ETSI TR 102 277-2007 Satellite Earth Stations and Systems (SES) Satellite Component of UMTS IMT-2000 W-CDMA Radio Interface for Multimedia Broadcast Multicast Service (MBMS) (V1 2 _1.pdf

1、 ETSI TR 102 277 V1.2.1 (2007-02)Technical Report Satellite Earth Stations and Systems (SES);Satellite Component of UMTS/IMT-2000;W-CDMA Radio Interface forMultimedia Broadcast/Multicast Service (MBMS)ETSI ETSI TR 102 277 V1.2.1 (2007-02) 2 Reference RTR/SES-00284 Keywords IMT-2000, radio, satellite

2、, UMTS, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present

3、document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of d

4、ispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and othe

5、r ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by

6、written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON log

7、o are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 102 277 V1.2.1 (2007-02) 3 Contents Intellectual Property Rights7 Foreword.7 Introductio

8、n 7 1 Scope 9 2 References 9 3 Definitions, symbols and abbreviations .11 3.1 Definitions11 3.2 Symbols11 3.3 Abbreviations .12 4 Satellite Multimedia Broadcast/Multicast Service .13 4.1 System architecture 13 4.2 Frequency bands.14 4.2.1 Service link .14 4.2.2 Feeder links.15 4.3 Satellite system c

9、onfiguration 15 4.3.1 Global beam architecture 16 4.3.2 Multi-beam architecture17 4.3.3 Extended multi-beam architecture 17 4.3.4 Multi-satellite/multi-beam architecture.17 4.4 User Equipment17 4.5 Intermediate Module Repeaters (IMR).18 5 W-CDMA Satellite Radio Interface (SRI) .19 5.1 General descri

10、ption.19 5.1.1 S-UMTS Interface G key features for satellite MBMS.19 5.1.2 Key technical characteristics.19 5.1.3 Radio interface protocol architecture20 5.2 Channel structure20 5.2.1 Logical channels .20 5.2.2 Transport channels21 5.2.3 Physical channels and signals .21 5.2.4 Logical to transport c

11、hannels mapping .21 5.2.5 Mapping and association of physical channels .22 5.3 Physical channel structure 22 5.3.1 Common Pilot Channel (CPICH) .22 5.3.1.1 Primary Common Pilot Channel (P-CPICH) 23 5.3.1.2 Secondary Common Pilot Channel (S-CPICH) 23 5.3.2 Synchronization Channel (SCH).23 5.3.3 Prima

12、ry Common Control Physical Channel (P-CCPCH)24 5.3.4 Secondary Common Control Physical Channel (S-CCPCH)24 5.3.5 Paging Indicator Channel (PICH).25 5.3.6 MBMS Indicator Channel (MICH).26 5.3.7 Code allocation .27 5.3.7.1 Scrambling codes 27 5.3.7.2 Synchronization codes 28 5.3.7.3 Channelization cod

13、es 28 5.4 Channel coding and service multiplexing 28 5.4.1 Channel coding/interleaving for user services 28 5.4.1.1 CRC attachment 29 5.4.1.2 Transport block concatenation and code block segmentation.29 5.4.1.3 Channel coding .29 5.4.1.4 Radio frame size equalization .29 5.4.1.5 Radio frame segmenta

14、tion.29 5.4.1.6 TrCH multiplexing30 ETSI ETSI TR 102 277 V1.2.1 (2007-02) 4 5.4.1.7 Insertion of Discontinuous Transmission (DTX) indication bits 30 5.4.1.8 Outer coding/interleaving30 5.4.1.9 Rate matching .30 5.5 Radio resource functions 30 5.5.1 Initial spot/cell search .30 5.5.1.1 Step 1: Slot s

15、ynchronization30 5.5.1.2 Step 2: Frame synchronization and code-group identification31 5.5.1.3 Step 3: Scrambling-code identification .31 5.5.2 Radio resource allocation31 5.5.2.1 Channelization codes 31 5.5.2.2 Scrambling code31 5.5.2.3 IMR frequency and codes .31 5.5.3 Power control/balancing .32

16、5.5.4 Handover 32 5.5.4.1 Intra-frequency handover 32 5.5.4.1.1 Selective/Soft Combining32 5.5.4.1.2 Softer combining .33 5.5.4.2 Inter-frequency handover 33 5.5.4.2.1 Dual-receiver .33 5.5.4.2.2 Slotted downlink transmission.33 5.5.5 UE energy saving optimization.34 5.5.6 Support of TDD 34 6 Perfor

17、mance requirements34 6.1 Test environment support.34 6.1.1 Satellite environment 34 6.1.2 Intermediate Module Repeater environment (IMR) .35 6.1.3 Combined satellite and transparent IMR environment .35 6.1.4 Aeronautical environment.37 6.2 Expected performances 37 6.2.1 Summary of test measurement s

