ETSI TR 103 000-1-2003 Access and Terminals (AT) Analogue Access to Public Telephone Network Advisory Notes to Standards Harmonizing Terminal Interface Part 1 List of All Advisory .pdf

1、ETSI TR 103 000-1 VI .1.2 (2003-06) Technical Repor Access and Terminals (AT); Analogue Access to Public Telephone Network; Advisory Notes to Standards Harmonizing Terminal Interface; Part 1: List of all Advisory Notes 2 ETSI TR 103 000-1 VI .I .2 (2003-06) Reference RTR/AT-010114-01 Keywords analog

2、ue, PSTN, terminal ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the p

3、resent document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In c

4、ase of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this

5、and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction e

6、xtend to reproduction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the ben

7、efit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI TR 103 000-1 VI . 1 . 2 (2003-06) Contents Intellectual Property Rights 4 Applicability . 5 1 Scope 6 2 References 6 3 Definition and abbreviations 7 3.1

8、 Definition . 7 3.2 Abbreviations . 7 4 List of the Advisory Notes . 8 General information . 8 4.1 4.2 Generally applicable AN . . 8 4.3 Network or Country specific AN . 9 4.4 Information arising from CEC decisions . . 9 Annex A: Bibliography 10 Foreword . 4 History 11 ETSI 4 ETSI TR 103 000-1 VI .I

9、 .2 (2003-06) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “Intell

10、ectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has

11、 been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Tech

12、nical Committee Access and Terminals (AT). The present document is part 1 of a multi-part deliverable covering Access and Terminals (AT); Analogue Access to Public Telephone Network; Advisory Notes to Standards Harmonizing Terminal Interface, as identified below: Part 1: Part 2: “List of all Advisor

13、y Notes“; “Generally applicable Advisory Notes“; Sub-part 1 : “Modification to sending spectral density requirements“; Part 3: “Country Specific Advisory Notes“; Sub-part 1 : “ATAAB Advisory Note ANO 18 for the Czech Republic Network; Automatic dialling with dial tone detection“; Sub-part 2: “ATAAB

14、Advisory Note ANO19 for the Czech Republic Network; DTMF signalling: tone and pause duration“; “ATAAB Advisory Note AN020 for the Czech Republic Network; Loop current characteristics (seizing the line)“; Sub-part 3 : Part 4: “DC Characteristics“. At the date of the lst edition these Advisory Notes r

15、efer to the following standards: TBR015 i; TBR017 2; TBR021 3; EN 301 437 5 (“TBR 037“); TBR038 4. The present document shall not be understood as having relevance for regulatory purposes, neither should it be considered a means of defining requirements out of the scope of the earlier EU Directive 9

16、8/13/EEC, i.e. legislation justiSling e.g. TBR 021 3. The intention of the present document is, as far as possible, to keep the harmonized type of interfaces and facilitate the globalization of the use of such harmonizing standards. To reach this goal, it was found that an increase in the number of

17、requirements, while possibly enhancing the quality of service provided to some users, may rapidly result in an increase of the number of diverging options, decreasing then the advantages of a full harmonization. Additional performances may be specified in separate deliverables. ETSI 5 ETSI TR 103 00

18、0-1 VI .I .2 (2003-06) If the responsibility of the publication of country or network specific information remains on the organization originating it, then the corresponding information is not available in the present series of documents. Part 1 of the present series of documents gives general guida

19、nce and explains general principles and common aspects. Part 2 of the present series of documents contains generally applicable advisory notes. Part 3 of the present series of documents contains country or network specific information recognized by TC AT as relevant and in the scope of the earlier E

20、U Directive 98/13/EC. Part 4 of the present series of documents (see clause 4.4) will contain information resulting from measures currently applicable and decided by CEC. Ap p I ica b i I i ty The present document is applicable for Terminal Equipment intended for analogue connection to the Public Te

