ETSI TR 129 994-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Recommended infrastructure measures to overco.pdf

1、 ETSI TR 129 994 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Recommended infrastructure measures to overcome specific Mobile Station (MS) and User Equipment (UE) faults (3GPP TR 29.994 version 14.0.0 Release 1

2、4) TECHNICAL REPORT ETSI ETSI TR 129 994 V14.0.0 (2017-04)13GPP TR 29.994 version 14.0.0 Release 14Reference RTR/TSGC-0129994ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 7

3、42 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic a

4、nd/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) versi

5、on kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableSta

6、tus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photoc

7、opying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 20

8、17. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit

9、of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 129 994 V14.0.0 (2017-04)23GPP TR 29.994 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI.

10、 The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available

11、 from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3

12、14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using thei

13、r 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the pre

14、sent document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in

15、direct citation. ETSI ETSI TR 129 994 V14.0.0 (2017-04)33GPP TR 29.994 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Abbreviations . 6g34 General . 6g35 Specific implementation on the radio interf

16、ace 7g35.1 Handovers and “Synchronisation Indication“ . 7g35.1.1 Justification . 7g35.1.2 Solution . 7g35.2 “Directed Retry“ type Handovers . 7g35.2.1 Justification . 7g35.2.2 Solution . 7g35.3 Cell broadcast and frequency hopping . 8g35.3.1 Justification . 8g35.3.2 Solution . 8g35.4 Handling of Pha

17、se 2 and Phase 2+ BCCH Messages . 8g35.4.1 Justification . 8g35.4.2 Solution . 8g35.5 Handling of Phase 2 and Phase 2+ SACCH Messages . 9g35.5.1 Justification . 9g35.5.2 Solution . 9g35.6 Handling of assignment message using Mobile Allocation IE including ARFCN=0 9g35.6.1 Justification . 9g35.6.2 So

18、lution . 9g35.7 Hopping sequence generation including ARFCN=0 9g35.7.1 Justification . 9g35.7.2 Solution . 9g35.8 QoS IE length between R97 and R99 implementations . 10g35.8.1 Justification . 10g35.8.2 Solution . 10g35.9 MS unable to handle the LOCATION UPDATING ACCEPT, ATTACH ACCEPT and ROUTING ARE

19、A UPDATE ACCEPT messages when the EPLMN Lists IE is included 10g35.9.1 Justification . 10g35.9.2 Solution . 10g35.10 MS unable to handle messages when the truncation function is used 11g35.10.1 Justification . 11g35.10.2 Solution . 11g35.11 Roaming restrictions issues with reject cause #13 and #15 1

20、1g35.11.1 Justification . 11g35.11.2 Solution . 12g36 Use of VAD/DTX in conjunction with frequency hopping for a speech call 12g36.1 Scope 12g36.2 General . 12g36.3 Implementation options to reduce the occurance of undetected bad frames by utilising normal system features . 13g36.3.1 Number of frequ

21、ency hopping channels . 13g36.3.2 Frequency hopping type 13g36.3.3 Continuous SID frames on C0 13g3ETSI ETSI TR 129 994 V14.0.0 (2017-04)43GPP TR 29.994 version 14.0.0 Release 146.4 Implementation options to reduce the occurance of undetected bad frames by changing normal system operation . 14g36.4.

22、1 Changing the training sequence of the dummy burst to a new (ninth) training sequence . 14g36.4.2 Using an alternative training sequence out of the eight assigned 14g36.4.3 Setting the stealing flag for the bits transmitted which are not intended to be part of the TCH . 14g36.4.4 Sending partial SI

23、D frames on C0 14g36.5 Tested Combinations 14g36.5.1 “Normal“ system. 15g36.5.2 New training sequence 15g36.5.3 Alternative training sequence from the eight assigned . 15g36.5.4 Setting stealing flag for unintentionally transmitted bits 15g36.5.5 Setting stealing flag for unintentionally transmitted

24、 bits and modifying training sequence for Dummy Bursts 16g36.5.6 Sending partial SID information on C0 16g3Annex A: Amendment Request 08.08 - 021 R4: Information on channel in use in HO REQUEST . 17g3A.3.1.5.1.1 Generation of the HANDOVER REQUIRED message 17g3A.3.1.5.2 Handover Resource allocation 1

25、8g3A.3.1.5.2.1 Operation of the procedure 18g3A.3.2.1.8 HANDOVER REQUEST . 19g3A.3.2.1.9 HANDOVER REQUIRED . 20g3A.3.2.2.49 CURRENT CHANNEL 21g3Annex B: Change History . 23g3History 24g3ETSI ETSI TR 129 994 V14.0.0 (2017-04)53GPP TR 29.994 version 14.0.0 Release 14Foreword This Technical Specificati

26、on has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an

27、 identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all

28、changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 129 994 V14.0.0 (2017-04)63GPP TR 29.994 version 14.0.0 Release 141 Scope The present document clarifies rec

29、ommended measures which may be adopted by 3GPP infrastructure utilising GSM or GERAN as access network to enable inter-working to be obtained between network and various User Equipment (UE) implementations of the 3GPP specification. The objective is to obtain compatibility without changing the conso

