ETSI TR 122 944-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Report on service requirements for UE functio.pdf

1、 ETSI TR 122 944 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Report on service requirements for UE functionality split (3GPP TR 22.944 version 14.0.0 Release 14) TECHNICAL REPORT ETSI ETSI TR 122 944 V14.0.0 (

2、2017-03)13GPP TR 22.944 version 14.0.0 Release 14Reference RTR/TSGS-0122944ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la So

3、us-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall

4、 not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Se

5、cretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present documen

6、t, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by writt

7、en permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTS

8、TMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI

9、 TR 122 944 V14.0.0 (2017-03)23GPP TR 22.944 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and no

10、n-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pu

11、rsuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present d

12、ocument. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identit

13、ies can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expressi

14、on of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 122 944 V14.0.0 (2017-03)33GPP TR 22.944 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introducti

15、on 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 5g34 General Aspects 6g34.1 Overview of User Equipment . 6g34.2 Background to Requirements . 7g34.3 Assumptions . 8g35 Requirements 8g35.1 General . 8g35.2 Security 9g35.3 Functional

16、ity split . 9g35.3.1 MT Functions 9g35.3.2 TE Functions . 9g35.4 TE-MT Reference Point . 10g3Annex A: Example Scenarios 11g3Annex B: Scenarios for possible functionality split for the Circuit domain . 14g3Annex C: Change history 22g3History 23g3ETSI ETSI TR 122 944 V14.0.0 (2017-03)43GPP TR 22.944 v

17、ersion 14.0.0 Release 14Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the

18、present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under

19、 change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The future environment will be characterised by f

20、eatures such as multimedia services and the convergence of 3GPP systems and the Internet. In this environment the total User Equipment used to access 3GPP services may be implemented over a number of physical devices. For example the User Equipment may include a PC or PDA with appropriate client sof

21、tware as well as a separate module containing radio protocols and other elements. These cases are referred to under the term “UE Functionality Split” or just “UE Split”. This report identifies scenarios and requirements for UE Functionality Split. ETSI ETSI TR 122 944 V14.0.0 (2017-03)53GPP TR 22.94

22、4 version 14.0.0 Release 141 Scope This report identifies scenarios and requirements for UEs with functionality split over multiple devices. Scenarios that are required to be supported in the standard are defined in detail. The requirements in this report should enable interoperability between user

23、equipment components from different vendors. This report is not intended to identify all possible or permitted functionality splits. Certain splits of functionality may be prohibited for security or other reasons. This report does not identify all prohibited scenarios. 2 References The following doc

24、uments contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a

25、 non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 21.905: “Vocabulary for 3GPP Specifi

26、cations“. 2 3GPP TS 22.060: “General Packet Radio Service (GPRS); Service Description; Stage 1“. 3 3GPP TS 22.228: “Service Requirements for the IP Multimedia; Core Network Subsystem; Stage 1“. 4 3GPP TS 23.101: “General UMTS Architecture“. 5 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLM

27、N) access reference configuration“. 3 Definitions, symbols and abbreviations 3.1 Definitions User Equipment Combination: All the user equipment that is connected and used together in a particular scenario. For example a user equipment combination may consist of an MT and all the TEs that are connect

28、ed to that MT. User Equipment Component: Any one of a number of separate components of user equipment. User equipment components include MTs and TEs. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CC Call Control CCC Call Control Client CS Circuit Swit

29、chedDT Data Termination IMEI International Mobile Station Equipment Identities IMS IP Multimedia Core Network Subsystem IMSI International Mobile Subscriber Identifier IPAF IP Adaptation Function IMC IMS Media Coding ETSI ETSI TR 122 944 V14.0.0 (2017-03)63GPP TR 22.944 version 14.0.0 Release 14IPDT

30、 IP Data Termination ISIM IMS SIM LAN Local Area Network MAC Medium Access Control MM Mobility Management MT Mobile Terminal PC Personal ComputerPCM Pulse Code Modulation PDP Packet Data Protocol PDA Personal Digital Assistant PS Packet Switched RAN Radio Access Network RR Radio Resource SC SIP clie

31、nt SIM Subscriber Identity Module SM Session Management SMC Session Management Client TAF Terminal Adaptation FunctionTE Terminal Equipment TMSI Temporary Mobile Subscriber Identifier UE User Equipment UICC UMTS Integrated Circuit Card USIM UMTS SIM 4 General Aspects 4.1 Overview of User Equipment 3

32、GPP user equipment may take many forms. One case is that all the user equipment is integrated in to a single physical device. This report deals with cases where several different components make up the whole user equipment combination. An example is illustrated below. This illustration is only meant

