ETSI TR 102 183-2002 Digital Enhanced Cordless Telecommunications (DECT) Conformance Testing on DECT equipment (V1 2 1)《数字增强无绳通信(DECT) 对DECT设备的一致性测试(版本1 2 1)》.pdf

1、ETSI TR 102 183 1.2.1 (2002-12) Technical Repor Digital Enhanced Cordless Telecommunications (DECT); Conformance testing on DECT equipment 2 ETSI TR 102 183 V1.2.1 (2002-12) Reference RTR/DECT-040189 Keywords DECT, testing ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33

2、 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made ava

3、ilable in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on

4、a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If

5、you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2002. All

6、rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members an

7、d of the 3GPP Organizational Partners. ETSI 3 ETSI TR 102 183 V1.2.1 (2002-12) Contents Intellectual Property Rights . . . . . .5 Foreword . 5 1 Scope 6 2 References . . . .6 3 Definitions and abbreviations. . .9 Definitions . .9 3.1 3.2 Abbreviations . . .9 4 4.1 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4

8、2.6 4.2.7 5 5.1 5.2 5.3 5.3.1 5.3.2 5.4 5.5 5.6 5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 5.6.6 Introduction to the DECT system and DECT standards 10 10 Protocol architecture 11 11 11 11 11 Network (NWK) layer 11 Lower Layer Management Entity (LLME) . 11 Inter-Working Units (IWU) 11 Overview on conformance tes

9、ting 12 Scope of conformance testing . . . .12 Importance and value of conformance testing. . 12 Benefits of a standard methodology and standard test specifications .12 A standardized methodology 13 Standardized test specifications . . 13 13 13 13 13 14 15 15 Information for Testing (IXIT) 15 What c

10、onformance assessment 16 General description of the system Data Link Control (DLC) layer What is the use of conformance testing 6 DECT testing 17 6.1 6.2 6.3 6.4 6.4.1 6.4.1.1 6.4.1.2 6.4.1.3 6.4.1.4 6.4.1.5 6.4.1.6 6.4.1.7 6.4.1.8 6.4.2 6.4.2.1 6.4.2.2 6.4.2.3 6.4.2.4 6.4.2.5 - Scope of testing 17

11、DECT Test Specification for R Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the rea

12、der to the above source of information. Foreword This Technical Report (TR) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). ETSI 6 ETSI TR 102 183 V1.2.1 (2002-12) 1 Scope The present document attempts to provide an introduction in DECT testing. It gives a gene

13、ral overview on the DECT system, an introduction on testing and DECT testing in particular. It further shows how an ETSI customer can use the DECT test standards. The present document contains an abstract of the DECT standard, the ISO/IEC 9646 56 to 62 standard and the resulting issues from applying

14、 the requirements and techniques of ISO/IEC 9646 on the DECT protocol stack, together with a set of examples derived from the currently available test specification material from the Test suites for different DECT layers. The present document is not an overall description of DECT system concepts for

15、 which reference should be made to the relevant DECT standard documents, neither a guidance in testing methodology and framework, for which reference should be made to ISO/IEC 9646 documents. It is outside the scope of the present document to defie specific equipment or particular implementation of

16、such a product intended to realize the considered ATSs for DECT testing. 2 Re fe re nces For the purposes of this Technical Report (TR) the following references apply: il Directive 99/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications termina

17、l equipment and the mutual recognition of their conformity (R A High Level Guide to the DECT Standardization“. ETSI EN 300 175-1 : “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1 : Overview“. ETSI EN 300 175-2: “Digital Enhanced Cordless Telecommunications (DECT);

18、 Common Interface (CI); Part 2: Physical Layer (PHL)“. ETSI EN 300 175-3 : “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4:

19、Data Link Control (DLC) layer“. ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. ETSI EN 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and Addressing“. ETSI EN 30

20、0 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. ETSI EN 300 175-8: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission“. ETSI 7 ETSI TR 102 183 V1.2.1 (2002-12) ETSI EN 3

21、00 176-1 : “Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1 : Radio“. ETSI EN 300 176-2: “Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 2: Speech“. ETSI EN 300 370: “Digital Enhanced Cordless Telecommunications (DECT);

22、 Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP); Access and mapping (protocoVprocedure description for 3,l kHz speech service)“. ETSI EN 300 434 (all parts): “Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN); DECT/ISDN

23、 interworking for end system configuration“. ETSI EN 300 444: “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP)“. ETSI EN 300 466: “Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP)

24、 General description of service requirements; Functional capabilities and information flows“. ETSI EN 300 474 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile requirement list and profile specific Implementation Conformance Statement (IC S) pr

