ETSI TR 125 952-2003 Universal Mobile Telecommunications System (UMTS) Base Station Classification (TDD)《全球移动通信系统(UMTS) 基站分类(TDD)3GPP TR 25 952(版本5 2 0 第5次发布)》.pdf

1、ETSI TR 125 952 V5.2.0 (2003-03) Technical Repor Universal Mobile Telecommunications System (UMTS); Base Station classification (TDD) (3GPP TR 25.952 version 5.2.0 Release 5) 3GPP TR 25.952 version 5.2.0 Release 5 1 ETSI TR 125 952 V5.2.0 (2003-03) Reference RTR/TSGR-0425952520 Keywords U MTS ETSI 6

2、50 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be do

3、wnloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the refer

4、ence shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents

5、is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in

6、all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPP

7、TM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TR 25.952 version 5.2.0 Release 5 2 ETSI TR 125 952 V5.2.0 (2003-03) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been decl

8、ared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which i

9、s available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partners

10、hip Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI ident

11、ities can be found under ht tn : Nweb ann. et si. og;kev/aiiervfom. asn . ETSI 3GPP TR 25.952 version 5.2.0 Release 5 3 ETSI TR 125 952 V5.2.0 (2003-03) Contents Intellectual Property Rights 2 Foreword . 2 Foreword . 5 1 2 3 3.1 3.2 3.3 4 5 5.1 5.1.1 5.2 5.2.1 5.3 5.3.1 5.4 6 6.1 7 7.1 7.1.1 7.1.2 S

12、cope 6 References 6 Definitions. symbols and abbreviations . 6 Definitions 6 Symbols 6 Abbreviations . 6 General . 6 System scenarios 7 Indoor Environment . 7 Path Loss Model . 7 Mixed Indoor Outdoor Environment . 7 Propagation Model 7 Minimum coupling loss (MCL) 9 MCL for Local Area scenario . 9 Pr

13、opagation conditions for local area base stations 9 Base station classes 9 Base station class criteria . 9 Changes with respect to Release 99 . 10 Changes in 25.105 10 7.1.2.1 7.1.2.2 7.1.3 7.1.3.1 7.1.4 7.1.5 7.1.5.1 7.1.5.1.1 7.1.5.1.2 7.1.5.1.2.1 7 . 7 . 7 . 7 . 7 . .5.1. 2.2 .5. 1.3 .5.1. 3.1 .5

14、.1. 3.2 . 5.2 7.1.5.2.1 7.1.5.2.2 7.1.5.2.2.1 7.1.5.2.2.2 New text for base station classes New text for frequency s Minimum Requirement 11 Spectrum emission mask 11 10 10 10 11 Transmit OdOff Time Mask 11 11 11 11 Additional requirement for operation in the same geographic area with FDD or unsynchr

15、onised TDD on adjacent channels . 12 Additional requirement for operation in the same geographic area with unsynchronised TDD on adjacent channels . 12 Additional requirement for operation in the same geographic area with FDD on adjacent channels . 12 Additional requirement in case of Co-siting with

16、 unsynchronised TDD BS or FDD BS operating on an adjacent channel . 13 Additional requirement in case of Co-siting with unsynchronised TDD BS operating on an adjacent channel . 13 Additional requirement in case of Co-siting with FDD BS operating on an adjacent channel . 13 New text for Adjacent Chan

17、nel Leakage power Ratio (ACLR) 13 Minimum Requirement . 14 Additional requirement for operation in the same geographic area with FDD or unsynchronised TDD on adjacent channels . 14 Additional requirement for operation in the same geographic area with unsynchronised TDD on adjacent channels . 14 Addi

18、tional requirement for operation in the same geographic area with FDD on adjacent channels . 14 ETSI 3GPP TR 25.952 version 5.2.0 Release 5 4 ETSI TR 125 952 V5.2.0 (2003-03) 7.1.5.2.3 7.1.5.2.3.1 7.1.5.2.3.2 7.1.6 7.1.6.1 7.1.7 7.1.7.1 7.1.8 7.1.8.1 7.1.8.1.1 7.1.8.1.2 7.1.8.1.3 7.1.8.1.4 7.1.8.2 7

19、.1.8.3 7.1.9 7.1.9.1 7.1.9.1.1 7.1.10 7.1.10.1 7.1.10.1.1 7.1.10.2 7.1.10.3 7.1.11 7.1.11.1 7.1.12 7.1.12.1 7.1.12.1.1 7.1.12.1.2 7.1.12.2 7.1.12.2.1 Additional requirement in case of Co-siting with unsynchronised TDD BS or FDD BS operating on an adjacent channel 15 Additional requirement in ca Addi

20、tional requirement in case of Co-siting with FDD B channel . New text for reference sensitivity level Minimum Requirement . New text for adjacent channel selectivity (ACS) Minimum Requirement . Blocking and Intermodulation Characteristics Justification . adjacent channel . . 15 . 15 . 16 . 16 . 16 .

