ETSI TR 122 944-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Report on service requirements for UE functio.pdf

1、 ETSI TR 122 944 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Report on service requirements for UE functionality split (3GPP TR 22.944 version 15.0.0 Release 15) TECHNICAL REPORT ETSI ETSI TR 122 944 V15.0.0 (

2、2018-07)13GPP TR 22.944 version 15.0.0 Release 15Reference RTR/TSGS-0122944vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la So

3、us-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall

4、 not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Se

5、cretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present documen

6、t, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by writt

7、en permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI

8、registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association

9、. ETSI ETSI TR 122 944 V15.0.0 (2018-07)23GPP TR 22.944 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly av

10、ailable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web se

11、rver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may bec

12、ome, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or re

13、produce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Pro

14、ject (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities c

15、an be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

16、 provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 122 944 V15.0.0 (2018-07)33GPP TR 22.944 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g

17、31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 5g34 General Aspects 6g34.1 Overview of User Equipment . 6g34.2 Background to Requirements . 6g34.3 Assumptions . 7g35 Requirements 8g35.1 General . 8g35.2 Security 9g35.3 Functionality s

18、plit . 9g35.3.1 MT Functions 9g35.3.2 TE Functions . 9g35.4 TE-MT Reference Point . 9g3Annex A: Example Scenarios 10g3Annex B: Scenarios for possible functionality split for the Circuit domain . 13g3Annex C: Change history 21g3History 22g3ETSI ETSI TR 122 944 V15.0.0 (2018-07)43GPP TR 22.944 version

19、 15.0.0 Release 15Foreword This Technical Report has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present docum

20、ent, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change contr

21、ol. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The future environment will be characterised by features such

22、as multimedia services and the convergence of 3GPP systems and the Internet. In this environment the total User Equipment used to access 3GPP services may be implemented over a number of physical devices. For example the User Equipment may include a PC or PDA with appropriate client software as well

23、 as a separate module containing radio protocols and other elements. These cases are referred to under the term “UE Functionality Split” or just “UE Split”. This report identifies scenarios and requirements for UE Functionality Split. ETSI ETSI TR 122 944 V15.0.0 (2018-07)53GPP TR 22.944 version 15.

24、0.0 Release 151 Scope This report identifies scenarios and requirements for UEs with functionality split over multiple devices. Scenarios that are required to be supported in the standard are defined in detail. The requirements in this report should enable interoperability between user equipment com

25、ponents from different vendors. This report is not intended to identify all possible or permitted functionality splits. Certain splits of functionality may be prohibited for security or other reasons. This report does not identify all prohibited scenarios. 2 References The following documents contai

26、n provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific

27、 reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 21.905: “Vocabulary for 3GPP Specifications“. 2 3

28、GPP TS 22.060: “General Packet Radio Service (GPRS); Service Description; Stage 1“. 3 3GPP TS 22.228: “Service Requirements for the IP Multimedia; Core Network Subsystem; Stage 1“. 4 3GPP TS 23.101: “General UMTS Architecture“. 5 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLMN) access ref

29、erence configuration“. 3 Definitions, symbols and abbreviations 3.1 Definitions User Equipment Combination: All the user equipment that is connected and used together in a particular scenario. For example a user equipment combination may consist of an MT and all the TEs that are connected to that MT

30、. User Equipment Component: Any one of a number of separate components of user equipment. User equipment components include MTs and TEs. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CC Call Control CCC Call Control Client CS Circuit SwitchedDT Data T

31、ermination IMEI International Mobile Station Equipment Identities IMS IP Multimedia Core Network Subsystem IMSI International Mobile Subscriber Identifier IPAF IP Adaptation Function IMC IMS Media Coding IPDT IP Data Termination ISIM IMS SIM LAN Local Area Network ETSI ETSI TR 122 944 V15.0.0 (2018-

32、07)63GPP TR 22.944 version 15.0.0 Release 15MAC Medium Access Control MM Mobility Management MT Mobile Terminal PC Personal ComputerPCM Pulse Code Modulation PDP Packet Data Protocol PDA Personal Digital Assistant PS Packet Switched RAN Radio Access Network RR Radio Resource SC SIP client SIM Subscr

33、iber Identity Module SM Session Management SMC Session Management Client TAF Terminal Adaptation FunctionTE Terminal Equipment TMSI Temporary Mobile Subscriber Identifier UE User Equipment UICC UMTS Integrated Circuit Card USIM UMTS SIM 4 General Aspects 4.1 Overview of User Equipment 3GPP user equi

