ETSI TR 136 905-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Derivation of test points for radio tres.pdf

1、 ETSI TR 136 905 V14.5.0 (2018-01) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Derivation of test points for radio transmission and reception conformance test cases (3GPP TR 36.905 version 14.5.0 Release 14) floppy3TECHNI

2、CAL REPORT ETSI ETSI TR 136 905 V14.5.0 (2018-01)13GPP TR 36.905 version 14.5.0 Release 14Reference RTR/TSGR-0536905ve50 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association b

3、ut non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versio

4、ns of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a speci

5、fic network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you fi

6、nd errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfi

7、lm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the E

8、TSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered

9、and owned by the GSM Association. ETSI ETSI TR 136 905 V14.5.0 (2018-01)23GPP TR 36.905 version 14.5.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essentia

10、l IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates ar

11、e available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) wh

12、ich are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and

13、 conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI

14、3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UM

15、TS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verb

16、al forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 136 905 V14.5.0 (2018-01)33GPP TR 36.905 version 14.5.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g

17、3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Symbols 5g33.3 Abbreviations . 5g34 Test coverage analysis 6g34.1 Test point selection in Additional Maximum Power Reduction (A-MPR) test cases. 6g34.1.1 A-MPR test case for single carrier

18、6g34.1.2 A-MPR test case for intra-band contiguous UL CA . 7g34.1.3 A-MPR test case for inter-band UL CA 7g34.2 Test frequency and bandwidth selection in Reference sensitivity test cases 9g34.2.1 Reference sensitivity level for single carrier . 9g34.2.2 Reference sensitivity level for intra-band con

19、tiguous CA 9g34.2.3 Reference sensitivity level for inter-band CA . 9g34.2.4 Reference sensitivity level for intra-band non-contiguous CA . 10g34.2.5 Reference sensitivity level for 3DL CA 10g34.2.5.2 Inter-band 11g34.2.5.3 Intra-band contiguous + Inter-band . 12g34.2.5.4 Intra-band non-contiguous +

20、 Inter-band 13g34.2.5.5 Intra-band non-contiguous + Intra-band contiguous . 13g34.2.6 Reference sensitivity level for 4DL CA 14g34.2.6.1 Intra-band contiguous 14g34.2.6.2 Inter-band 14g34.2.6.3 Intra-band contiguous + Inter-band . 14g34.2.6.4 Intra-band non-contiguous + Inter-band 15g34.2.6.5 Intra-

21、band non-contiguous + Intra-band contiguous . 15g34.2.6.6 Intra-band non-contiguous + Intra-band non-contiguous 15g34.2.7 Reference sensitivity level for 5DL CA 16g34.2.7.1 Intra-band contiguous 16g34.2.7.2 Inter-band 16g34.2.7.3 Intra-band contiguous + Inter-band . 16g34.2.7.4 Intra-band non-contig

22、uous + Inter-band 17g34.2.7.5 Intra-band non-contiguous + Intra-band contiguous . 17g34.2.7.6 Intra-band non-contiguous + Intra-band non-contiguous 17g34.3 Test points selection and Frequency ranges to cover in Tx spurious emissions test cases for UL CA. 17g34.4 Test points selection in 3DL Receiver

23、 test cases to align with 2DL test cases and skipping of 2DL fallback . 18g3Annex A: Derivation documents 19g3Annex B: Change history . 20g3History 23g3ETSI ETSI TR 136 905 V14.5.0 (2018-01)43GPP TR 36.905 version 14.5.0 Release 14Foreword This Technical Report has been produced by the 3rdGeneration

24、 Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and a

25、n increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enha

26、ncements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 136 905 V14.5.0 (2018-01)53GPP TR 36.905 version 14.5.0 Release 141 Scope The present document specifies and contains the derivation of Test Points f

27、or RF test cases, thereby 3GPP TSG RAN WG5 will have a way of storing the input contributions provided. The test cases are described in TS36.521-12. The test cases which have been analysed to determine Test Points are included as .zip files. The present document is applicable from Release 10 up to t

28、he release indicated on the front page of the present Terminal conformance specifications. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication

29、, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to

30、the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.521-1: “User Equipment (UE) conformance specification, Radio transmission and reception Part 1: conformance testing“. 3 3GPP TS 36.101: “E-UTRA UE rad

31、io transmission and reception“. 4 3GPP TS 36.521-2: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 2: Implementation Conformance Statement (ICS)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For

32、 the purposes of the present document, the terms and definitions given in TR 21.905 1 apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Other definitions used in the present document are listed in 3GPP TS 36.521-1 2 or 3GPP T

33、S 36.101 3. 3.2 Symbols Symbols used in the present document are listed in 3GPP TR 21.905 1, 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 apply. An abbreviation defined in the present document takes precede

34、nce over the definition of the same abbreviation, if any, in TR 21.905 1. Other abbreviations used in the present document are listed in 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. ETSI ETSI TR 136 905 V14.5.0 (2018-01)63GPP TR 36.905 version 14.5.0 Release 144 Test coverage analysis 4.1 Test point sele

35、ction in Additional Maximum Power Reduction (A-MPR) test cases When deriving test points for these test cases the calculation of maximum output power backoff and determination of possible worst cases for out-of-band emissions are non-trivial and therefore require an analysis which is documented here

