ETSI TR 102 200-2003 Methods for Testing and Specification (MTS) UMTS Testing Methodology (V1 1 1)《测试方法和规范(MTS) UMTS测试方法(版本1 1 1)》.pdf

1、 ETSI TR 102 200 V1.1.1 (2003-07)Technical Report Methods for Testing and Specification (MTS);UMTS Testing MethodologyETSI ETSI TR 102 200 V1.1.1 (2003-07) 2 Reference DTR/MTS-00082 Keywords UMTS, NIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +3

2、3 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one e

3、lectronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive

4、within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present doc

5、ument, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM,

6、 PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizat

7、ional Partners. ETSI ETSI TR 102 200 V1.1.1 (2003-07) 3 Contents Intellectual Property Rights4 Foreword.4 1 Scope 5 2 References 5 3 Abbreviations .7 4 General description.9 4.1 Reasons for a UMTS testing methodology.9 4.2 Why should be used NIT technique .9 4.3 Standard network configuration .10 5

8、UMTS network suppliers contribution.10 6 UMTS Testing Methodology .11 6.1 End-to-end approach 11 7 Methodology Validation.14 Annex A: TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are availab

9、le on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web serve

10、r) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Methods for Testing and Specification (MTS). TRs are informative documents resulting from ETSI studies which are not appropriate for European N

11、orms (ENs). A TR may be used to publish material which is either of an informative nature or which is immature and not yet suitable for formal adoption as EN. ETSI ETSI TR 102 200 V1.1.1 (2003-07) 5 1 Scope The present document describes UMTS Network Integration Testing (NIT) methodology and TSS Uni

12、versal Mobile Telecommunications System (UMTS); Mobile radio interface Layer 3 specification; Core network protocols; Stage 3 (3GPP TS 24.008 version 3.14.0 Release 1999)“. 2 ETSI TS 123 121 (V3.6.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System

13、UMTS); Architecture Requirements for release 99 (3GPP TS 23.121 version 3.6.0 Release 1999)“. 3 ETSI TS 123 060 (V3.14.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS) Service description; Stage 2 (3GP

14、P TS 23.060 version 3.14.0 Release 1999)“. 4 ETSI TS 129 002 (V3.15.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Mobile Application Part (MAP) specification (3GPP TS 29.002 version 3.15.0 Release 1999)“. 5 ETSI TS 133 102 (V3.13.0): “

15、Universal Mobile Telecommunications System (UMTS); 3G security; Security architecture (3GPP TS 33.102 version 3.13.0 Release 1999)“. 6 ETSI TS 123 009 (V3.12.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Handover procedures (3GPP TS 23

16、009 version 3.12.0 Release 1999)“. 7 ETSI TS 129 060 (V3.15.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS); GPRS Tunnelling Protocol (GTP) across the Gn and Gp interface (3GPP TS 29.060 version 3.15.

17、0 Release 1999)“. 8 ETSI TS 129 061 (V3.11.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Interworking between the Public Land Mobile Network (PLMN) supporting Packet Based services and Packet Data Networks (PDN) (3GPP TS 29.061 version

18、 3.11.0 Release 1999)“. 9 ETSI TS 124 081 (V3.1.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Line identification supplementary services - Stage 3 (3G TS 24.081 version 3.1.0 Release 1999)“. 10 ETSI TS 123 081: “Digital cellular

19、telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Line Identification supplementary services; Stage 2 (3GPP TS 23.081 version 3.2.0 Release 1999)“. 11 ETSI TS 123 082 (V3.7.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommuni

20、cations System (UMTS); Call Forwarding (CF) Supplementary Services; Stage 2 (3GPP TS 23.082 version 3.7.0 Release 1999)“. 12 ETSI TS 123 083 (V3.2.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Hold (HOL

21、D) supplementary services - Stage 2 (3GPP TS 23.083 version 3.2.0 Release 1999)“. 13 ETSI TS 123 084 (V3.2.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Multi Party (MPTY) supplementary services - Stage 2 (3GPP TS 23.084 version