30、lidated set of specifications. The present document describes the recommended changes to the infrastructure to cater for specific faults within some types of UE. The lifetime of the herein described measures together with their potential impact on optimal network performance is out of the scope of t

31、he present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific

32、reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present docum

33、ent. 1 3GPP TR 21.905: “ Vocabulary for 3GPP Specifications“. 2 3GPP TS 04.08 (Phase 1): “Mobile radio interface layer 3 specification Part 1: Generic“. 3 3GPP TS 04.08 (Phase 2): “Mobile radio interface layer 3 specification“. 4 3GPP TS 04.08 (Phase 2+): “Mobile radio interface layer 3 specificatio

34、n“. 5 3GPP TS 05.05 (Phase 2): “Radio Performance Aspects. 6 3GPP TS 05.05 (Phase 2+): “Radio Performance Aspects. 7 3GPP TS 24.007: “Mobile radio interface signalling layer 3 General aspects“. 8 3GPP TS 24.008: “Mobile radio interface layer 3 specification Core Network Protocols-Stage 3“. 9 3GPP TS

35、 23.107: “Quality of Service, Concept and Architecture“. 10 3GPP TS 44.018: “Mobile radio interface layer 3 specification, Radio Resource Control (RRC) protocol“. 3 Abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905 1. 4 General In the implementation of the standar

36、d it has been found that some aspects of the specifications have been mis-interpreted by some MS manufacturers. These MSs require specific implementations of the Phase 1 standard in the infrastructure, to provide completely compatible interworking. It has been assumed throughout this TR that Phase 2

37、 and later infrastructure will interwork with Phase 1 MSs in the same way as Phase 1 infrastructure. ETSI ETSI TR 129 994 V14.0.0 (2017-04)73GPP TR 29.994 version 14.0.0 Release 14The remainder of this TR describes how to overcome the possible impacts of the above factors. Descriptions given are lim

38、ited to specific implementations which are permissible for the Phase of the infrastructure. 5 Specific implementation on the radio interface This clause deals with the choice of specific infrastructure implementation options of the protocols at the radio interface. The protocols concerned are define

39、d in 3GPP TS 04.08 Phase 1 2, Phase 2 3 and Phase 2+ 4. The corresponding protocol definitions for R99 and later releases are in 3GPP TS 24.007 7 and 3GPP TS 24.008 8. 5.1 Handovers and “Synchronisation Indication“ 5.1.1 Justification In the HANDOVER COMMAND message there is a mandatory part consist

40、ing of nine octets followed by several optional information elements. The first optional information element is Synchronisation Indication which is a type 1 Information Element (IE) and as such is coded, with IE Identifier (IEI), on one octet. Other optional IE follow the Synchronisation Indication

41、IE and are used to: - indicate the frequency hopping sequence to use on the new channel; - indicate the channel mode for the new channel; - indicate a start time. Some types of MS do not correctly decode these following information elements if the Synchronisation Indication information element is om

42、itted. 5.1.2 Solution To ensure correct operation the infrastructure should always send the Synchronisation Indication IE to a Phase 1 MS. NOTE: In a few cases this will force an extra layer 2 segment to be sent to the MS. 5.2 “Directed Retry“ type Handovers 5.2.1 Justification In the HANDOVER COMMA

43、ND message there is an optional Channel Mode Information Element. When this information element is included in the handover command the MS should go to the new channel mode when it hands over to the new channel. This information element may be used for “directed retry“ type handovers where a cell ha

44、s an MS on a control channel but has no available traffic channel for the MS to use. The network may then choose to handover the MS to a new cell with traffic channel (TCH) capacity and change the channel mode at the same time. Some MSs appear to accept the handover command, from Stand-alone Dedicat

45、ed Control Channel (SDCCH) to TCH with speech mode, and make the required channel and mode change but do not through connect the speech path. 5.2.2 Solution To ensure correct operation, of these MSs, the infrastructure should always initiate a channel mode change procedure according to 3GPP TS 04.08

46、 (Phase 1) 2 clause 3.4.6 once the MS has arrived at the new channel following a handover of a Phase 1 MS involving a channel mode change to full rate speech. The additional channel mode change procedure shall only be performed for a directed retry handover to a full rate speech channel, and not for

47、 a data channel. First this will save performance in these cases, and secondly some MSs will release the call with this additional and unnecessary channel mode change procedure in case of fax or data calls. ETSI ETSI TR 129 994 V14.0.0 (2017-04)83GPP TR 29.994 version 14.0.0 Release 14For internal i

48、ntra-Base Station System (BSS) handovers, this decision to initiate channel mode modify is taken by the BSS concerned. For external intra-BSS and inter-BSS handovers, the new BSS must know that there has been a change of mode from the previous BSS and that therefore a channel mode change procedure m

49、ust be executed. The communication of this information is achieved by using the “current channel“ element in the HANDOVER REQUEST and HANDOVER REQUIRED message as described in the Annex A. In the case of external handover, the following will ensure correct operation with mobiles suffering from fault 5.2.1: i) The change described in Annex A shall be implemented by the MSC and BSS concerned. ii) The new BSS, after receiving a HANDOVER REQUEST containing a current channel IE indicating “signalling only“, and a channel type indicating ful