ETSI TR 136 905-2016 LTE Evoolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Derivation of test points for radio t.pdf

1、 ETSI TR 1Evolved Universal Tand EvolvRadio AccDerivation of test pointsconfo(3GPP TR 36.9floppy3 TECHNICAL REPORT 136 905 V12.1.0 (2016LTE; l Terrestrial Radio Access (E-ed Universal Terrestrial ccess Network (E-UTRAN); nts for radio transmission andnformance test cases .905 version 12.1.0 Release

2、1216-05) UTRA) nd reception 12) ETSI ETSI TR 136 905 V12.1.0 (2016-05)13GPP TR 36.905 version 12.1.0 Release 12Reference RTR/TSGR-0536905vc10 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NA

3、F 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electroni

4、c and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) ve

5、rsion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.as

6、p If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

7、and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All

8、 rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered

9、and owned by the GSM Association. ETSI ETSI TR 136 905 V12.1.0 (2016-05)23GPP TR 36.905 version 12.1.0 Release 12Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is

10、 publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the

11、 ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be

12、, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These sho

13、uld be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “ma

14、y“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 136 905 V12

15、.1.0 (2016-05)33GPP TR 36.905 version 12.1.0 Release 12Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Symbols 5g33.3 Abbreviations . 5g34 Test coverage ana

16、lysis 6g34.1 Test point selection in Additional Maximum Power Reduction (A-MPR) test cases. 6g34.1.1 A-MPR test case for single carrier 6g34.1.2 A-MPR test case for intra-band contiguous UL CA . 6g34.1.3 A-MPR test case for inter-band UL CA 6g34.2 Test frequency and bandwidth selection in Reference

17、sensitivity test cases 7g34.2.1 Reference sensitivity level for single carrier . 7g34.2.2 Reference sensitivity level for intra-band contiguous CA 7g34.2.3 Reference sensitivity level for inter-band CA . 8g34.2.4 Reference sensitivity level for intra-band non-contiguous CA . 8g34.2.5 Reference sensi

18、tivity level for 3DL CA 8g34.2.5.1 Intra-band 9g34.2.5.2 Inter-band 9g34.2.5.3 Intra-band contiguous + Inter-band . 9g34.2.5.4 Intra-band non-contiguous + Inter-band 9g34.2.5.5 Intra-band non-contiguous + Intra-band contiguous . 10g34.3 Test points selection and Frequency ranges to cover in Tx spuri

19、ous emissions test cases for UL CA. 10g34.4 Test points selection in 3DL Receiver test cases to align with 2DL test cases and skipping of 2DL fallback . 10g3Annex A: Derivation documents 11g3Annex B: Change history . 12g3History 13g3ETSI ETSI TR 136 905 V12.1.0 (2016-05)43GPP TR 36.905 version 12.1.

20、0 Release 12Foreword This Technical Report has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, i

21、t will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y

22、the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 136 905 V12.1.0 (2016-05)53GPP TR 36.905 version 12.1.0 Release 121

23、Scope The present document specifies and contains the derivation of Test Points for RF test cases, thereby 3GPP TSG RAN WG5 will have a way of storing the input contributions provided. The test cases are described in TS36.521-12. The test cases which have been analysed to determine Test Points are i

24、ncluded as .zip files. The present document is applicable from Release 10 up to the release indicated on the front page of the present Terminal conformance specifications. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the pres

25、ent document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP do

26、cument (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.521-1: “User Equipment (UE) conformance specification, Radio transmis

27、sion and reception Part 1: conformance testing“. 3 3GPP TS 36.101: “E-UTRA UE radio transmission and reception“. 4 3GPP TS 36.521-2: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 2: Implementation Conforman

28、ce Statement (ICS)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Other de

29、finitions used in the present document are listed in 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. 3.2 Symbols Symbols used in the present document are listed in 3GPP TR 21.905 1, 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in

30、 TR 21.905 1 apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. Other abbreviations used in the present document are listed in 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. ETSI ETSI TR 136 905 V12.1.0 (2016-05)63GP

31、P TR 36.905 version 12.1.0 Release 124 Test coverage analysis 4.1 Test point selection in Additional Maximum Power Reduction (A-MPR) test cases When deriving test points for these test cases the calculation of maximum output power backoff and determination of possible worst cases for out-of-band emi

32、ssions are non-trivial and therefore require an analysis which is documented here. 4.1.1 A-MPR test case for single carrier This section contains information on test point selection for test case 6.2.4 in 2, Additional Maximum Power Reduction (A-MPR). Test points in this test were added in the past,

33、 and no selection information is therefore available. 4.1.2 A-MPR test case for intra-band contiguous UL CA This section contains information on test point selection for test case 6.2.4A.1 in 2, Additional Maximum Power Reduction (A-MPR) for CA (intra-band contiguous DL CA and UL CA). The analyses a

34、re performed per NS-value and are stored as zip-files as defined in annex A. 4.1.3 A-MPR test case for inter-band UL CA This section contains information on test point selection for test case 6.2.4A.2 in 2, Additional Maximum Power Reduction (A-MPR) for CA (inter-band DL CA and UL CA). TS 36.101 3 s

35、pecifies band dependent NS-values, which in the inter-band UL CA test cases become a combination of two NS-values. Testing all possible combinations would lead to too excessive testing and the combinations that are realistic should therefore be prioritized. This selection is documented in table 4.1.