22、3.2.0 Release 1999)“. ETSI ETSI TR 102 200 V1.1.1 (2003-07) 6 14 ETSI TS 100 941 (V7.0.1): “Digital cellular telecommunications system (Phase 2+) (GSM); Mobile radio interface layer 3 Supplementary services specification; General aspects (GSM 04.10 version 7.0.1 Release 1998)“. 15 ETSI TS 123 088 (V

23、3.2.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Barring (CB) Supplementary Services - Stage 2 (3GPP TS 23.088 version 3.2.0 Release 1999)“. 16 ETSI TS 123 040 (V3.9.0): “Digital cellular telecommunications system (Phase 2+

24、); Universal Mobile Telecommunications System (UMTS); Technical realization of Short Message Service (SMS) (3GPP TS 23.040 version 3.9.0 Release 1999)“. 17 ETSI TS 132 015 (V3.10.0): “Universal Mobile Telecommunications System (UMTS); Telecommunications Management; Charging and billing; 3G call and

25、event data for the Packet Switched (PS) domain (3GPP TS 32.015 version 3.10.0 Release 1999)“. 18 ETSI TS 129 007 (V3.11.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); General requirements on interworking between the Public Land Mobile N

26、etwork (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN) (3GPP TS 29.007 version 3.11.0 Release 1999)“. 19 ETSI TS 123 018 (V3.11.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); B

27、asic call handling; Technical realization (3GPP TS 23.018 version 3.11.0 Release 1999)“. 20 ITU-T Recommendation Q.763 (1999): “Signalling System No.7 - ISDN user part format and codes“. 21 ETSI ETS 300 102-1: “Integrated Services Digital Network (ISDN); User-network interface layer 3; Specification

28、s for basic call control“. 22 ETSI TS 124 087 (V3.0.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); User-to-User Signalling (UUS) Supplementary Service - Stage3 (3G TS 24.087 version 3.0.0 Release 1999)“. 23 ETSI TS 123 087 (V3.1.0

29、): “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); User-to-user signalling (UUS) Supplementary Service - Stage 2 (3GPP TS 23.087 version 3.1.0 Release 1999)“. 24 ETSI TS 129 018 (V3.10.0): “Digital cellular telecommunications system (P

30、hase 2+); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS); Serving GPRS Support Node (SGSN) - Visitors Location Register (VLR); Gs interface layer 3 specification (3GPP TS 29.018 version 3.10.0 Release 1999)“. 25 ETSI TS 125 413 (V3.12.0): “Universal Mobile Tel

31、ecommunications System (UMTS); UTRAN Iu interface RANAP signalling (3GPP TS 25.413 version 3.12.0 Release 1999)“. 26 ETSI ETR 193 (1995): “Methods for testing and Specification (MTS); Network Integration Testing (NIT); Methodology aspects; Test Co-ordination Procedure (TCP) style guide“. 27 ETSI TS

32、102 110-1 (V1.1.1): “Services and Protocols for Advanced Networks (SPAN); Network integration testing of Universal Mobile Telecommunications System (UMTS) with Global System for Mobile Communication (GSM) Phase 2+, Public Switched Telephone Network (PTSN) and Integrated Services Digital Network (ISD

33、N); Part 1: Test Suite Structure and Test Purposes (TSS Network integration testing of Universal Mobile Telecommunications System (UMTS) with Global System for Mobile Communication (GSM) Phase 2+, Public Switched Telephone Network (PSTN) and Integrated Services Digital Network (ISDN) Part 2: Abstrac

34、t Test Suite (ATS) and Partial Implementation eXtra Information for Testing (PIXIT) proforma“. 29 ETSI EN 300 356-1 (V4.2.1): “Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 4 for the international interface; Part 1: Basic services ITU-T Recom

35、mendations Q.761 to Q.764 (1999) modified“. ETSI ETSI TR 102 200 V1.1.1 (2003-07) 7 30 G. Maggiore, G. Brusasco, M. Vecchiato, “Network integration testing: concepts, test specifications and tools for automatic Telecommunication services verification“, Computer Networks 34 (2000) pp 799 - 819. 31 ET

36、SI TS 123 002: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Network architecture (3GPP TS 23.002 version 3.5.0 Release 1999)“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: APN Access P

