ETSI TR 134 902-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Derivation of test tolerances for multi-cell Radio Reso3 .pdf

1、 ETSI TR 1Digital cellular telecommUniversal Mobile TelDerivation of test tolerManagemen(3GPP TR 34.9floppy3TECHNICAL REPORT 134 902 V11.2.0 (2016mmunications system (Phase elecommunications System (lerances for multi-cell Radio Rent (RRM) conformance tests .902 version 11.2.0 Release 11GLOBAL SYSTE

2、MOBILE COMMUN16-05) e 2+) (GSM); (UMTS); o Resource ts 11) TEM FOR ICATIONSRETSI ETSI TR 134 902 V11.2.0 (2016-05)13GPP TR 34.902 version 11.2.0 Release 11Reference RTR/TSGR-0534902vb20 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax:

3、 +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versi

4、ons and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is t

5、he print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is avail

6、able at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by a

7、ny means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media

8、. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational

9、 Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 134 902 V11.2.0 (2016-05)23GPP TR 34.902 version 11.2.0 Release 11Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The

10、 information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available fro

11、m the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (

12、or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3G

13、PP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present

14、 document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables ex

15、cept when used in direct citation. ETSI ETSI TR 134 902 V11.2.0 (2016-05)33GPP TR 34.902 version 11.2.0 Release 11Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 9g31 Scope 10g32 References 10g33 Definitions, symbols and abbreviations . 10g33.1 Definition

16、s 10g33.2 Symbols 11g33.3 Abbreviations . 11g34 General Principles 11g34.1 Principle of Superposition 11g34.2 Sensitivity analysis . 11g34.3 Statistical combination of uncertainties 11g34.4 Correlation between uncertainties 12g34.4.1 Uncorrelated uncertainties 12g34.4.2 Positively correlated uncerta

17、inties 13g34.4.3 Negatively correlated uncertainties . 14g34.4.4 Treatment of uncorrelated uncertainties . 14g34.4.5 Treatment of positively correlated uncertainties with adverse effect 14g34.4.6 Treatment of positively correlated uncertainties with beneficial effect 15g34.4.7 Treatment of negativel

18、y correlated uncertainties 15g35 One frequency multi-cell FDD tests . 15g35.1 Test 8.2.2.1 Cell reselection in idle mode, one frequency 15g35.1.1 Minimum requirements . 15g35.1.2 Test requirement guidelines 16g35.1.3 Uncertainty parameter set . 17g35.1.4 Assumptions . 17g35.1.5 Calculation of test r

19、equirements . 17g35.1.5.1 Sensitivity analysis 17g35.1.5.2 Superposition of uncertainty effects 18g35.1.5.3 Derivation of equations for Ior(n) . 18g35.1.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 19g35.1.5.5 Prediction of spread in critical parameters 19g35.1.5.6 Determination of

20、 final Cell 1 and Cell 2 CPICH offsets . 19g35.1.5.7 Determination of Cell 3, Cell 4, Cell 5 and Cell 6 CPICH offsets 20g35.1.6 Check against test requirement guidelines 20g35.2 Test 8.3.1 FDD/FDD Soft Handover 21g35.2.1 Minimum requirements . 21g35.2.2 Test requirement guidelines 22g35.2.3 Uncertai

21、nty parameter set . 22g35.2.4 Assumptions . 22g35.2.5 Calculation of test requirements . 23g35.2.5.1 Sensitivity analysis 23g35.2.5.2 Superposition of uncertainty effects 23g35.2.5.3 Derivation of Ior(n) . 24g35.2.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 24g35.2.5.5 Prediction

22、of spread in critical parameters 24g35.2.5.6 Determination of final Cell 1 and Cell 2 CPICH offsets . 24g35.2.6 Check against test requirement guidelines 24g35.3 Test 8.3.2.1 FDD/FDD Hard Handover to intra-frequency cell . 25g35.3.1 Minimum requirements . 25g3ETSI ETSI TR 134 902 V11.2.0 (2016-05)43

23、GPP TR 34.902 version 11.2.0 Release 115.3.2 Test requirement guidelines 26g35.3.3 Uncertainty parameter set . 26g35.3.4 Assumptions . 27g35.3.5 Calculation of test requirements . 27g35.3.5.1 Sensitivity analysis 27g35.3.5.2 Superposition of uncertainty effects 28g35.3.5.3 Derivation of Ior(n) . 28g

24、35.3.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 28g35.3.5.5 Prediction of spread in critical parameters 28g35.3.5.6 Determination of final Cell 1 and Cell 2 CPICH offsets . 29g35.3.6 Check against test requirement guidelines 29g35.4 Test 8.3.5.1 Cell reselection in CELL_FACH, one

