ETSI TR 123 919-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Direct tunnel deployment guideline (V14 0 0 3.pdf

1、 ETSI TR 123 919 V14.0.0 (2017-05) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Direct tunnel deployment guideline (3GPP TR 23.919 version 14.0.0 Release 14) TECHNICAL REPORT ETSI ETSI TR 123 919 V14.0.0 (2017-05)13GPP TR 23.919

2、 version 14.0.0 Release 14Reference RTR/TSGS-0223919ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse

3、(06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified withou

4、t the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the

5、 present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your com

6、ment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI.

7、The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are

8、 Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned

9、by the GSM Association. ETSI ETSI TR 123 919 V14.0.0 (2017-05)23GPP TR 23.919 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly

10、available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

11、server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may b

12、ecome, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be int

13、erpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will no

14、t“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 123 919 V14.0.0 (2017-05)33GPP TR 23.919 ve

15、rsion 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Abbreviations . 5g34 Direct Tunnel Feature . 5g34.1 General . 5g35 Impacts on Functions and Characteristics 6g35.1 Charging . 6g35.2 Lawful Interception

16、 6g35.3 CAMEL 6g35.4 Error Handling 6g36 Impacts on 3GPP Network Entities, Features and Transport Network 7g36.1 SGSN 7g36.2 GGSN . 7g36.3 RNC 8g36.4 IP Backbone Network 8g36.5 IP versions 9g36.6 QoS Architecture 9g37 Limitations of Direct Tunnel Solution . 9g38 Upgrade considerations 9g38.1 Interwo

17、rking with Pre-DT GGSN 9g38.2 Interworking with Pre-DT SGSN . 10g38.3 Interworking with Pre-Rel-7 RNC . 10g3Annex A: Change history 11g3History 12g3ETSI ETSI TR 123 919 V14.0.0 (2017-05)43GPP TR 23.919 version 14.0.0 Release 14Foreword This Technical Report has been produced by the 3rdGeneration Par

18、tnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an in

19、crease in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancem

20、ents, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 123 919 V14.0.0 (2017-05)53GPP TR 23.919 version 14.0.0 Release 141 Scope The present document contains deployment guidelines for the use of direct tunne

21、lling of user plane data between the RNC and the GGSN (earlier known as the One Tunnel approach). This report highlights the impacts of the 3GPP Release 7 Direct Tunnel solution to the current UMTS system in order to guide equipment development and network deployment. 2 References The following docu

22、ments contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. -

23、For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 23.060: “General Packet Radio S

24、ervice (GPRS); Service description; Stage 2“. 2 3GPP TS 23.107: “ Quality of Service (QoS) concept and architecture“. 3 3GPP TS 23.203: “Policy and charging control architecture“. 4 3GPP TS 33.106: “Lawful interception requirements“. 5 3GPP TS 33.107: “3G security; Lawful interception architecture a

25、nd functions“. 6 3GPP TS 33.108: “3G security; Handover interface for Lawful Interception (LI)“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: DT Direct Tunnel LI Lawful Interception 4 Direct Tunnel Feature 4.1 General Direct Tunnel is an optional featu

26、re in Iu mode that allows the SGSN to establish a direct user plane tunnel between RAN and GGSN within the PS domain. The SGSN handles the control plane signalling and makes the decision when to establish a Direct Tunnel. In case of Direct Tunnel, the SGSN provides the RAN with the TEID and user pla

27、ne address of the GGSN, and provides the GGSN with the TEID and user plane address of the RAN. The detailed procedures are specified in TS 23.060 1. ETSI ETSI TR 123 919 V14.0.0 (2017-05)63GPP TR 23.919 version 14.0.0 Release 14Figure 4-1: Direct Tunnel concept 5 Impacts on Functions and Characteris

28、tics 5.1 Charging When a Direct Tunnel is active, the SGSN will no longer be able to count data volumes associated with the PDP context for which the Direct Tunnel is established. As a result of activating a Direct Tunnel for a specific PDP context, an inconsistency in the data volumes captured by t

29、he SGSN and GGSN will arise for that PDP context. Hence, if Direct Tunnel is active, volume based charging can no longer operate when relying on SGSN charging information alone (e.g. CAMEL pre-paid service or charging only on S-CDRs). During an upgrade phase when there exist Pre-DT GGSN or Pre-DT RN

30、C in the network there may in some error situations as described in clause 8 occur a discrepancy in CDR closure time between S-CDRs and G-CDRs. However, no impacts on flow based charging, as defined in TS 23.203 3, are foreseen. 5.2 Lawful Interception If a Direct Tunnel is in use, the LI system can

31、 only collect the communication content from the GGSN. When the LI function in the GGSN is used, some control plane related information, such as SMS and MM-related information can only be collected from the SGSN. Details for LI are specified in following documents: TS 33.106 4, TS 33.107 5, and TS 3

32、3.108 6. 5.3 CAMEL Direct Tunnel is not enabled for a subscriber that has controlling PS domain CAMEL services active. 5.4 Error Handling With the Rel-7 Direct Tunnel feature, the GTP-U related error handling has been slightly changed in the GGSN and RNC. For the Error Handling function to work full