36、3-1. ETSI ETSI TR 136 905 V12.1.0 (2016-05)73GPP TR 36.905 version 12.1.0 Release 12Table 4.1.3-1: A-MPR test coverage per CA configuration for inter-band CA with 2 CC CA config with UL CA support (Note 1) NS values in same order as Uplink CA Configuration column Applicable test case Comment/Justifi

37、cation CA_1A-3A NS_05 NS_01 6.6.3.3A.2 CA_1A-5A NS_05 NS_01 6.6.3.3A.2CA_1A-7A NS_05 NS_01 6.6.3.3A.2 CA_1A-8A NS_05 NS_01 6.6.3.3A.2CA_1A-19A NS_05 NS_08 6.6.3.3A.2 Note 3 CA_1A-21A NS_05 NS_09 6.6.3.3A.2 Note 3CA_2A-4A NS_03 NS_03 6.6.2.2A.2 CA_2A-13A NS_03 NS_06 6.6.2.2A.2CA_2A-13A NS_03 NS_07 6.

38、6.2.2A.2, 6.6.3.3A.2 CA_3A-5A N/A Note 2CA_3A-7A N/A Note 2CA_3A-8A N/A Note 2CA_3A-19A NS_01 NS_08 6.6.3.3A.2 Note 3CA_3A-20A N/A Note 2 CA_3A-26A NS_01 NS_12, NS_15 6.6.3.3A.2 CA_4A-7A NS_03 NS_01 6.6.2.2A.2 CA_4A-12A NS_03 NS_06 6.6.2.2A.2 CA_4A-13A NS_03 NS_06 6.6.2.2A.2 CA_4A-13A NS_03 NS_07 6.

39、6.2.2A.2, 6.6.3.3A.2 CA_4A-17A NS_03 NS_06 6.6.2.2A.2 CA_5A-7A N/A Note 2CA_5A-12A NS_01 NS_06 6.6.2.2A.2 CA_19A-21A NS_08 NS_09 6.6.3.3A.2 Note 1: As per TS 36.101 V12.10.1 Note 2: No test required since band combinations where only NS_01 is possible have no additional requirements, covered by sect

40、ion 6.2.3 test cases in TS 36.521-1 2 Note 3: No test required since only A-Spur requirements apply, and the frequency range to test is unaffected by intermodulation products as described in section 4.3. The analyses are performed per NS-value and are stored as zip-files as defined in annex A. The g

41、eneral principle for selection of test points is: - Test the minimum MPR + A-MPR value - Test the maximum MPR + A-MPR value - Test the maximum unbalanced total power backoff among CCs (max Pcmaxcdifference). 4.2 Test frequency and bandwidth selection in Reference sensitivity test cases The determina

42、tion of test frequency and channel bandwidths are made considering test time, possible worst cases and operator deployments. This is non-trivial and requires an analysis which is documented here. 4.2.1 Reference sensitivity level for single carrier This section contains information on test point sel

43、ection for test case 7.3 in 2, Reference sensitivity level Test points in this test were added in the past, and no selection information is therefore available. 4.2.2 Reference sensitivity level for intra-band contiguous CA This section contains information on test point selection for test cases 7.3

44、A.1 - Reference sensitivity level for CA (intra-band contiguous DL CA and UL CA) and 7.3A.2 - Reference sensitivity level for CA (intra-band contiguous DL CA without UL CA). ETSI ETSI TR 136 905 V12.1.0 (2016-05)83GPP TR 36.905 version 12.1.0 Release 12In this test case, there are no CA configuratio

45、n specific test points. The general rule of Low, High test frequency and Lowest NRB_agg, Highest NRB_aggis chosen for any CA configuration. 4.2.3 Reference sensitivity level for inter-band CA This section contains information on test point selection for test case 7.3A.3 - Reference sensitivity level

46、 for CA (inter-band DL CA without UL CA) In this test case, there are default test points to be used unless CA configuration specific test points are over-ruling in table 4.2.3-1. The default rule of Mid test frequency and Highest NRB_aggis chosen for any CA configuration. Table 4.2.3-1: CA configur

47、ation specific test points for inter-band CA with 2 CC CA config Justification Comments CA_1A-3A - CA_1A-11ACA_1A-18ACA_1A-19ACA_1A-21A - CA_1A-26A CA_1A-28ACA_1A-41ACA_2A-13A - CA_3A-8ACA_3A-19A CA_3A-26ACA_3A-27A - CA_3A-28ACA_3A-42A Test points are selected based on RAN4 defined exceptions CA_4A-

48、5ACA_4A-13A - CA_4A-17ACA_8A-11ACA_11A-18A - CA_18A-28ACA_19A-21ACA_26A-41A - CA_39A-41ACA_7A-28A 4.2.4 Reference sensitivity level for intra-band non-contiguous CA This section contains information on test point selection for test case 7.3A.4 Reference sensitivity level for CA (intra-band non-conti

49、guous DL CA without UL CA). Testpoint choice is based on the Table 7.3A.0-3. Only largest PCC BW + largest SCC BW and largest PCC BW + smallest SCC BW are tested. All corner cases VS Wgapspecified for those 2 BW combinations in the Table 7.3A.0-3 are tested, larger Wgap being considered worse. PCC is allocated to the upper carrier, unless DL Band is below UL Band. Most testpoint IDs for FDD bands have to be tested twice, once with RB allocation applicable to PCC REFSENS test, which is the standard single carrier RB allocation, and