18、ervices 37 6.2.2 FACH demodulation requirements .38 6.2.2.1 Demodulation in static conditions.38 6.2.2.2 Demodulation in ITU Channel model A conditions38 6.2.2.3 Demodulation in ITU Channel model B conditions39 6.2.2.4 Demodulation in ITU Channel model C conditions40 6.2.2.5 Demodulation in IMR envi

19、ronment conditions.41 6.2.2.6 Demodulation in combined satellite and transparent IMR environment conditions .42 6.2.2.7 Demodulation in combined satellite and regenerative IMR environment conditions .43 6.2.2.8 Demodulation in aeronautical environment 43 6.2.3 Demodulation requirements synthesis 43

20、6.2.3.1 Fast fading propagation link margin .43 6.2.3.1.1 Satellite signal LOS view 43 6.2.3.1.2 Satellite signal NLOS view .44 6.2.3.1.3 Shadowing margin.44 6.2.3.2 Increasing interleaving depth 44 6.2.3.3 Spatial diversity.45 6.2.3.3.1 UE antenna diversity .45 6.2.3.3.2 Satellite diversity.45 6.2.

21、4 Acquisition efficiency.46 6.3 Satellite transmitter characteristics.48 6.4 UE receiver characteristics.49 6.5 IMR transmitter characteristics 50 7 System performances .50 7.1 Link budgets.50 7.1.1 Audio service 8 kbps.52 7.1.2 Data service 64 kbps.53 7.1.3 Data service 128 kbps.54 7.1.4 Data servi

22、ce 256 kbps.55 7.1.5 Data service 384 kbps.56 7.2 System capacity56 ETSI ETSI TR 102 277 V1.2.1 (2007-02) 5 7.2.1 Orthogonality factor57 7.2.2 Rural environment with shadowing 57 7.2.3 Rural environment with constant LOS view of the satellite .58 7.2.4 Combined satellite and IMR environment 58 7.2.5

23、 Hierarchical services structure59 8 Technology design constraints .59 8.1 Doppler frequency shift59 8.1.1 Doppler shift due to satellite movement .59 8.1.2 Doppler shift due to UE movement 59 8.2 Interoperability.60 8.2.1 Dual mode UEs.60 8.2.2 Intermediate Module Repeaters (IMR).60 8.2.3 Inter-sys

24、tem handover.60 8.2.4 Compatibility with existing systems.60 8.3 Performance enhancement features60 8.4 System flexibility .61 9 Conclusion61 Annex A: Downlink reference measurement channels.62 A.1 Audio 8 kbps service62 A.2 Data 64 kbps service.63 A.3 Data 128 kbps service.64 A.4 Data 256 kbps serv

25、ice.65 A.5 Data 384 kbps service.66 Annex B: Comparison of S-MBMS performance and system radio capacity with and without soft combining in IMR environment .67 B.1 Introduction 67 B.2 References 67 B.3 3GPP Radio Resource Management 67 B.3.1 Downlink code allocation.68 B.3.2 Macro-diversity 69 B.4 Pr

26、opagation.69 B.4.1 Multi-path diversity69 B.4.2 Impact on code orthogonality.70 B.4.3 Impact on system capacity71 B.5 3GPP User Equipment Capabilities .71 B.5.1 Rake Receiver 71 B.5.2 Multi-path combining: multi-path diversity .71 B.5.2.1 Multi-code combining: macro-diversity .72 B.5.3 Capabilities

27、for MBMS (current status: Release 6)72 B.5.3.1 S-CCPCH Combining.72 B.5.3.2 Synchronisation constraints 73 B.6 Intermediate Module Repeater (IMR)73 B.6.1 Transparent IMR 74 B.6.2 Regenerative IMR (non-transparent IMR) .74 B.7 Performance requirements and system capacity.74 B.7.1 Test environment74 B

28、.7.2 Data service 16 kbps.76 B.7.3 Data service 32 kbps.78 B.7.4 Data service 64 kbps.79 B.7.5 Data service 128 kbps.80 ETSI ETSI TR 102 277 V1.2.1 (2007-02) 6 B.8 Conclusion81 Annex C: Propagation Channels 83 C.1 ITU Satellite channels 83 C.2 Combined satellite and IMR channels84 C.3 Terrestrial IT

29、U channels.85 Annex D: Performance with increased number of Rake fingers .86 History 87 ETSI ETSI TR 102 277 V1.2.1 (2007-02) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential I

30、PRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are a

31、vailable on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

32、 server) which are, or may be, or may become, essential to the present document. Foreword The present Technical Report (TR) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). Introduction The objective of W-CDMA Satellite Radio Interface is to ease integration

33、of satellite and terrestrial UMTS. One promising application is provision of Multimedia Broadcast/Multicast Service (MBMS). Some of the benefits to be gained from a fully integrated S-UMTS/T-UMTS system are: seamless service provision; highly integrated multi-mode terrestrial/satellite User Equipmen