25、oforma“. ETSI EN 300 476 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma“. ETSI EN 300 494 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile

26、Test Specification (PTS)“. ETSI EN 300 497 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL)“. ETSI EN 301 614 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN inte

27、rworking for intermediate system configuration“. ETSI EN 300 757: “Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)“. ETSI EN 300 822: “Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Netwo

28、rk (ISDN); DECT/ISDN interworking for intermediate system configuration; Interworking and profile specification“. ETSI EN 301 238: “Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class

29、 2)“. ETSI EN 301 241 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS)“. ETSI EN 301 242: “Digital Enhanced Cordless Telecomm

30、unications (DECT); Global System for Mobile communications (GSM); DECT/GSM integration based on dual-mode terminals“. ETSI EN 30 1 406: “Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering essential requirements under ar

31、ticle 3.2 of the R Generic radio“. ETSI EN 301 439: “Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); Attachment requirements for DECT/GSM dual-mode terminal equipment“. ETSI EN 30 1 440: “Digital Enhanced Cordless Telecommunications (DECT); Integra

32、ted Services Digital Network (ISDN); Attachment requirements for terminal equipment for DECT/ISDN interworking profile applications“. ETSI 8 ETSI TR 102 183 V1.2.1 (2002-12) i321 i331 i341 i351 i3 61 i371 i3 81 i3 91 i401 i411 i421 i43 1 i441 i451 i461 i471 i481 i491 ETSI EN 301 469 (all parts): “Di

33、gital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL)“. ETSI EN 301 489-6: “Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions

34、 for Digital Enhanced Cordless Telecommunications (DECT) equipment“. ETSI EN 30 1 649: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS)“. ETSI EN 30 1 650: “Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application S

35、pecific Access Profile (ASAP)“. ETSI TS 101 859 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP); Profile Test Specification (PTS)“. ETSI TS 101 869 (all parts): “Digital Enhanced Cordless Telecommuni

36、cations (DECT); DECT Packet Radio Services (DPRS); Profile requirement list and profile specific Implementation Conformance Statement (ICs) proforma“. ETSI TS 101 871 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Application Specific Access Profile (ASAP); DECT Multimedia Access

37、 Profile (DMAP); Profile requirement list and profile specific Implementation Conformance Statement (ICs) proforma“. ETSI TS 101 942: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): Ethernet (Eth) Interworking“. ETSI

38、 TS 101 945 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming capability (Service Type D, mobility class 2); Profile requirement list and profile specific Implementation Conformance Statement (IC S) proforma“

39、 ETSI TS 101 946 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Low Rate Messaging Service (LMRS) including Short Message Service (SMS); Profile requirement list and profile specific Implementation Conformance Statement (ICs) proforma“. ETSI TS 101 947: “Digital Enhanced Cordles

40、s Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking“. ETSI TS 101 950: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Interoperability Test Specification“. ETSI TS 102 O1 1 (all parts):

41、Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): V.24 Intenvorking; Profile Implementation Conformance Statement (ICS)“. ETSI TS 102 012: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service

42、 (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking; Profile Test Specification (PTS)“. ETSI TS 102 013 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): Ethernet Intenvorking; Profile I

43、mplementation Conformance Statement (ICS)“. ETSI TS 102 014: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): Ethernet Interworking; Profile Test Specification (PTS)“. ETSI ETS 300 33 1 : “Digital Enhanced Cordless Te

44、lecommunications (DECT); DECT Authentication Module (DAM)“. ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ETSI 9 ETSI TR 102 183 V1.2.1 (2002-12) ETSI ETS 300 704 (all parts): “Digital Enhanced C

45、ordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Intenvorking Profile (IWP); Profile Implementation Conformance Statement (ICS)“. ETSI ETS 300 705 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN);

46、DECT/ISDN interworking for end system configuration; Profile Implementation Conformance Statement (ICS)“. ETSI ETS 300 758 (all parts): “Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Test

47、Specification (PTS)“. ETSI ETS 300 759: “Digital Enhanced Cordless Telecommunications (DECT); DECT Authentication Module (DAM); Test specification for DAM“. ETSI ETS 300 760: “Digital Enhanced Cordless Telecommunications (DECT); DECT Authentication Module (DAM); Implementation Conformance Statement

48、ICs) proforma specification“. ETSI ETS 300 825: “Digital Enhanced Cordless Telecommunications (DECT); 3 Volt DECT Authentication Module (DAM)“. ISO/IEC 9646- 1 : “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1 : General concepts“. ISO/

49、IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. ISO/IEC 9646-3 : “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTC