ETSI TR 103 400-2017 Electromagnetic compatibility and Radio spectrum Matters (ERM) Impact of CENELEC EN 55035 on ETSI EMC Standards (V1 1 1)《电磁兼容性和无线电频谱管理(ERM) 欧洲电工标准化委员会 EN 55035.pdf

1、 ETSI TR 103 400 V1.1.1 (2017-03) Electromagnetic compatibility and Radio spectrum Matters (ERM); Impact of CENELEC EN 55035 on ETSI EMC Standards TECHNICAL REPORT ETSI ETSI TR 103 400 V1.1.1 (2017-03) 2 Reference DTR/ERM-EMC-318 Keywords EMC, measurement, radio ETSI 650 Route des Lucioles F-06921 S

2、ophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The

3、 present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such

4、versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on t

5、he current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notificatio

6、n No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and th

7、e foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered fo

8、r the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 103 400 V1.1.1 (2017-03) 3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g

9、32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Introduction to CENELEC EN 55035 8g34.1 Scope of CENELEC EN 55035 8g34.2 Scope of CISPR 35 . 8g34.3 European Common modifications in EN 55035 . 8g35 ETSI EMC

10、deliverables with immunity requirements . 9g35.1 Harmonised EMC standards with immunity requirements . 9g35.2 Other EMC Standards with immunity requirements 9g36 Comparison between CENELEC EN 55035 and ETSI deliverables . 9g36.1 Introduction 9g36.2 Comparison between CENELEC EN 55035 and ETSI EN 300

11、 386 9g36.2.1 General 9g36.2.2 Performance criteria 9g36.2.3 Immunity requirements. 10g36.2.4 Differences between ETSI EN 300 386 and CENELEC EN 55035 . 16g36.3 Comparison between CENELEC EN 55035 and ETSI EN 301 489-1 17g36.3.1 General 17g36.3.2 Performance criteria 17g36.3.3 Immunity requirements.

12、 18g36.3.4 Differences between ETSI EN 301 489-1 and CENELEC EN 55035 23g36.4 Comparison between CENELEC EN 55035 and ETSI EN 303 446-1 and ETSI EN 303 446-2 . 25g36.4.1 General 25g36.5 Comparison between CENELEC EN 55035 and ETSI ES 201 468 25g36.5.1 General 25g37 Impact on specific deliverables an

13、d recommendations for action 25g37.1 Harmonised EMC standards . 25g37.1.1 General 25g37.1.2 ETSI EN 300 386 25g37.1.3 ETSI EN 301 489 series 26g37.1.4 ETSI EN 303 446-1 and ETSI EN 303 446-2 . 26g37.2 Other EMC Standards 26g37.2.1 ETSI ES 201 468 26g3History 27g3ETSI ETSI TR 103 400 V1.1.1 (2017-03)

14、 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Prope

15、rty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR sear

16、ches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by E

17、TSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verba

18、l forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 103 400 V1.1.1 (2017-03) 5 1 Scope The present document is intended to review the impact of CENELEC EN 55035 i.1 on existing ETSI EMC deliverables a

19、nd to recommend to ETSI TC ERM as to what (if any) changes should be made to these deliverables. In should be noted that if changes are made to existing deliverables, then the usual procedures as per the ETSI TWP i.29 are to be followed. It should also be noted the present document bases it review a

20、round edition 1 of CENELEC EN 55035 i.1. 2 References 2.1 Normative references Normative references are not applicable in the present document. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For s

21、pecific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity.

22、The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 CENELEC EN 55035:2017: “Electromagnetic compatibility of multimedia equipment - Immunity requirements“. i.2 CISPR 35 (08-2016): “Ele

23、ctromagnetic compatibility of multimedia equipment - Immunity requirements“. i.3 ETSI EN 300 386 (V2.1.1): “Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements; Harmonised Standard covering the essential requirements of the Directive 2014/30/EU“. i.4 ETSI EN 301 489

24、 (all parts): “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services“. i.5 ETSI EN 301 489-1 (V2.1.1): “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard covering the essential requirement

25、s of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU“. i.6 ETSI ES 201 468: “Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in

26、specific applications“. i.7 ETSI TR 101 651: “ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Classification of the electromagnetic environment conditions for equipment in telecommunication networks“. i.8 CENELEC EN 61000-6-1: “Electromagnetic compatibility (EMC) - Part 6-1: Generic

27、standards - Immunity for residential, commercial and light-industrial environments“. i.9 CENELEC EN 61000-6-2: “Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments“. ETSI ETSI TR 103 400 V1.1.1 (2017-03) 6 i.10 CENELEC EN 55020: “Sound and television broadcas

28、t receivers and associated equipment - Immunity characteristics - Limits and methods of measurement“. i.11 CENELEC EN 55024: “Information technology equipment - Immunity characteristics - Limits and methods of measurement“. i.12 CISPR 20: “Sound and television broadcast receivers and associated equi

29、pment - Immunity characteristics - Limits and methods of measurement“. i.13 CISPR 24: “Information technology equipment - Immunity characteristics - Limits and methods of measurement“. i.14 CENELEC EN 55032: “Electromagnetic compatibility of multimedia equipment - Emission Requirements“. i.15 CISPR

30、32: “Electromagnetic compatibility of multimedia equipment - Emission Requirements“. i.16 CENELEC EN 61000-4-2 (2009): “Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test“. i.17 CENELEC EN 61000-4-3 (2006), A1 (2008) and A2 (201

31、0): “Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test“. i.18 CENELEC EN 61000-4-4 (2012): “Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient

32、/burst immunity test“. i.19 CENELEC EN 61000-4-5 (2006): “Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test“. i.20 CENELEC EN 61000-4-6 (2009): “Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to con

33、ducted disturbances, induced by radio-frequency fields“. i.21 CENELEC EN 61000-4-11 (2004): “Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests“. i.22 CENELEC EN 61000-4-8 (2010): “Electromagne

34、tic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test“. i.23 ISO 7637-2 (2004): “Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only“. i.24 CENELEC EN 61

35、000-4-20 (2010): “Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides“. i.25 CENELEC EN 61000-4-21 (2011): “Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniqu

36、es - Reverberation chamber test methods“. i.26 Recommendation ITU-T K.20: “Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents“. i.27 Recommendation ITU-T K.21: “Resistibility of telecommunication equipment installed in customer prem

37、ises to overvoltages and overcurrents“. i.28 ETSI EN 300 132-2: “Environmental Engineering (EE); Power supply interface at the input to telecommunications and datacom (ICT) equipment; Part 2: Operated by -48 V direct current (dc)“. i.29 ETSI Directives, Technical Working Procedures. i.30 Commission

38、Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast). ETSI ETSI TR 103 400 V1.1.1 (2017-03) 7 i.31 Commission Directive 2014/53/EU of the European Parliament and

39、 of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.32 CISPR 16-1-2: “Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2:

40、 Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements“. i.33 CENELEC EN 55016-1-2: “Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devic

41、es for conducted disturbance measurements“. i.34 ETSI EN 303 446-1 (DEN/ERM-EMC-348-1): “ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment; Part 1: Requirements for equipment intended to be used in residential, commercial and light industry loc

42、ations; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU“. i.35 ETSI EN 303 446-2 (DEN/ERM-EMC-356): “ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment; Part 2: Specific conditions for equipment

43、intended to be used in industrial locations; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: audio equipment: equip

44、ment which has a primary function of either (or a combination of) generation, input, storage, play, retrieval, transmission, reception, amplification, processing, switching or control of audio signals broadcast receiver equipment: equipment containing a tuner that is intended for the reception of br

45、oadcast services messages and which may be equipped with one or more ports typically for information transfer entertainment lighting control equipment: equipment generating or processing electrical signals for controlling the intensity, colour, nature or direction of the light from a luminaire, wher

46、e the intention is to create artistic effects in theatrical, televisual or musical productions and visual presentations Information Technology Equipment (ITE): equipment having a primary function of either (or a combination of) entry, storage, display, retrieval, transmission, processing, switching,

47、 or control of data and/or telecommunication Multimedia equipment (MME): equipment that is information technology equipment, audio equipment, video equipment, broadcast receiver equipment, entertainment lighting control equipment or a combination of these video equipment: equipment which has a prima

48、ry function of either (or a combination of) generation, input, storage, display, play, retrieval, transmission, reception, amplification, processing, switching or control of video signals 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AC Alternating Cu

49、rrent AM Amplitude ModulationCISPR Comit International Spcial des Perturbations Radiolectriques (International Special Committee on Radio Interference) CPE Customer Premise Equipment CRT Cathode Ray Tube DC Direct CurrentDVB-C Digital Video Broadcasting - Cable EC European Commission ETSI ETSI TR 103 400 V1.1.1 (2017-03) 8 EMC ElectroMagnetic Compatibility EN European Norm ES ETSI StandardEUT Equipment Under Test ITE Information Technology Equipment ITU-T International Telecommunication Union - Tele