ETSI TR 122 988-2017 Universal Mobile Telecommunications System (UMTS) LTE Study on alternatives to E 164 for Machine-Type Communications (MTC) (V14 0 0 3GPP TR 22 988 version 14 0_1.pdf

1、 ETSI TR 122 988 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Study on alternatives to E.164 for Machine-Type Communications (MTC) (3GPP TR 22.988 version 14.0.0 Release 14) TECHNICAL REPORT ETSI ETSI TR 122 988 V14.0.0 (2017-04)13GPP TR 22.988 version 14.0.0 Release 14R

2、eference RTR/TSGS-0122988ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice

3、 The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizati

4、on of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be awa

5、re that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following se

6、rvices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version

7、shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered

8、 for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ET

9、SI TR 122 988 V14.0.0 (2017-04)23GPP TR 22.988 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and

10、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).

11、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present

12、 document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to

13、 the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to b

14、e interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 122 988 V14.0.0 (2017-04)33GPP TR 22.988 version 14.0.0 Release 14Contents

15、 Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 6g33.3 Abbreviations . 6g34 Use cases 6g34.1 Use case 1 (Wireless Vending Machines) 6g34.1.1

16、 Short Description 6g34.1.2 Actors 7g34.1.3 Pre-Conditions 7g34.1.4 Post-Conditions. 7g34.1.5 Normal Flow . 7g34.1.6 Alternative Flows 8g34.1.7 Exceptions. 8g34.2 Use case 2 (Smart Bridges and Tunnels) 8g34.2.1 Short Description 8g34.2.2 Actors 9g34.2.3 Pre-Conditions 9g34.2.4 Post-Conditions. 9g34.

17、2.5 Normal Flow . 9g34.2.6 Alternative Flows 10g34.2.7 Exceptions. 10g34.3 Use case 3 Implantable Defibrillators 10g34.3.1 Short Description 10g34.3.2 Actors 11g34.3.3 Pre-Conditions 11g34.3.4 Post-Conditions. 11g34.3.5 Normal Flow . 11g34.3.6 Alternative Flows 12g34.3.7 Exceptions. 12g34.4 Use case

18、 4 (Wireless Utility Meters) 12g34.4.1 Short Description 12g34.4.2 Actors 13g34.4.3 Pre-Conditions 13g34.4.4 Post-Conditions. 13g34.4.5 Normal Flow . 13g34.4.6 Alternative Flows 14g34.4.7 Exceptions. 14g34.5 Use case 5 (Wireless Weather Monitors) . 14g34.5.1 Short Description 14g34.5.2 Actors 14g34.

19、5.3 Pre-Conditions 14g34.5.4 Post-Conditions. 15g34.5.5 Normal Flow . 15g34.5.6 Alternative Flows 15g34.5.7 Exceptions. 15g3ETSI ETSI TR 122 988 V14.0.0 (2017-04)43GPP TR 22.988 version 14.0.0 Release 145 High level Service Aspects . 16g35.1 What are the high level requirements for alternatives to E

20、.164 for machine-type communications? 16g35.1.1 Large capacity . 17g35.1.2 Compatibility with existing schemes 17g35.1.3 Impact on existing systems and hardware. 17g35.1.4 Provisioning 17g35.1.5 Device Identity Portability 17g35.1.6 Charging . 18g35.1.7 Services . 18g35.2 What are the security, reli

21、ability, and priority handling requirements for alternatives to E.164 for machine-type communications? . 18g35.3 Are there any implications due to roaming? . 18g35.4 Are there any implications on inter-domain routing? . 18g35.5 Are there any implications to hand-over between access networks? 18g36 M

22、MI Aspects 18g37 Charging Aspects . 19g38 Security Aspects . 19g39 Analysis 19g39.1 MSISDN (E.164) with existing number length 21g39.2 MSISDN (E.164) with max length of 15 digits 21g39.3 E.212 Numbers (IMSI) . 21g39.4 Other Numbering Plan Indicator in MAP . 21g39.5 Generic Uniform Resource Identifie

23、r (URI). 22g39.5.1 SIP Uniform Resource Identifier (URI) 22g39.5.2 TEL Uniform Resource Identifier (URI) 22g39.6 Fully Qualified Domain Name (FQDN) . 23g39.7 IPv4 Address 23g39.8 IPv6 Address 23g39.9 Network Access Identifier (NAI) . 24g310 Conclusion 24g311 Potential requirements for alternatives t

24、o E.164 for machine-type communications . 25g3Annex A: Additional Definitions (Informative) . 26g3Annex B: Change history 27g3History 28g3ETSI ETSI TR 122 988 V14.0.0 (2017-04)53GPP TR 22.988 version 14.0.0 Release 14Foreword This Technical Report has been produced by the 3rdGeneration Partnership P

25、roject (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in

26、version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corr

27、ections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction There are currently unprecedented demands within the telecommunications industry for E.164 MSISDNs resources and these demands are expected to accelerate in the ye

28、ars to come. Accordingly, some countries and their national regulatory authorities have expressed concerns over the numbering requirements of new services involving Machine Type Communications (MTC) services and their expected rapid growth. MTC demand is forecast to grow from 50M connections to over