36、. 4.1.1 A-MPR test case for single carrier This section contains information on test point selection for test case 6.2.4 in 2, Additional Maximum Power Reduction (A-MPR). Test points in this test were added in the past, and no selection information is therefore available prior the NS values in table

37、 4.1.1-1. Selection of test points should include some possible worst combinations based on the A-MPR characteristics specified for each NS value and these shall be selected so that they match with corresponding spectrum emission requirements test points. The number of test points should be realisti

38、c. Table 4.1.1-1: NS value specific test points for A-MPR NS value Justification Comments NS_05 See attachment “TpAnalysisAMPR(NS_05)_6.2.4_v2.zip” Added at RAN5#73 NS_24 See attachment “TpAnalysisAMPR_6.2.4(NS_24 and NS_25).zip” Added at RAN5#72 NS_25 See attachment “TpAnalysisAMPR_6.2.4(NS_24 and

39、NS_25).zip” Added at RAN5#72 NS_27 See attachment “TpAnalysisAMPR_6.2.4(NS_27).zip” Added at RAN5#74 NS_04 (Power Class 2) See attachment “TpAnalysisAMPR_6.2.4_1(NS_04_PC2).zip” Added at RAN5#74NS_04 (Power Class 3) See attachment “TpAnalysisAMPR_6.2.4(NS_04_PC3).zip” Added at RAN5#75 NS_22 See atta

40、chment “TpAnalysisAMPR_6.2.4(NS_22 and NS_23).zip” Added at RAN5#75 NS_23 See attachment “TpAnalysisAMPR_6.2.4(NS_22 and NS_23).zip” Added at RAN5#75 The analyses for UE category M1 are performed per NS-value in table 4.1.1-2. The general principles for selection of test points are: - For Additional

41、 spurious emissions, requirements are the same for all bandwidths. Since channel bandwidth is not judged to have any impact on the UE transmit signal for category M1, only one bandwidth needs to be tested. The lowest bandwidth with emissions requirement has lowest guard band and is therefore the mos

42、t stringent. - For NS-values with Additional SEM requirement and without any allowed A-MPR, same test points as in SEM test case 6.6.2.1EA can be used. - For NS-values with Additional Spurious requirement and without any allowed A-MPR, same test points as in spurious test case 6.6.3EA.1 can be used

43、- For Additional SEM, test frequency is selected as in SEM test case. - For Additional spurious emissions, test frequency selection depends on if protected range is above or below the UE transmit signal in frequency. If protected range is in higher frequency High frequency is selected, if lower freq

44、uency Low range is selected. ETSI ETSI TR 136 905 V14.5.0 (2018-01)73GPP TR 36.905 version 14.5.0 Release 14Table 4.1.1-2: NS value specific test points for A-MPR UE category M1 NS value Operating band Applicable test case RB allocation and modulation Bandwidth Test frequency Comments NS_03 2, 4 6.6

45、.2.2EA SEM (Note 1) Lowest, 5MHz, 10MHz, Highest Low, Mid, High NS_04 41 6.6.2.2EA TBD NS_05 1 6.6.3EA.3 Spur (Note 2) 5 MHz Low NS_06 12, 13 6.6.2.2EA SEM (Note 1) Lowest, 5MHz, 10MHz, Highest Low, Mid, High NS_07 13 6.6.2.2EA See attachment “TpAnalysisAMPR(NS_07)_6.2.4EA.zip” 10MHz Low, Mid, High

46、Testing only 10 MHz to align withlegacy LTE test case 6.6.3EA.3 10 MHz Low Emission requirements areonly defined for 1MHz channel bandwidth NS_08 19 6.6.3EA.3 Spur (Note 2) 5 MHz High NS_09 21 6.6.3EA.3 Spur (Note 2) 5 MHz High NS_10 20 N/A Not tested due tomissing requirements NS_12 26 6.6.3EA.3 TB

47、D NS_13 26 6.6.3EA.3 Spur (Note 2) 1.4 MHz Low (Note 3) NS_14 26 6.6.3EA.3 Spur (Note 2) 10 MHz Low (Note 3) NS_15 26 6.6.3EA.3 See attachment “TpAnalysisAMPR(NS_15)_6.2.4EA.zip” 1.4 MHz High, High 4 MHz NS_16 27 6.6.3EA.3 Spur (Note 2) 1.4 MHz Low NS_17 28 6.6.3EA.3 Spur (Note 2) 5 MHz Low (Note 3)

48、 NS_18 28 6.6.3EA.3 Spur (Note 2) 5 MHz Low Note 1: No A-MPR allowed, same test points as SEM test case 6.6.2.1EA can be used for Additional SEM Note 2: No A-MPR allowed, same test points as Spurious test case 6.6.3EA.1 can be used for Additional Spurious Note 3: Protected range below UE transmit si

49、gnal, and restricted carrier frequency. Use lowest allowed frequency 4.1.2 A-MPR test case for intra-band contiguous UL CA This section contains information on test point selection for test case 6.2.4A.1 in 2, Additional Maximum Power Reduction (A-MPR) for CA (intra-band contiguous DL CA and UL CA). The analyses are performed per NS-value and are stored as zip-files as defined in annex A. 4.1.3 A-MPR test case for inter-band UL CA This section contains information on test point selection for test case 6.2.4A.2 in 2, Additional Maximum