33、 to introduce concepts and not imply any limitations or physical form for user equipment. Local Wireless Network (eg Bluetooth) Physical Connection User Equipment Combination MT TE TE TE User Equipment Components Figure 1: User Equipment Combination The user equipment combination contains at least o

34、ne MT and may also contain one or more TEs. ETSI ETSI TR 122 944 V14.0.0 (2017-03)73GPP TR 22.944 version 14.0.0 Release 144.2 Background to Requirements The support of UE-functionality split in 3GPP should aim to exploit technology trends and to promote the convergence of 3GPP technologies with Int

35、ernet and computing technologies. The objective of this report is to identify a scenario which is seen as being particularly important for the success of the 3GPP system. The scenario should: - correspond to likely physical scenario for available equipment - offer attractive commercial opportunities

36、 - be simple enough to allow requirements capture and technical specifications to be completed - align with other standards (e.g. Bluetooth, PC-Card) and common industry practice (e.g. major operating systems) where appropriate Allowing some 3GPP related applications to be implemented on TEs separat

37、e from the MT offers advantages such as: - Ability for applications to evolve without changing hardware or firmware. This will improve service velocity. - Ability of 3GPP applications to integrate with a users other business, entertainment and communications tools. - Allowing 3GPP applications to ta

38、ke advantage of the physical characteristics of computer (e.g. large display, memory, processing power) - Ability to use hardware built into the TE (eg speaker, microphone) for input and output. - Integration of emerging wireless LAN technologies (e.g. Bluetooth, 802.11b) with 3GPP networks This wil

39、l facilitate the development of applications in the TE that use 3GPP services independently of the specific 3GPP defined radio module being used. For example the application developer should not need to write different applications for 3GPP defined radio modules made by different vendors. The scenar

40、io considered is shown in Figure 1. In this case, multiple independent applications that are possibly being used by independent users employ one subscription and its information is stored in one UICC as shown in Fig. 1. The user(s) identity is possibly different from the subscribers identity. TE IUM

41、TS/GSM/GPRSNetworkTE IIITE IIMTUICCCBIBIIBIIIFigure 2: Multiple applications and/or users with one subscriber identity. Note: The single TE associated with a single MT scenario is a special case of this scenario. In this case the restriction is that only a single subscription on the UICC may be acti

42、ve. In this release a subscription consists of a SIM/USIM for non-IMS subscribers or a ISIM/USIM pair for IMS subscribers. Examples of where scenario 1 is useful include: - A PC or PDA contains a 3GPP defined radio module to allow it to access 3GPP services. The module may be a (semi)permanent part

43、of the PC or PDA (similar to an embedded modem) or a removable module such as a PC card. ETSI ETSI TR 122 944 V14.0.0 (2017-03)83GPP TR 22.944 version 14.0.0 Release 144.3 Assumptions The following assumptions are made: a The transport link between the TE and MT functions of the UE is not necessaril

44、y secure. b A SIM/USIM application resident on a UICC is required to access the 3GPP system . Only a single USIM on a UICC can be active at any time (multiple USIMs can be located on a UICC). c Charging is linked to one particular USIM. d The secret key and the authentication algorithm cannot be tra

45、nsferred out from the USIM. e The UICC must be present during the entire duration of the call. Periodic UICC presence detection is mandatory during a call. f Requirements identified in 3 regarding the ISIM must be fulfilled. Note: In particular the following requirement from 3 is relevant: “For this

46、 release of UE-split the USIM and the ISIM shall reside on the same UICC (i.e., the ISIM application shall require the presence of a USIM application on the same UICC). This shall not preclude the possibility in later releases of having an ISIM in a UICC that does not contain a USIM.” Note: The foll

47、owing maybe later moved into an appropriate stage 2 document if considered necessary. The functionality split required in this case corresponds to generic way computers treat other types of network interface cards. In this configuration the basic 3GPP protocols are implemented in the 3GPP defined ra

48、dio module (see figure below). The computer contains the following elements: - driver software to control the 3GPP radio module and interface it to the computer operating system - software applications using network protocols (such as IP) which are routed to other computers via the card. MT (UMTS Mo

49、dule eg a PC Card) TE (Computer eg a PC) UICC Basic UMTS Protocols? UMTS Driver Software? Operating System Application API Software elements Key Figure 3: Assumed Topology 5 Requirements Requirements are identified for only the single active subscription for each TE-MT combination case. Requirements for the other more general cases may be added in later releases. 5.1 General 1 The functionality split proposed applies to Circuit Switched (CS) domain. ETSI ETSI TR 122 944 V14.0.0 (2017-03)93GPP TR 22.944 version 14.0.0 Release 142 The functionality split p