34、t (UE); reuse of terrestrial equipment: radio access infrastructure equipment (RNC, Node B, etc.). The satellite component of MBMS may provide services: in areas covered by cellular terrestrial systems, for complementary services such as broadcast/multicast; in areas where terrestrial coverage is no

35、t available: - because terrestrial network have not been deployed for business attractiveness reasons; or - because terrestrial infrastructure has suffered environmental damages (crisis conditions). The present document is applicable to several satellite constellation types (for LEO and MEO constell

36、ations, addition of Doppler and synchronization adaptation module). The outline of the present document is the following: Clause 4: “Satellite Multimedia Broadcast/Multicast Service“, the system architecture and candidate satellite constellations are presented. Clause 5: “W-CDMA Satellite Radio Inte

37、rface“ summarizes key characteristics based on the Technical Specifications defined by 3GPP. Clause 6 specifies test environment and equipment performance requirements. Clause 7: “System performances“ presents link budgets and system capacity. ETSI ETSI TR 102 277 V1.2.1 (2007-02) 8 Clause 8: “Techn

38、ology design constraints“ summarizes constraints due to satellite environment. The concluding clause 9 “Conclusion“ is a brief summary of the results established so far. The present document is completed with four annexes. Annex A specifies reference measurement channels. Annexes B, C and D present

39、Comparison of S-MBMS performance and system radio capacity with and without soft combining in IMR environment. ETSI ETSI TR 102 277 V1.2.1 (2007-02) 9 1 Scope The feasibility of using W-CDMA UTRA FDD as a satellite radio interface has been shown in ETSI TR 102 058 6. Based on this, ITU has adopted t

40、his radio interface as G family in ITU-Rec M 1455 3 and ITU-Rec M 1457 4. This radio interface has been standardized within the TC SES S-UMTS working group as family G in TS 101 851-1 to 4 7 to 10. The present document evaluates the feasibility to use S-UMTS interface G (W-CDMA UTRA FDD) for provisi

41、on of Satellite Multimedia Broadcast/Multicast Service (S-MBMS). The Technical Specifications for the W-CDMA UTRA FDD has been developed in the framework of the third Generation Partnership project (3GPP). The analysis for applicability to satellite is based on 3GPP standards as defined from 11 to 2

42、9. 2 References For the purposes of this Technical Report (TR), the following references apply: 1 ETSI TR 101 865: “Satellite Earth Stations and Systems (SES); Satellite component of UMTS/IMT-2000; General aspects and principles“. 2 ITU-R Recommendation M.1225: “Guidelines for evaluation of Radio Tr

43、ansmission technology for IMT-2000“. 3 ITU-R Recommendation M.1455: “Key characteristics for the International Mobile Telecommunications-2000 (IMT-2000) radio interfaces“. 4 ITU-R Recommendation M.1457: “Detailed specifications of the radio interfaces of the International Mobile Telecommunications-2

44、000 (IMT-2000)“. 5 ITU-R Recommendation M.1034-1: “Requirements for the radio interface(s) for International Mobile Telecommunications-2000 (IMT-2000)“. 6 ETSI TR 102 058: “Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Evaluation of the W-CDMA UTRA FDD as a Satell

45、ite Radio Interface“. 7 ETSI TS 101 851-1: “Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 1: Physical channels and mapping of transport channels into physical channels (S-UMTS-A 25.211)“. 8 ETSI TS 101 851-2: “Satellite Earth Stations and Systems (SE

46、S); Satellite Component of UMTS/IMT2000; G-family; Part 2: Multiplexing and channel coding (S-UMTS-A 25.212)“. 9 ETSI TS 101 851-3: “Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 3: Spreading and modulation (S-UMTS-A 25.213)“. 10 ETSI TS 101 851-4: “

47、Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 4: Physical layer procedures (S-UMTS-A 25.214)“. 11 ETSI TS 125 101: “Universal Mobile Telecommunications System (UMTS); User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101)“. 12 ET

48、SI TS 125 104: “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104)“. 13 ETSI TS 125 201: “Universal Mobile Telecommunications System (UMTS); Physical layer - general description (3GPP TS 25.201)“. 14 ETSI TS 125 301: “Universa

49、l Mobile Telecommunications System (UMTS); Radio interface protocol architecture (3GPP TS 25.301)“. ETSI ETSI TR 102 277 V1.2.1 (2007-02) 1015 ETSI TS 125 302: “Universal Mobile Telecommunications System (UMTS); Services provided by the physical layer (3GPP TS 25.302)“. 16 ETSI TS 125 321: “Universal Mobile Telecommunications System (UMTS); Medium Access Control (MAC) protocol specification (3GPP TS 25.321)“. 17 ETSI TS 125 322: “Universal Mobile Telecommunications System (UMTS); Radio Link Control (RLC) proto