21、lephone Network. By extension it may also be applied to Equipment offering private interfaces based on similar technologies. ETSI 6 ETSI TR 103 000-1 VI .I .2 (2003-06) 1 Scope The present document: gives guidance on the application of the ETSI documents harmonizing terminal analogue interface to be

22、 connected to the Public Telephone Network; this includes voice and non-voice terminals for switched and leased lines; is therefore applicable to Telecommunications Terminal Equipment intended for Analogue Access to Public Telephone Network. By extension the present document may also be applied to e

23、quipment offering private interfaces based on similar technologies. The present document is intended to be an overview of all the parts of the TR 103 O00 series of documents and should be used together with each single part or sub-part of this series. 2 Re fe re nces For the purposes of this Technic

24、al Report (TR) the following references apply: ETSI TBR O 15: “Business TeleCommunications (BTC); Ordinary and Special quality voice bandwidth 2-wire analogue leased lines (A20 and A2S); Attachment requirements for terminal equipment interface“. ETSI TBR O 17: “Business TeleCommunications (BTC); Ord

25、inary and Special quality voice bandwidth 4-wire analogue leased lines (A40 and A4S); Attachment requirements for terminal equipment interface“. ETSI TBR 02 1 : “Terminal Equipment (TE); Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networ

26、ks (PSTNs) of TE (excluding TE supporting the voice telephony service) in which network addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signalling“. ETSI TBR 038: “Public Switched Telephone Network (PSTN); Attachment requirements for a terminal equipment incorporating an ana

27、logue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe“. ETSI EN 30 1 437: “Terminal Equipment (TE); Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks (PS

28、TNs) of TE supporting the voice telephony service in which network addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signalling“. ETSI EG 201 121: “A guide to the application of TBR 21“. The present clause is intended to list all documents referred to in all other documents of

29、 the present series. This should facilitate a single central list of most relevant documents in this area, not requiring from every single document the repetition of partial lists. References specific to a single part of the present series of documents may not be included in the present clause. ETSI

30、 7 ETSI TR 103 000-1 VI .I .2 (2003-06) 3 Definition and abbreviations 3.1 De fin it ion For the purposes of the present document, the followiilg terms and definitions applies: TBR. Technical Basis for Regulation under the EU Directives 91/263/EEC and 98/13/EEC. NOTE: In the present document equival

31、ent to deliverables of the series EN 301 4xx when mandated by CEC. 3.2 Abbreviations For the purposes of the present document, the followiiig abbreviations apply: AN ATA ATAAI BTC CEC CEPT CH CTR cz DE DTMF ES EU F GR NO P PSTN TBR TE TRAC 3 Advisory Note Analogue Terminals and Access Analogue Type

32、Approval Advisory Board Business TeleComnunications Commission of the European Community Confrence Europenne des administrations des Postes et des Tlcommunications Switzerland Common Technical Regulation Czech Republic Germany Dual Tone Multi Frequency Spain European Union France Greece Norway Portu

33、gal Public Switched Telephone Networks Technical Basis for Regulation Terminal Equipment Technical Regulations Application Committee ETSI 8 ETSI TR 103 000-1 VI .I .2 (2003-06) 4 4.1 List of the Advisory Notes General i nformati on The present document, part 1 of the present series of documents list

34、s all parts and sub-parts of this series of documents and explains in general their interest and applicability. 4.2 Generally applicable AN Part 2 of the present series of documents is a sequence of sub-parts each one speciSling an AN which was adopted by the experts as being of general interest and

35、 applicability. Table 1 lists all of the ANS considered in this criterion. Table 1: Generally applicable Advisory Notes, relationship with ATAAB Advisory Notes and assignment of the part number in the series of TR 103 O00 -ext copied from former TRAC, ATAAB server (contents now archived by ETSI at:

36、dOTE 1: AN 08 was allocated to DE 03. The proposal suggested that the signal level restrictions in the on-line state should also apply in the off-line state. General support was received from the members of ATAAB for DE 03 and therefore the production of a general AN was suggested. However, it would