21、 16 Simulation Description 16 Simulation Results. 17 Local Area BS Receiver Blocking . 19 Local Area BS Receiver Blocking . 19 New text for blocking characteristics 19 New text for intermodulation characteristics 20 New text for demodulation in static propagation CO 21 Demodulation of DCH 21 New tex

22、t for demodulation of DCH in multipath fad . 21 Multipath fading Case 1 21 Multipath fading Case 2 Multipath fading Case 3 Transmitter spurious emissions . . Operation of TDD Local Area BS and FDD BS in the same geographic area . Minimum requirement . 21 Minimum requirement . . . . New text for rece

23、iver dynamic range Minimum requirement Justification . Co-location of TDD Local Area BS and FDD BS Co-existence with UTRA-FDD . . New text for transmitter spurious e Operation in the same geographic area . .23 . 23 7.1.12.2.1.1.1 Minimum Requirement . .24 .24 7.2 Changes in 25.123 . 7.2.1 New text f

24、or Performance easurements in uplink (RX) .24 .24 .24 7.2.1.1.2 Relative accuracy requirements .24 . .24 7.2.1.1.3 Range/mapping .25 7.2.1.2.1 Absolute accuracy requirements. . 25 . . 25 7.2.1.2.2 Rangelmapping 7.2.1.3 Received total wide b . . 25 7.2.1.3.1 Absolute accuracy requirements . 26 . 26 7

25、.2.2 measurement performance for UTRAN . . 26 . 26 . 27 7.3 Changes in 25.142 . Impacts to other WGs . 27 .27 .27 .27 7.1.12.2.1.1 7.1.12.2.1.2 7.2.1.1 RSCP. . 7.2.1.1.1 7.2.1.2 Timeslot ISCP 7.2.1.3.2 . 7.2.2.1 UTRAN RX measurements . 8 8.1 WG1 8.2 WG2 8.3 WG3 9 Backward compatibility .27 Annex A (

26、informative): Change history . 28 History . .29 ETSI 3GPP TR 25.952 version 5.2.0 Release 5 5 ETSI TR 125 952 V5.2.0 (2003-03) Foreword This Technical Specification has been produced by the 3d Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work

27、within the TSG and may change following formal TSG approval. Should the TSG modiSl the contents of the present document, it will be re-released by the TSG with an identiSling change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to T

28、SG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes

29、 have been incorporated in the document. ETSI 3GPP TR 25.952 version 5.2.0 Release 5 6 ETSI TR 125 952 V5.2.0 (2003-03) 1 Scope This document is a Technical Report on Release 5 work item “TDD Base Station Classification“ 2 Re fe re nces The following documents contain provisions which, through refer

30、ence in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version ap

31、plies. il 21 31 41 51 3GPP TS 25.105 “UTRA (BS) TDD; Radio transmission and Reception“ 3GPP TS 25.123 “Requirements for Support of Radio Resources Management (TDD)“ 3GPP TS 25.142 “Base station conformance testing (TDD)“ 3GPP TR 25.942 “RF System Scenarios“ UMTS 30.03 / TR 101 112: “Selection proced

32、ures for the choice of radio transmission technologies of the UMTS“ 3 Definitions, symbols and abbreviations 3.1 De fi nit ions void 3.2 Symbols void 3.3 Abbreviations void 4 General Current TSG RAN WG4 specifications have been done according to the requirements for the macrocell base stations (Node

33、Bs). For the UTRA evolution requirement specifications for other types of base stations are needed as well to take into account different use scenarios and radio environments. In this technical report, base station classification is described and requirements for each base station class are derived.

34、 ETSI 3GPP TR 25.952 version 5.2.0 Release 5 7 ETSI TR 125 952 V5.2.0 (2003-03) 5 System scenarios This section describes the system scenarios for UTRA operation that are considered when defining base station classes. It also includes typical radio parameters that are used to derive requirements. 5.