33、y correctly, the GGSN and RNC need to be upgraded to support Direct Tunnel. During a deployment phase, the Direct Tunnel feature may however be used without the GGSN and/or the RNC being upgraded. The shortcomings and issues related with this are mainly that the network may experience hanging PDP co

34、ntexts or inconsistent PDP context data in some rare error cases, e.g. at node failures or restarts. This is further explained in clause 8. ETSI ETSI TR 123 919 V14.0.0 (2017-05)73GPP TR 23.919 version 14.0.0 Release 146 Impacts on 3GPP Network Entities, Features and Transport Network 6.1 SGSN The m

35、ain principle is that whenever a RAB is assigned for a PDP context (or re-assigned) the SGSN decides whether to use a direct user plane tunnel between RNC and GGSN, or, if it needs to handle user plane data and use two tunnels as in earlier 3GPP releases. Further, when a Direct Tunnel was in use and

36、 the RAB assigned for a PDP context is released (i.e. the PDP context is preserved) the GTP-U tunnel is (re)established between the GGSN and SGSN in order to be able to handle the downlink packets. The SGSN needs to decide before every RAB assignment and every SRNS relocation if direct tunnel will b

37、e used or not. Figure 6-1: Connected mode and Idle mode handling In the Intra SGSN Inter-system Change procedure from 3G to 2G, the SGSN needs to perform a PDP Context Update Procedure to establish the tunnel between the 2G SGSN and the GGSN and release the Direct Tunnel between RNC and GGSN. In the

38、 Intra SGSN Inter-system Change procedure from 2G to 3G, the SGSN provides to the RNC the GGSNs Address(es) for User Plane and TEID(s) for Uplink data in the RAB Assignment Request during the Service Request Procedure. Then the SGSN performs a PDP Context Update Procedure to establish the Direct Tun

39、nel between the RNC and the GGSN and release the tunnel between SGSN and GGSN. Toggling between 2G and 3G might (or might not) be frequent. This may effect the Gn signalling when Direct Tunnel is deployed. It is implementation specific how this is addressed. 6.2 GGSN In order to inform the GGSN of t

40、he IP address of the RNC and the TEID for the active PDP context, the SGSN will send an Update PDP Context Request message to the GGSN during every PDP Context Activation procedure for which a Direct Tunnel is established. This message, which is an optional message in two-tunnel system, increases th

41、e signalling load on SGSN and GGSN. RAB release and re-establishment procedures, which become visible to the GGSN in a Direct Tunnel system, also increase the signalling load on SGSN and GGSN. If the radio-link is bad, and the RNC releases the Iu connection, the frequent RAB release and re-establish

42、ment increases the signalling load on SGSN and GGSN. One consequence is that it is useful if the RNC utilises URA-PCH state. Some Intra SGSN procedures, such as Intra SGSN inter RNC, Intra SGSN Inter-system change, and possibly other procedures, which are invisible to the GGSN in two-tunnel system,

43、will become visible to the GGSN and increase the signalling load on both SGSN and GGSN. ETSI ETSI TR 123 919 V14.0.0 (2017-05)83GPP TR 23.919 version 14.0.0 Release 14Receipt of the Direct Tunnel Indicator makes the GGSN aware that the SGSN is using a Direct Tunnel. When using Direct Tunnel, if the

44、GGSN receives a GTP-U Error Indication (from the RNC) it shall not release the related PDP context locally but the GGSN shall notify the SGSN that the RAB in RAN is invalid. This needs the GGSN to be updated. NOTE: During a deployment phase, the Direct Tunnel feature may however be used without the

45、GGSN being upgraded. This is further explained in clause 8.1. If, when using two tunnels transport network QoS was used on Iu-PS but not on Gn then moving to Direct Tunnel requires the GGSN to implement transport network QoS. 6.3 RNC RNCs that only support ATM transport should support IP transport f

46、or the Iu-PS interface. Alternatively a solution as described below in clause 6.4 can be used. Due to this Direct Tunnel feature, the Error Handling Behaviour of Rel-7 RNC is changed. NOTE: During a deployment phase, the Direct Tunnel feature may however be used without the RNC being upgraded. This

47、is further explained in clause 8.3. If, when using two tunnels transport network QoS was used on Gn but not on Iu-PS then moving to Direct Tunnel requires the RNC to implement transport network QoS. 6.4 IP Backbone Network Within the network area where Direct Tunnel is used, the Iu-PS and Gn transpo

48、rt networks must be made visible to each other, this is a network configuration issue. This is minor security drawback. The risk could be reduced by using firewall between Iu-PS and Gn networks instead of simple router (this might impact user-plane latency). Only IP traffic to predefined IP-addresse

49、s/ports from predefined addresses/ports would be allowed between Iu-PS and Gn networks. Considering network security, a firewall can be deployed between the RNC and the IP network. For an ATM based Iu-PS, the ATM connection needs to be terminated and “interworked“ to IP. The location of the interworking may be within the Iu-PS network or at the edge of the Iu-PS network. Figure 6-2 shows the connectivity between the Iu-PS network and the Gn (backbone) network. Figure 6-2: Connectivity with Iu-PS ETSI ETSI TR 123 919 V14.0.0 (2017-05)93GPP TR 23.919 vers