital cellular telecommunications system (Phase

44、2); Advice of charge (AOC) supplementary services - Stage 1 “. GSM 03.20 (ETS 300 534): “European digital cellular telecommunications system (Phase 2); Security related network functions“. GSM 03.38 (ETS 300 628): “European digital cellular telecommunication system (Phase 2); Alphabets and language-

45、specific information“. GSM 03.40 (ETS 300 536): “European digital cellular telecommunications system (Phase 2); Technical realization of the Short Message (SMS) Service Point-to-Point (PP)“. GSM 03.41 (ETS 300 537): “European digital cellular telecommunications system (Phase 2); Technical realizatio

46、n of the Short Message Service Cell Broadcast (SMSCB)“. i 41 GSM 04.08 (ETS 300 557): “European digital cellular telecommunications system (Phase 2); Mobile radio interface Layer 3 specification“. 11 51 GSM 04.1 1 (ETS 300 559): “European digital cellular telecommunications system (Phase 2); Point t

47、o Point (PP) Short Message Service (SMS) support on mobile radio interface“. GSM 09.91 (ETR 174): “European digital cellular telecommunications system (Phase 2); Interworking aspects of the SIMME interface between Phase 1 and Phase 2“. CCITT Recommendation E.118: “The international telecommunication

48、 charge card“. i 71 CCIlT Recommendation E.164: “Numbering plan for the ISDN era“. CCITT Recommendation T.50: “International Alphabet No. 5“. (IS0 646: 1983, Information processing - IS0 7-bits coded characters set for information interchange). IS0 781 O (1 985): “Identification cards - Physical cha

49、racteristics“. IS0 7811-1 (1985): “Identification cards - Recording technique - Part 1: Embossing“. IS0 781 1-3 (1985): “Identification cards - Recording technique - Part 3: Location of embossed characters“. IS0 781 6-1 (1987): “Identification cards - Integrated circuit(s) cards with contacts, Part 1 : Physical characteristics“. IS0 781 6-2 (1 988): “Identification cards - Integrated circuit(s) cards with contacts, Part 2: Dimensions and locations of the contacts“. ISOAEC 781 6-3 (1 989): “Identification cards - Integrated circuit(s) cards with contacts,