ETSI TR 102 314-6-2004 Fixed network Multimedia Messaging Service (F-MMS) Part 6 Control strings (service codes) for MMS functions and MMS supplementary services (V1 1 2)《接入和终端(AT)_1.pdf

1、 ETSI TR 102 314-6 V1.1.2 (2004-12)Technical Report Fixed network Multimedia Messaging Service (F-MMS);Part 6: Control strings (service codes)for MMS functions and MMS supplementary servicesETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 2 Reference RTR/AT-030039 Keywords ISDN, MMS, PSTN, supplementary serv

2、ice ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document c

3、an be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, th

4、e reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI doc

5、uments is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written pe

6、rmission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trad

7、e Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 3 Content Intellectual Property Rights4 Foreword.4 Introduction 5 1 Sco

8、pe 6 2 References 6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .7 4 Description .7 4.1 MM-SC functions.8 4.1.1 Information flow between MM-TE (MMS user) and MM-SC .8 5 Control strings8 5.1 Syntax and semantics of control strings .8 5.1.1 Syntax .8 5.1.2 Semantics9 5.2 Servi

9、ce codes9 5.3 Service number.9 6 Interworking requirements .9 7 Interaction with supplementary services 9 Annex A: Control strings.10 A.1 MMS functions.10 A.1.1 Registration and erasure .10 A.1.2 Activation and deactivation10 A.2 SMS supplementary services11 A.2.1 Multimedia Message Diversion (MMD)

10、11 A.2.2 Multimedia Message Copy (MMC) .11 A.2.3 Anonymous Multimedia Message Rejection (AMMR)11 A.2.4 Void12 A.2.5 Outgoing MM White List / Black List (OMMWL / OMMBL)12 A.2.5.1 Insertion and deletion12 A.2.5.2 Activation and deactivation 12 A.2.6 Incoming MM White List / Black List (IMMWL / IMMBL)

11、13 A.2.6.1 Insertion and deletion13 A.2.6.2 Activation and deactivation 13 A.2.7 Multimedia Message Distribution List (MMDL) .14 A.2.7.1 Creation, modification, deletion and copying.14 A.2.7.2 Interrogation .14 A.2.7.3 Invocation .15 A.2.8 Personal Identification Number (PIN)15 A.2.8.1 Modification

12、of the PIN15 Annex B: List of Service Codes used for MMS.16 History 17 ETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is

13、 publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the

14、 ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which

15、are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Access and Terminals (AT). The present document is part 6 of a multi-part deliverable covering the Fixed network Multimedia Messaging Service (F-MMS), a

16、s identified below: TS 102 314-1: “Overview“; ES 202 314-2: “Service description“; EG 202 314-3: “Network architecture and interconnection“; ES 202 314-4: “Multimedia Message communication between a fixed network Multimedia Messaging Terminal Equipment and a Multimedia Messaging Service Centre“; ES

17、202 314-5: “Digital Subscriber Signalling System No. one (DSS1) protocol, Signalling System No.7 (SS7) - ISDN User Part (ISUP), and Interworking between DSS1 and ISUP“; TR 102 314-6: “Control strings (service codes) for MMS functions and MMS supplementary services“; TS 102 314-7: “Over-the-Line conf

18、iguration of F-MMS terminal settings“; ES 202 314-8: “ Service description“; ES 202 314-9: “Combined PSTN/ISDN and broadband access and broadband access only; Multimedia Message communication between a fixed network Multimedia Messaging Terminal Equipment and a Multimedia Messaging Service Centre“.

19、NOTE: The parts above refer to the active work items and published standards within ETSI. These work items do not include MMS over NGN. ETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 5 Introduction The Multimedia Messaging Service (MMS) is a service that shall make it possible to offer seamless MMS over di

20、fferent networks (PSTN, ISDN, PLMN). In the following of this present document it is assumed that both the sending and receiving Terminal Equipment (TE) have appropriate capabilities to send, receive, store, display and delete multimedia messages. Further it is assumed that the Multimedia Messaging

21、Service Centre (MM-SC) is able to receive and process all or part of the control strings (service codes) in annex A. Alternatively, MMS control strings can be sent as an SMS to an SM-SC which is able to receive and forward MMS control stings to the relevant MM-SC. This is a service provider option.