25、 frequency . 30g35.4.1 Minimum requirements . 30g35.4.2 Test requirement guidelines 30g35.4.3 Uncertainty parameter set . 30g35.4.4 Assumptions . 30g35.4.5 Calculation of test requirements . 30g35.4.6 Check against test requirement guidelines 30g35.5 Test 8.3.6.1 Cell reselection in CELL_PCH, one fr

26、equency 30g35.5.1 Minimum requirements . 30g35.5.2 Test requirement guidelines 30g35.5.3 Uncertainty parameter set . 30g35.5.4 Assumptions . 30g35.5.5 Calculation of test requirements . 31g35.5.6 Check against test requirement guidelines 31g35.6 Test 8.3.7.1 Cell reselection in URA_PCH, one frequenc

27、y . 31g35.6.1 Minimum requirements . 31g35.6.2 Test requirement guidelines 31g35.6.3 Uncertainty parameter set . 31g35.6.4 Assumptions . 31g35.6.5 Calculation of test requirements . 31g35.6.6 Check against test requirement guidelines 31g35.7 Void 31g35.8 Test 8.6.1.1 Event triggered reporting in AWG

28、N propagation conditions (R99) . 31g35.8.1 Minimum requirements . 31g35.8.2 Test requirement guidelines 32g35.8.3 Uncertainty parameter set . 33g35.8.4 Assumptions . 33g35.8.5 Calculation of test requirements . 33g35.8.5.1 Sensitivity analysis 33g35.8.5.2 Superposition of uncertainty effects 34g35.8

29、.5.3 Derivation of Ior(n) . 35g35.8.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 35g35.8.5.5 Prediction of spread in critical parameters 35g35.8.5.6 Determination of final Cell 1 and Cell 2 CPICH offsets . 35g35.8.6 Check against test requirement guidelines 35g35.8A Test 8.6.1.1A E

30、vent triggered reporting in AWGN propagation conditions (Rel-4 and later) . 36g35.8A.1 Minimum requirements . 36g35.8A.2 Test requirement guidelines 37g35.8A.3 Uncertainty parameter set . 38g35.8A.4 Assumptions . 38g35.8A.5 Calculation of test requirements . 38g35.8A.5.1 Sensitivity analysis 38g35.8

31、A.5.2 Superposition of uncertainty effects 39g35.8A.5.3 Derivation of Ior(n) . 39g35.8A.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 39g35.8A.5.5 Prediction of spread in critical parameters 39g35.8A.5.6 Determination of final Cell 1 and Cell 2 CPICH offsets . 40g35.8A.6 Check again

32、st test requirement guidelines 40g35.9 Test 8.6.1.2 Event triggered reporting of multiple neighbours in AWGN propagation condition (R99) . 41g35.9.1 Minimum requirements . 41g35.9.2 Test requirement guidelines 43g3ETSI ETSI TR 134 902 V11.2.0 (2016-05)53GPP TR 34.902 version 11.2.0 Release 115.9.3 U

33、ncertainty parameter set . 44g35.9.4 Assumptions . 44g35.9.5 Calculation of test requirements . 45g35.9.5.1 Sensitivity analysis 45g35.9.5.2 Superposition of uncertainty effects 45g35.9.5.3 Derivation of Ior(n) . 46g35.9.5.4 Determination of initial Cell 1, Cell 2 and Cell 3 CPICH offsets . 46g35.9.

34、5.5 Prediction of spread in critical parameters 46g35.9.5.6 Determination of final Cell 1, Cell 2 and Cell 3 CPICH offsets . 46g35.9.6 Check against test requirement guidelines 46g35.9A Test 8.6.1.2A Event triggered reporting of multiple neighbours in AWGN propagation condition (Rel-4 and later) . 4

35、8g35.9A.1 Minimum requirements . 48g35.9A.2 Test requirement guidelines 50g35.9A.3 Uncertainty parameter set . 51g35.9A.4 Assumptions . 51g35.9A.5 Calculation of test requirements . 51g35.9A.5.1 Sensitivity analysis 51g35.9A.5.2 Superposition of uncertainty effects 52g35.9A.5.3 Derivation of Ior(n)

36、. 52g35.9A.5.4 Determination of initial Cell 1, Cell 2 and Cell 3 CPICH offsets . 53g35.9A.5.5 Prediction of spread in critical parameters 53g35.9A.5.6 Determination of final Cell 1, Cell 2 and Cell 3 CPICH offsets . 53g35.9A.6 Check against test requirement guidelines 53g35.10 Test 8.6.1.3 Event tr

37、iggered reporting of two detectable neighbours in AWGN propagation condition (R99) 54g35.10.1 Minimum requirements . 54g35.10.2 Test requirement guidelines 57g35.10.3 Uncertainty parameter set . 58g35.10.4 Assumptions . 58g35.10.5 Calculation of test requirements . 58g35.10.5.1 Sensitivity analysis

38、58g35.10.5.2 Superposition of uncertainty effects 59g35.10.5.3 Derivation of Ior(n) . 60g35.10.5.4 Determination of initial Cell 1, Cell 2 and Cell 3 CPICH offsets . 60g35.10.5.5 Prediction of spread in critical parameters 60g35.10.5.6 Determination of final Cell 1, Cell 2 and Cell 3 CPICH offsets .