35、1 Indoor Environment 5.1 .I Path Loss Model The indoor path loss model expressed in dB is in the following form, which is derived from the COST 23 1 indoor model: L = 37 + 20 Loglo(R) + C kwi L, + 18.3 n(n+2)(n+1)-o.46) where: R = transmitter-receiver separation given in metres k, = number of penetr

36、ated walls of type i Lwi = loss of wall type i n = number of penetrated floors Two types of internal walls are considered. Light internal walls with a loss factor of 3.4 dB and regular internal walls with a loss factor of 6.9 dB. If internal walls are not modelled individually, the indoor path loss

37、model is represented by the following formula: L = 37 + 30 Loglo) + 18.3 n(n+2)(n+1)-0.46) where: R = transmitter-receiver separation given in metres; n = number of penetrated floors Slow fading deviation in pico environment is assumed to be 6 dB. 5.2 Mixed Indoor - Outdoor Environment 5.2.1 Propaga

38、tion Model Distance attenuation inside a building is a pico cell model as defined in Chapter 5.1.1. In outdoors UMTS30.03 model is used. Attenuation from outdoors to indoors is sketched in Figure 5.1 below. In the figure star denotes receiving object and circle transmitting object. Receivers are pro

39、jected to virtual positions. Attenuation is calculated using micro propagation model between transmitter and each virtual position. Indoor attenuation is calculated between virtual transmitters and the receiver. Finally, lowest pathloss is selected for further calculations. Only one floor is conside

40、red. The total pathloss between outdoor transmitter and indoor receiver is calculated as L = L + Low + C k, Lwi + a * R , where: Lmicro = Micro cell pathloss according UMTS30.03 Outdoor to Indoor and Pedestrian Test Environment pathloss model Low = outdoor wall penetration loss dB ETSI 3GPP TR 25.95

41、2 version 5.2.0 Release 5 8 Parameter Inside wall loss Outside wall loss Slow fading deviation in indoors Slow fading deviation in outdoors Building size Street size Room size Number of rooms Corridor size ETSI TR 125 952 V5.2.0 (2003-03) Value 6.9dB 10 dB 6dB 6dB 11 O x 11 O meters 1 1 O x 15 meter

42、s 22 x 25 meters 5 rooms in 4 rows 110x5meters R = is the virtual transmitter-receiver separation given in metres; k-= number of penetrated walls of type i; LWi= loss of wall type i; a = 0.8 attenuation dB/m Slow fading deviation in mixed pico-micro environment shall be 6 dB Propagation from indoors

43、 to outdoors would be symmetrical with above models. Size of entrance point Number of base stations BS coordinates Figure 5.1 : Simulation scenario and propagation model. Parameters related to propagation models are summarised in Table 5.1. 5 meters 4 6 tba Table 5.1: Parameters related to mixed ind

44、oor - outdoor propagation model Number of corridors I 2 ETSI 3GPP TR 25.952 version 5.2.0 Release 5 9 MS e MS Local area BS e MS Local area BS e Local area BS ETSI TR 125 952 V5.2.0 (2003-03) MCL 40 dB 45 dB 45 dB 5.3 Minimum coupling loss (MCL) Minimum Coupling Loss (MCL) is defined as the minimum

45、distance loss including antenna gain measured between antenna connectors. 5.3.1 MCL for Local Area scenario The minimum coupling loss between UEs is independent of the scenario, therefore the same minimum coupling loss is assumed for all environments. Local area BSs are usually mounted under the cei

46、ling, on wall or some other exposed position. In 4 chapter 4.1.1.2 a minimal separation of 2 metres between UE and indoor BS is assumed. Free space path loss is defiied in 4 as: Path loss dB = 38.25 + 20 loglO(d m) Taking into account O dBi antenna gain for Local area BS and UE and a body loss of 1

47、dB at the terminal, a MCL of 45.27 dB is obtained. The additional 2 dB cable loss at the BS as proposed in TR 25.942 is not considered. The assumed MCL values are summarised in Table 5.2. Table 5.2: Minimum Coupling Losses 5.4 Propagation conditions for local area base stations The demodulation of D

48、CH in multipath fading conditions in TS 25.105 considers three different test environments: Case 1 : Typical indoor environment delay spread, low terminal speed Case 2: Large delay spread (12 us), low terminal speed Case 3: Typical vehicular environment delay spread, high terminal speed (120 km/h) T

49、he local area BS is intended for small cells as can be usually found in indoor environments or outdoor hot spot areas. The large delay spread in Case 2 and the high terminal speed in Case 3 are not typical for these scenarios. Therefore, requirements defined for Case 2 and Case 3 shall not be applied to the local area BS. The Case 1 propagation condition shall apply for both the local area and wide area BS. 6 Base station classes This section describes how the base station classes are defined. 6.1 Base station class criteria Different sets