34、pment may take many forms. One case is that all the user equipment is integrated in to a single physical device. This report deals with cases where several different components make up the whole user equipment combination. An example is illustrated below. This illustration is only meant to introduce

35、 concepts and not imply any limitations or physical form for user equipment. Local Wireless Network (eg Bluetooth) Physical Connection User Equipment Combination MT TE TE TE User Equipment Components Figure 1: User Equipment Combination The user equipment combination contains at least one MT and may

36、 also contain one or more TEs. 4.2 Background to Requirements The support of UE-functionality split in 3GPP should aim to exploit technology trends and to promote the convergence of 3GPP technologies with Internet and computing technologies. The objective of this report is to ETSI ETSI TR 122 944 V1

37、5.0.0 (2018-07)73GPP TR 22.944 version 15.0.0 Release 15identify a scenario which is seen as being particularly important for the success of the 3GPP system. The scenario should: - correspond to likely physical scenario for available equipment - offer attractive commercial opportunities - be simple

38、enough to allow requirements capture and technical specifications to be completed - align with other standards (e.g. Bluetooth, PC-Card) and common industry practice (e.g. major operating systems) where appropriate Allowing some 3GPP related applications to be implemented on TEs separate from the MT

39、 offers advantages such as: - Ability for applications to evolve without changing hardware or firmware. This will improve service velocity. - Ability of 3GPP applications to integrate with a users other business, entertainment and communications tools. - Allowing 3GPP applications to take advantage

40、of the physical characteristics of computer (e.g. large display, memory, processing power) - Ability to use hardware built into the TE (eg speaker, microphone) for input and output. - Integration of emerging wireless LAN technologies (e.g. Bluetooth, 802.11b) with 3GPP networks This will facilitate

41、the development of applications in the TE that use 3GPP services independently of the specific 3GPP defined radio module being used. For example the application developer should not need to write different applications for 3GPP defined radio modules made by different vendors. The scenario considered

42、 is shown in Figure 1. In this case, multiple independent applications that are possibly being used by independent users employ one subscription and its information is stored in one UICC as shown in Fig. 1. The user(s) identity is possibly different from the subscribers identity. TE IUMTS/GSM/GPRSNe

43、tworkTE IIITE IIMTUICCCBIBIIBIIIFigure 2: Multiple applications and/or users with one subscriber identity. Note: The single TE associated with a single MT scenario is a special case of this scenario. In this case the restriction is that only a single subscription on the UICC may be active. In this r

44、elease a subscription consists of a SIM/USIM for non-IMS subscribers or a ISIM/USIM pair for IMS subscribers. Examples of where scenario 1 is useful include: - A PC or PDA contains a 3GPP defined radio module to allow it to access 3GPP services. The module may be a (semi)permanent part of the PC or

45、PDA (similar to an embedded modem) or a removable module such as a PC card. 4.3 Assumptions The following assumptions are made: ETSI ETSI TR 122 944 V15.0.0 (2018-07)83GPP TR 22.944 version 15.0.0 Release 15a The transport link between the TE and MT functions of the UE is not necessarily secure. b A

46、 SIM/USIM application resident on a UICC is required to access the 3GPP system . Only a single USIM on a UICC can be active at any time (multiple USIMs can be located on a UICC). c Charging is linked to one particular USIM. d The secret key and the authentication algorithm cannot be transferred out

47、from the USIM. e The UICC must be present during the entire duration of the call. Periodic UICC presence detection is mandatory during a call. f Requirements identified in 3 regarding the ISIM must be fulfilled. Note: In particular the following requirement from 3 is relevant: “For this release of U

48、E-split the USIM and the ISIM shall reside on the same UICC (i.e., the ISIM application shall require the presence of a USIM application on the same UICC). This shall not preclude the possibility in later releases of having an ISIM in a UICC that does not contain a USIM.” Note: The following maybe l

49、ater moved into an appropriate stage 2 document if considered necessary. The functionality split required in this case corresponds to generic way computers treat other types of network interface cards. In this configuration the basic 3GPP protocols are implemented in the 3GPP defined radio module (see figure below). The computer contains the following elements: - driver software to control the 3GPP radio module and interface it to the computer operating system - software applications using network protocols (such as IP) which are routed to other computers