ETSI TR 102 187-2003 Satellite Earth Stations and Systems (SES) Broadband Satellite Multimedia Overview of BSM families (V1 1 1)《卫星地面站和系统(SES) 宽带卫星多媒体 BSM系列的概述(版本1 1 1)》.pdf

1、ETSI TR 102 I87 1.1.1 (2003-05) Technical Repor Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia; Overview of BSM families 2 ETSI TR 102 187 VI .I .I (2003-05) Reference DTR/SES-00084 Keywords air interface, broadband, interworking, multimedia, satellite ETSI 650 Route des

2、Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from

3、: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be

4、 the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available

5、at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O

6、European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade

7、 Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI TR 102 187 VI . 1 . 1 (2003-05) Contents Intellectual Property Rights 4 Introduction 4 1 Scope 5 2 References 5 3 Definitions and abbreviations . 5 3.1 Definitions . . . 5 3.2 Abbreviatio . .

8、 5 4 4.1 Family names 4.2 Reference points Foreword . 4 Families of BSM systems . 5 History 8 . 5 . 7 ETSI 4 ETSI TR 102 187 VI .I .I (2003-05) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to t

9、hese essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest

10、 updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). I n

11、t rod uct ion Broadband Satellite Multimedia (BSM) existing and planned systems 11 and 2 will provide consumers in corporate, public and home environments broadband access to the Internet and to multimedia applications. Broadband Satellite Multimedia access systems are intended as high performance,

12、quick to set up, competitive alternatives for wire-based access systems particularly in the geographical areas where it will not be economically viable to deploy, for instance, xDSL networks. Broadband Satellite Multimedia systems inter-work with several core networks typically based on MPLS, ATM, o

13、r IP. They operate in the frequency spectrum allocated to Fixed Satellite Services (FSS). ETSI 5 ETSI TR 102 187 VI .I .I (2003-05) 1 Scope The present document has been produced by ETSI Technical Committee Satellite Earth stations and Systems (TC SES). It provides the definitions of the Family Name

14、s of Broadband Satellite Multimedia (BSM). 2 Re fe re nces For the purposes of this Technical Report (TR) the following references apply: il ETSI TR 101 374-1: “Satellite Earth Stations and Systems (SES); Broadband satellite multimedia; Part 1 : Survey on standardization objectives“. ETSI TR 101 374

15、-2: “Satellite Earth Stations and Systems (SES); Broadband satellite multimedia; Part 2: Scenario for standardization“. 21 31 ETSI TR 101 984: “Satellite Earth Stations and Systems (SES); Broadband satellite multimedia; Services and Architectures“. 3 Definitions and abbreviations 3.1 De fi nit ions

16、For the purposes of the present document, the following terms and definitions apply: Satellite Access Function (SAP): logical function that provides interworking between the BSM bearer service and an End System, either directly or via a local network (e.g. a LAN) Satellite Gateway Function (SGF): lo

17、gical function that provides interworking between the BSM bearer services and a core network, either directly or via a transit network 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: BSM Broadband Satellite Multimedia FSS Fixed Satellite Services SAF Sa

18、tellite Access Function SGF Satellite Gateway Function 4 Families of BSM systems 4.1 Family names To ensure that a Technical Specification can be re-used by various systems, it is required to class them under families to maximize the commonalties between them. This will also facilitate, when appropr

19、iate, not only interoperability between these systems or between components of these systems within a same family but also between systems that are members of different families. Different families are expected to refer to different satellite networks including both Star and Mesh network topologies

20、and including regenerative and transparent satellites. Some may only provide forward and return channels over satellite (Satellite) when others may use an optional terrestrial return path (Hybrid). These main alternatives are summarized in the following table which also defines the 3-letter prefix (

21、1-2-3) that will be used to designate these families. ETSI 6 ETSI TR 102 187 VI .I .I (2003-05) PREFIX MEANING 1 - SATELLITE TYPE -2- RETURN CHANNEL -3 TOPOLOGY Table 1: Family names - definition of the prefix DEFINITION OF THE PREFIX R = Regenerative (OBP); or T = Transparent (bent pipe) S = Satell

22、ite; or H = Hybrid M = Mesh; or FAM I LY CODES (see note) THS-x TSS-x TSM-x RSM-x IS = Star DEFINITION Transparent satellite Hybrid (1- way satellite channel) Optional terrestrial return path Star connectivity Transparent satellite Satellite Return channel Star connectivity Transparent satellite Sat

23、ellite Return channel Mesh connectivity Regenerative Satellite Satellite Return channel Mesh connectivity Recognizing that in a given family there may be several different implementations, a suffix letter (-x) will be used to differentiate them. Therefore the following families are identified: Table

24、 2: Family names - full designation ETSI 7 ETSI TR 102 187 VI .I .I (2003-05) 4.2 Reference points According to the reference model for BSM access systems defined in TR 101 984 3 these common functional requirements are defined at the following interfaces: Figure 1 : References points for common fun

25、ctional requirements These interfaces are defined in the BSM Services and Architectures 3 as follows: 1.2 is the BSM Network Interface; the interface between satellite access function and the customer premises networks; I.5D.6 are the Air interfaces; 1.10 is the BSM Gateway Interface; the interface between the satellite gateway function and terrestrial networks. ETSI 8 ETSI TR 102 187 VI .I .I (2003-05) vl.l.l History May 2003 Publication ETSI