37、 have introduced a further requirement, which the members of ETSI had not had the opportunity to consider. It was therefore proposed that this would be a national requirement and consideration should be given to including such a requirement in any subsequent revision of TBR 21. A draft will be produ

38、ced introducing a voluntary requirement, it will then be left to ETSI ATA to discuss whether a mandatory requirement is introduced in a later update of CTR 21. This then retains the voluntary spirit of Advisory Notes, but gives a clear indication of the need for some restrictions. dOTE 2: All the AN

39、 identified with (*) are published in EG 201 121 V1.1.3 6 and will be published in the present series of documents as soon as they need a revision. 3) : ETSI 9 Part- Sub-part ETSI TR 103 000-1 VI .I .2 (2003-06) ATAAB Network or Related TBR Subject, contents, remarks designation Country or EN 301 4x

40、x 4.3 (*) (*) (*) Network or Country specific AN AN 001R00 P AN 002R01 CH/NO AN 005R01 DE/GR/P/ES 21 Automatic line clearing conditions. 21 21 5 s waiting before automatic dialling (limit reduction from 8 s to 5 s). 24 Vrms ringing detection (limit reduction from 30 V to 24 V). Part 3 of the present

41、 series of documents is a sequence of sub-parts each one speciSling an AN which was adopted by the experts as being of general interest but applicable only to the networks identified. Table 2 lists all of the ANS considered in this criterion. (*) (*) Table 2: Network or Country specific Advisory Not

42、es, relationship with ATAAB Advisory Notes and assignment of the part number in the series of TR 103 O00 /NO AN 006R00 DE/GR/P 21 Additional test voltage (150 V) for resistance to Earth. AN 007R01 DE/P/ES/NO 21 Control requirements (release line if no correct operation) in the case (*) IAN 009R00 ID

43、E 21 Ilnstantaneous voltage tested over a wider frequency range. (*) IAN 010R00 IDE I I I lof external Dower failure. 21 Isending levels according to TBR 15. (*) (*) 3-1 3-2 AN OllR00 P 21 2 min answering for automatic devices. AN012R00 ES 21 Immunity to polarity reversals. AN018R00 CZ 21, 37 Automa

44、tic dialling with dial tone detection. AN019R00 CZ 21, 37 DTMF signalling: tone and pause duration. Withdrawn 8 of April 3-3 4.4 2003. 2003. AN020R00 CZ 21, 37 loop current characteristics (seizing the line). Withdrawn 8 of April Information arising from CEC decisions Part- Sub-part 4-1 Part 4 of th

45、e present series of documents is a sequence of sub-parts each one speciSling an AN which was adopted by the experts as being of general interest and applicability, resulting from measures currently applicable and decided by CEC. ATAAB Network or Related TBR Subject, contents, remarks designation Cou

46、ntry or EN 301 4xx F 21. 37 DC characteristics Table 3 lists all of the ANS considered in this criterion. Table 3: Advisory Notes, information arising from CEC decisions, relationship with ATAAB Advisory Notes and assignment of the part number in the series of TR 103 O00 ETSI 10 ETSI TR 103 000-1 VI

47、 .I .2 (2003-06) Annex A: Bibliography Directive 98/13/EC of the European Parliament and of the Council of 12 February 1998 relating to telecommunications terminal equipment and satellite earth station equipment, including the mutual recognition of their conformity. Council Directive 91/263/EEC of 2

48、9 April 1991 on the approximation of the laws of the Member States concerning telecommunications terminal equipment, including the mutual recognition of their conformity. TRAC: TRAC Advisory Notes now archived by ETSI at littl?:/l?ortai.ets.r/at/T/T Advisorv Notes.asp ETSI TC AT: mw.etsi.org/at ETSI 11 ETSI TR 103 000-1 VI .I .2 (2003-06) vl.l.l v1.1.2 History August 200 1 Publication June 2003 Publication ETSI