22、Concerning the service codes the ES 201 382 3 and TR 102 083 4 have been taken into account as far as possible, even though these documents are only relevant for supplementary service codes used for public network services. ETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 6 1 Scope The present document defin

23、es the control strings (service codes) for functions and supplementary services defined in the service description of the Multimedia Messaging Service (MMS). These MMS control strings can be used between a Multimedia Messaging Terminal Equipment (MM-TE) and a Multimedia Messaging Service Centre (MM-

24、SC) to control both the MMS functions and the optional MMS supplementary services. These MMS control strings can be used via ISDN and PSTN accesses. The present document describes the method to implement MMS control strings only. Other MM-SC based methods may be possible. The present document includ

25、es information applicable to service providers (MM-SC) and terminal equipment (MM-TE) manufacturers. The present document describes only the MMS control strings to control the according functions and supplementary services in the MM-SC; any charging principles of those services are outside the scope

26、 of the present document. There are no interactions relevant with telephony supplementary services. Furthermore, conformance to the present document is met by conforming to the appropriate information sent and received by the MM-TE and the MM-SC. Therefore no method of testing is provided for the pr

27、esent document. 2 References For the purposes of this Technical Report (TR) the following references apply: 1 ETSI TS 102 314-1: “Fixed network Multimedia Messaging Service (F-MMS); Part 1: Overview“. 2 ETSI ES 202 314-2: “Fixed network Multimedia Messaging Service (F-MMS); PSTN/ISDN; Part 2: Servic

28、e description“. 3 ETSI ES 201 382: “Human Factors (HF); Procedure for registering a supplementary service code“. 4 ETSI TR 102 083: “Human Factors (HF); Supplementary service codes for use in public network services“. 5 ETSI TS 123 040: “Digital cellular telecommunications system (Phase 2+); Univers

29、al Mobile Telecommunications System (UMTS); Technical realization of Short Message Service (SMS) (3GPP TS 23.040 Release 4)“. 6 ETSI TS 123 140: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Multimedia Messaging Service (MMS); Functional d

30、escription; Stage 2 (3GPP TS 23.140 Release 4)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ES 202 314-2 2 and the following apply: control string: number of defined characters which is a synonym for a specific control

31、 word NOTE: It can be interpreted by a machine (e.g. in the MM-SC). initiating user: user who has initiated a control MM or alternatively a control SM which includes an MM control string ETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 7 3.2 Abbreviations For the purposes of the present document, the followi

32、ng abbreviations apply: ACT ACTivation AMMR Anonymous Multimedia Message Rejection DEACT DEACTivation ERA ERAsure IMMBL Incoming MM Black List IMMBWL Incoming MM Black/White List IMMWL Incoming MM White List ISDN Integrated Services Digital Network MM Multimedia Message MMC MM Copy MMD MM Diversion

33、MMDL MM Distribution List MMMID Malicious MM IDentification MMS Multimedia Messaging Service MM-SC Multimedia Messaging Service Centre MM-TE Multimedia Message Terminal Equipment MSN Multiple Subscriber Number OMMBL Outgoing MM Black List OMMBWL Outgoing MM Black/White List OMMWL Outgoing MM White L

34、ist PIN Personal Identification Number PLMN Public Land Mobile Network PSTN Public Switched Telephone Network REG REGistration SC Service Code SM Short Message SMS Short Message Service SM-SC Short Message Service Centre TE Terminal Equipment 4 Description The Multimedia Messaging Service (MMS) enab

35、les a sending user to send an MM to a receiving user via an MM-SC. To realize this service it may optionally be necessary, depending on the network/service provider, that a subscriber who wants to send and/or receive MM has to register his/her telephone number (e.g. MSN) on the preferred MM-SC, firs