37、oint Name ATP Access Transport Parameter BC Bearer Capability BSC Base Station Controller BSS Base Station Sub-system CB Call Barring CDR Call Data Record CF Call ForwardingCFB Call Forwarding on Busy subscriber CFNRc Call Forwarding on No Reachable CFNRy Call Forwarding on No Replay CFU Call Forwar

38、ding Unconditional CLIP Calling Line Identification Presentation CLIR Calling Line Identification Restriction COLP Connected Line Identification Presentation COLR Connected Line Identification Restriction CoNC Cause of No Cli CS Circuit Switched CW Call WaitingDHCP Dynamic Host Configuration Protoco

39、l DNS Domain Name Server/System ETSI European Telecommunications Standards Institute FAX G3 Facsimile Group 3 FTP File Transfer Protocol 3G-GGSN Third Generation-Gateway GPRS Support Node GMM GPRS Mobility Management GMSC Gateway Mobile Switching Centre 3G-GMSC Third Generation-Gateway Mobile Switch

40、ing Centre GPRS General Packet Radio Service GSM Global System for Mobile Communications 3G-GSN Third Generation-GPRS Support Node GTP GPRS Tunnelling Protocol HLC High Layer Capability HLR Home Location Register HTTP HyperText Transport Protocol ID Identity or Identifier IMSI International Mobile S

41、ubscriber Identity ISDN Integrated Services Digital Network L2TP Layer Two Tunnelling Protocol LA Location Area LAI Location Area Identity LLC Logical Link Control LLC Low Layer CapabilityLM-CDR Land Mobile Call Data Record ME Mobile Equipment ML-CDR Mobile Land Call Data Record MM Mobility Manageme

42、nt MO Mobile OriginatedETSI ETSI TR 102 200 V1.1.1 (2003-07) 8 MOS Mean Opinion Score MPTY Multy Party MS Mobile StationMSC Mobile Switching Centre 3G-MSC Third Generation-Mobile Switching Centre MT Mobile Terminated NDUB Network Determined User Busy NIT Network Integration Testing PAMS Perceptual A

43、nalysis Measurement System PDN Packet Data Network PDP Packet Data Protocol PDPC PDP Context PDU Protocol Data Unit PESQ Perceptual Evaluation of Speech Quality PLMN Public Land Mobile Network PTMSI Packet Temporary Mobile Subscriber Identity PS Packet Switched PSQM Perceptual Speech Quality Measure

44、ment PSTN Public Switched Telephone Network QoS Quality of Service RA Routing Area RAI Routing Area Identity SGSN Serving GPRS Support Node 3G-SGSN Third Generation-Serving GPRS Support Node SM Session Management SMS Short Message Service SMS-IWMSC SMS-InterWorking Mobile Switching Centre SUB SUB-ad

45、dressing TE Terminal Equipment TEID Tunnel Endpoint IDentifier TCP Transmission Control Protocol TMSI Temporary Mobile Subscriber Identity TOL Test Object List TSS execution of procedure: phase in which the procedure to test the various functions is carried out by operating on the terminal and MS, a

46、s well as on the network elements; result verification: phase (overlapping with the previous one) to verify procedural correctness by monitoring the interfaces with appropriate instruments and logging network elements. Functional tests Except for the last group, the tests in the present document are

47、 functional, that is to say aimed at verifying the systems functionality described in the present document. The result verification phase essentially consists in analysing the messages exchanged on the interfaces involved and checking the effects obtained on the elements concerned. Each test is pass

48、ed if they give the desired effects and if the messages exchanged are compliant with the service specifications. For failed tests, the severity of the problem should be assessed in relation to the consequences for both the user and the network. For example, a basic Mobility Management test includes:

49、 1) preparation: HLR configuration of a UMTS subscription for the user whose USIM is inserted in the terminal; 2) execution: switching on the MS; 3) verification: checking messages exchanged on IuCS and D with protocol analyser, checking variations to MS, 3G-MSC and HLR status. MS Node B RNC 3G MSC HLR IuCS D Execution Checking Preparation Figure 3: Example of Mobility Management test case Quality of Service Test Cases This Test list is intended mainly in a functional sense, however a number of tests have been incl