39、 60g35.10.6 Check against test requirement guidelines 60g35.10A Test 8.6.1.3A Event triggered reporting of two detectable neighbours in AWGN propagation condition (Rel-4 and later) . 61g35.10A.1 Minimum requirements . 61g35.10A.2 Test requirement guidelines 63g35.10A.3 Uncertainty parameter set . 64

40、g35.10A.4 Assumptions . 64g35.10A.5 Calculation of test requirements . 65g35.10A.5.1 Sensitivity analysis 65g35.10A.5.2 Superposition of uncertainty effects 65g35.10A.5.3 Derivation of Ior(n) . 66g35.10A.5.4 Determination of initial Cell 1, Cell 2 and Cell 3 CPICH offsets . 66g35.10A.5.5 Prediction

41、of spread in critical parameters 66g35.10A.5.6 Determination of final Cell 1, Cell 2 and Cell 3 CPICH offsets . 66g35.10A.6 Check against test requirement guidelines 66g35.11 Test 8.6.1.4 Correct reporting of neighbours in fading propagation condition (R99) 67g35.11A Test 8.6.1.4A Correct reporting

42、of neighbours in fading propagation condition (Rel-4 and later) 68g35.11A.1 Minimum requirements . 68g35.11A.2 Test requirement guidelines 68g35.11A.3 Uncertainty parameter set . 69g35.11A.4 Assumptions . 69g35.11A.5 Calculation of test requirements . 69g35.11A.5.1 Sensitivity analysis 69g35.11A.5.2

43、 Superposition of uncertainty effects 70g35.11A.5.3 Derivation of Ior(n) . 71g3ETSI ETSI TR 134 902 V11.2.0 (2016-05)63GPP TR 34.902 version 11.2.0 Release 115.11A.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 71g35.11A.5.5 Prediction of spread in critical parameters 71g35.11A.5.6 D

44、etermination of final Cell 1 and Cell 2 CPICH offsets . 71g35.11A.6 Check against test requirement guidelines 71g35.12 Test 8.6.1.5 Event triggered reporting of multiple neighbour cells in Case 1 fading conditions 72g35.12.1 Minimum requirements . 72g35.12.2 Test requirement guidelines 73g35.12.3 Un

45、certainty parameter set . 74g35.12.4 Assumptions . 74g35.12.5 Calculation of test requirements . 74g35.12.5.1 Sensitivity analysis 75g35.12.5.2 Superposition of uncertainty effects 75g35.12.5.3 Derivation of Ior(n) . 76g35.12.5.4 Determination of initial Cell 1, Cell 2, Cell 3 and Cell 4 CPICH offse

46、ts 76g35.12.5.5 Prediction of spread in critical parameters 76g35.12.5.6 Determination of final Cell 1, Cell 2, Cell 3 and Cell 4 CPICH offsets 76g35.12.6 Check against test requirement guidelines 76g35.13 Test 8.6.1.6 Event triggered reporting of multiple neighbour cells in Case 3 fading conditions

47、 77g35.13.1 Minimum requirements . 77g35.13.2 Test requirement guidelines 78g35.13.3 Uncertainty parameter set . 79g35.13.4 Assumptions . 79g35.13.5 Calculation of test requirements . 79g35.13.5.1 Sensitivity analysis 79g35.13.5.2 Superposition of uncertainty effects 80g35.13.5.3 Derivation of Ior(n

48、) . 80g35.13.5.4 Determination of initial Cell 1, Cell 2, Cell 3 and Cell 4 CPICH offsets 80g35.13.5.5 Prediction of spread in critical parameters 81g35.13.5.6 Determination of final Cell 1, Cell 2, Cell 3 and Cell 4 CPICH offsets 81g35.13.6 Check against test requirement guidelines 81g36 Two freque

49、ncy multi-cell FDD tests 82g36.1 Test 8.2.2.2 Cell reselection in idle mode, two frequencies . 82g36.1.1 Minimum requirements . 82g36.1.2 Test requirement guidelines 83g36.1.3 Uncertainty parameter set . 84g36.1.4 Assumptions . 85g36.1.5 Calculation of test requirements . 85g36.1.5.1 Sensitivity analysis 85g36.1.5.2 Superposition of uncertainty effects 86g36.1.5.3 Derivation of equations for Ior(n) . 86g36.1.5.4 Determination of initial Cell 1 and Cell 2 CPICH offsets . 87g36.1.5.5 Prediction of spread in critical parameters 87g36.1.5.6 Determination of final Cell 1 and Cell