36、t. The registration procedure as well as further basic functions (e.g. erasure, activation and deactivation of MM reception, etc.) or MMS supplementary services (e.g. MMC, MMMID, etc.) is done by sending a control string from the MM-TE to the MM-SC within an MM or alternatively to the related SM-SC

37、within an SM to a specific service number. The present document describes European harmonized control strings (service codes) for the known MMS functions and MMS supplementary services defined in the MMS service description 2 and defines a preferred specific service number where a control string sha

38、ll be addressed to. Most control strings defined in the present document are sent with a service code like for telephony supplementary services in PSTN/ISDN (e.g. * # ). In some cases extra information is needed. The service centres should be able to recognize and process these control information.

39、Each control process should be managed in the MM-SC which should react accordingly. Further, the MM-SC shall send back a response MM or SM to the initiating MM-TE which contains a positive or negative acknowledgement about the previously submitted service request or the requested information in case

40、 of an interrogation. The preparation of such a control MM as well as any necessary configurations in an MM-TE are outside the scope of the present document. ETSI ETSI TR 102 314-6 V1.1.2 (2004-12) 8 4.1 MM-SC functions 4.1.1 Information flow between MM-TE (MMS user) and MM-SC MM-TE Time MM-SC ( fix

41、ed network) Service response (MM/SM) Service request (Control MM/SM) (MMS user) Figure 1: Information flow between MM-TE and MM-SC Each control string is sent from an MM-TE to the MM-SC or alternatively to the SM-SC within an outgoing message. After the MM-SC has received any control string the MM-S

42、C shall verify and process the received function and should respond with an acknowledgement or the desired data within an MM or alternatively within an SM to the MM-TE (initiating user). In case where MMS control strings have been sent to the SM-SC, the SM-SC is responsible for forwarding this infor

43、mation to the MM-SC. 5 Control strings Control strings are used to activate, deactivate or interrogate MMS functions or MMS supplementary services in the MM-SC. The list of MMS functions and MMS supplementary services with their control strings is given in annex A. 5.1 Syntax and semantics of contro

44、l strings 5.1.1 Syntax In the present document the syntax for all control strings is as follows: mandatory information is written in optional information is written in brackets repeated information is written in braces := means “is defined as“ | means “exclusive OR“ ; remarks ETSI ETSI TR 102 314-6

45、V1.1.2 (2004-12) 9 5.1.2 Semantics In the present document the semantics of a control string is as follows: CONTROL INFORMATION := SERVICE CODE := PARAMETER := | NUMERIC STRING := 0|1|2|3|4|5|6|7|8|9 ALPHANUMERIC STRING := A|B|C| |X|Y|Z|a|b|c| . |x|y|z|0|.|9 EMAIL STRING := Characters according to T

46、S 123 040 5 or TS 123 140 6 PIN := NOTE: and the parameters that follow are for registration and activation procedures; and the parameters that follow are for erasure and deactivation procedures; it is also used as end of string indication. and the parameters that follow are for interrogation of dat

47、a in the user profile; is used if one of a set of parameters (except the last one) is not used or necessary; (the last parameter can be left out without and can be replaced by #). 5.2 Service codes Control strings may consist of just a star and/or a hash followed by a service code and a hash. In som

48、e cases further information is necessary where each parameter is separated by a star or in some cases by a “blank“ character. In all cases a hash is the last character (end of string). These strings are similar to those which are used for PSTN/ISDN supplementary services (e.g. keypad strings : * 21

49、* # = call forwarding to another destination number). 5.3 Service number For sending any control string from an MM-TE to the MM-SC or alternatively to the SM-SC within an outgoing message, it is necessary to address this MM/SM to a specific service number in the MM-SC / SM-SC. To make it easier for TE designer and also for users, this service number should be the same in all MM-SC / SM-SC. This European harmonized service number should be: Service Number := 8889 6 Interworking requirements There are no interworking require