29、 200M by 2013. A large number of these services are currently deployed over circuit-switched GSM architectures and therefore use E.164 MSISDNs although such services do not require dialable numbers, and generally do not communicate with each other by human interaction. Without technical alternative

30、to using public international numbering resources as addresses, and considering the current forecasts and pending applications for numbers made to numbering plan administration agencies, there is a significant risk that some national numbering/dialling plans will run out of numbers in the near futur

31、e, which would impact not only these MTC services but also the GSM/UMTS service providers in general. ETSI ETSI TR 122 988 V14.0.0 (2017-04)63GPP TR 22.988 version 14.0.0 Release 141 Scope This document seeks to study and highlight the challenge of using the existing public numbering resources to su

32、pport Machine Type Communication (MTC) services and proposes that 3GPP develop an alternative to using public numbering resources for MTC communications. 2 References 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 41.101: “Technical Specifications and Technical Reports for a GERAN

33、-based 3GPP system“. 3 IETF RFC 3986 “Uniform Resource Identifier (URI): Generic Syntax”. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document

34、takes precedence over the definition of the same term, if any, in TR 21.905 1. (void) 3.2 Symbols For the purposes of the present document, the following symbols apply: (void) 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply.

35、An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. NIMTC Network Improvements for Machine Type Communications MNO Mobile Network Operator MTC Machine-Type Communications 4 Use cases 4.1 Use case 1 (Wireless Vending M

36、achines) 4.1.1 Short Description The Snack Company owns 100,000 snack vending machines in the Tri-City area. Each machine is connected to Snacks central network via a wireless connection and sends a report of sales every hour. These scheduled reports are staggered so they dont collide within Snacks

37、systems. These reports are short bursts of no more than a few hundred bytes of data, and typically take less than 3 seconds to transmit. On occasion, Snacks network will contact a machine by sending it an SMS, to which the machine sends a response. ETSI ETSI TR 122 988 V14.0.0 (2017-04)73GPP TR 22.9

38、88 version 14.0.0 Release 14Snack would like to add another 250,000 machines across the state, but their wireless service providers cannot provide enough MSISDNs. One provider, however, has implemented SIP capability, and makes available radio modules that use all-IP connections over the radio netwo

39、rk. The main benefits to this new service is that each machine is assigned a SIP URI rather than a MSISDN (an alphanumerical SIP URI that doesnt encapsulate a phone number), and that the service provider expects network loads and costs to decrease by going with all-IP traffic. The service providers

40、network can easily handle the traffic load from 350,000 vending machines. The service provider has assigned Snack its own domain, vending. , so Snack can assign its own names to the machines. Snack has chosen to use its internal asset numbers for machine names to simplify the mapping from their asse

41、t management system to the messaging interface provided by the service provider. Messages are generated by Snacks system and sent via the Internet to a web service provided by the service provider. The service provider then delivers the messages to the machines using SMS over IP. The machine modules

42、 are pre-configured to send scheduled reports to a web service provided by the service provider that transmits them to Snacks network. All messages are encrypted in transit. Because the service provider was able to “recover” 100,000 previously issued MSISDNs, it was able to expand its coverage to wi

43、reless service consumers, generating much greater margins in the process. 4.1.2 Actors - Snack Company - Its wireless service provider 4.1.3 Pre-Conditions - The service provider has available to it IP-ready radio modules - The service providers network can support SIP or IMS, and is able to map a S

44、IP URI to an IMSI or IMPI in its HLR or HSS node. The service provider can support SIP URIs with a domain name of . - The service provider has a messaging gateway, maybe not much more than a web service - The radio modules are capable of establishing an IP connection in response to a page over the p

45、aging channel 4.1.4 Post-Conditions - Vending machines transmit sales and trouble reports according to the schedule - Snacks network receives and processes the reports - The service providers network supports the traffic load - Machines are reachable via their SIP URI and the service providers messa

46、ge gateway - The service providers experience allows it to lower the price charged to Snack by 25% 4.1.5 Normal Flow In the course of normal operations, there are three main events for a given vending machine: 1) When it first powers up and registers with the network 2) When it generates and sends a

47、 report to the network 3) When the Snack network sends a message to the machine Each of these events is comprised of a sequence of smaller steps. Registration: 1) The machine powers up ETSI ETSI TR 122 988 V14.0.0 (2017-04)83GPP TR 22.988 version 14.0.0 Release 142) The radio module registers throug

48、h the GPRSnetwork in the normal way 3) The radio module registers with the SIP server on the service providers network. This sets up the mapping between the SIP URI in the HSS and the newly assigned IP address Note: this would normally require a MSISDN+IMSI (IMSI for authentication and MSISDN genera

49、lly required in all back-office IT/IS). Remote-originated messages: 1) The machine “wakes up” on schedule and establishes a SIP session with the SIP server 2) The machine generates a report as a short message then transmits that to the SIP server as a message payload. If the message is more than 1500 bytes, then concatenated messages are sent. 3) The SIP server acknowledges receipt of the message 4) The machine terminates the SIP session 5) The machine goes back to “sleep” Remote-terminated messages: 1) The Snack networ