ETSI TR 137 976-2017 Universal Mobile Telecommunications System (UMTS) LTE Measurement of radiated performance for Multiple Input Multiple Output (MIMO) and multi-antenna reception.pdf

1、 ETSI TR 137 976 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Measurement of radiated performance for Multiple Input Multiple Output (MIMO) and multi-antenna reception for High Speed Packet Access (HSPA) and LTE terminals (3GPP TR 37.976 version 14.0.0 Release 14) TECHNI

2、CAL REPORT ETSI ETSI TR 137 976 V14.0.0 (2017-04)13GPP TR 37.976 version 14.0.0 Release 14Reference RTR/TSGR-0437976ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Associat

3、ion but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print v

4、ersions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a

5、specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If y

6、ou find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and mi

7、crofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All right

8、s reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Member

9、s GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 137 976 V14.0.0 (2017-04)23GPP TR 37.976 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The informat

10、ion pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETS

11、I Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the up

12、dates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identi

13、ties, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document

14、 “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citati

15、on. ETSI ETSI TR 137 976 V14.0.0 (2017-04)33GPP TR 37.976 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviati

16、ons . 7g34 Introduction 7g34.1 Background 7g34.2 Study item objective . 8g34.3 High Level Requirements . 8g34.4 Proposed work plan 8g35 Performance Metrics 11g35.1 Figure of Merits 11g35.1.1 Definition of MIMO Throughput 11g35.1.2 Definition of SNR . 11g35.1.2.1 Multiple probe antenna based method.

17、12g35.1.2.2 Reverberation chamber based method 13g35.1.2.3 Two-stage method . 13g35.2 Receiver Performance Metrics . 13g36 Measurement Methodologies . 13g36.1 Fixed Reference Measurement Channels (FRCs) . 13g36.2 MIMO Channel Models . 13g36.3 Downlink Measurement Methodologies 17g36.3.1 Methodologie

18、s based on Anechoic RF Chamber 18g36.3.1.1 Candidate Solution 1 . 18g36.3.1.1.1 Concept and Configuration 19g36.3.1.1.2 Test Conditions 20g36.3.1.2 Candidate Solution 2 . 21g36.3.1.2.1 Concept and Configuration 22g36.3.1.2.1A Scalability of the methodology 23g36.3.1.2.2 Test Conditions 24g36.3.1.3 C

19、andidate Solution 3 . 25g36.3.1.3.1 Concept and Configuration 25g36.3.1.3.2 Test Conditions 26g36.3.1.4 Candidate Solution 4 . 27g36.3.1.4.1 Concept and Configuration 27g36.3.1.5 Candidate Solution 5 . 28g36.3.1.5.1 Concept and Configuration 28g36.3.1.5.2 Test Conditions 31g36.3.1.Y Downlink Transmi

20、ssion Modes 32g36.3.2 Methodologies based on Reverberation Chamber 32g36.3.2.1 Candidate Solution 1 . 32g36.3.2.1.1 Concept and Configuration 33g36.3.2.1.2 Test Conditions 34g36.3.2.2 Candidate Solution 2 . 35g36.3.2.2.1 Concept and Configuration 36g36.3.2.2.2 Test Conditions 36g36.3.2.Y Downlink Tr

21、ansmission Modes 37g3ETSI ETSI TR 137 976 V14.0.0 (2017-04)43GPP TR 37.976 version 14.0.0 Release 147 Measurement Results from COST2100 . 37g37.1 Reference Measurement Channels . 37g38 Measurement Results from CTIA 37g38.1 Reference Measurement Channels . 37g39 Conclusions 38g39.1 Comparison of Cand

22、idate Methodologies 38g39.1.1 Definitions of rows in the table . 41g39.2 Lessons learnt and conclusions 42g310 Recommendations 43g3Annex A (Informative): Test Plan for Anechoic Chamber based candidate methodologies with 3 or more probe antennas . 45g3A.1 Introduction 45g3A.2 Test setup 45g3A.2.1 Cal

23、ibration 46g3A.2.1.1 Calibration Check . 46g3A.2.2 Radio Channel Conditions 47g3A.2.2.1 Average channel power 47g3A.3 Test Procedure 48g3A.3.1 HSDPA connection settings . 48g3A.3.1.1 FRC . 48g3A.3.2 Method of test . 49g3Annex B (Informative): LTE MIMO OTA Test Plan . 51g3B.1 Test Objectives . 51g3B.

24、2 Test Setup . 51g3B.2.1 Figure of Merits (FOMs) 54g3B.2.2 Channel Models 55g3B.2.3 Antenna Probes 55g3B.2.4 eNodeB Emulator Parameter Settings 56g3B.2.5 Reference DUTs Configurations 57g3B.3 Calibration of Test System . 58g3B.3.1 Calibration Procedure for Anechoic-chamber based methodologies 58g3B.

25、3.1.1 Probe power calibration 58g3B.3.1.2 Channel power calibration 59g3B.3.1.3 Calibration check 59g3B.3.2 Calibration Procedure for Reverberation-chamber based methodologies 60g3B.3.2.1. Tuning Reverberation Chamber to Specific Channel Model 61g3B.3.2.2.1 Reverberation Chamber Combined with Channe

26、l Emulator . 61g3B.3.2.2 Average Path Loss Measurement 61g3B.3.3 Calibration Procedure for 2-Stage methodologies 62g3B.3.3.1 Antenna pattern measurement calibration in stage I . 62g3B.3.3.3 Power calibration for results comparison from different OTA test methods 64g3B.3.4 Calibration Procedure for a

27、ntenna pattern based methodologies . 64g3B.3.5 Calibration Procedure for two-channel method 65g3B.4 Test Procedure 65g3B.4.1 Test Procedure 1 . 65g3B.4.1A Test Procedure 1A (Reverberation Chamber Based Methodologies) . 67g3B.4.2 Test Procedure 2 . 67g3B.4.3 Test Procedure 3 (Antenna spatial correlat

28、ion measurement) 68g3B.4.4 Test Procedure 4 (Two-stage throughput) 69g3B.4.5 Test Procedure 5 for two-channel method 71g3Annex C (informative): Change history . 72g3History 75g3ETSI ETSI TR 137 976 V14.0.0 (2017-04)53GPP TR 37.976 version 14.0.0 Release 14Foreword This Technical Report has been prod

29、uced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying cha

30、nge of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of subst

31、ance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 137 976 V14.0.0 (2017-04)63GPP TR 37.976 version 14.0.0 Release 141 Scope The present document is the technical report for t

32、he study item on MIMO OTA, which was approved at TSG RAN#43 2. The scope of the SI is to define a 3GPP methodology for measuring the radiated performance of multiple antenna reception and MIMO receivers in the UE. The test methodology should be relevant for HSPA and LTE technologies, with particular

33、 focus on handheld devices and devices embedded in laptop computers. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, vers

34、ion number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of

35、that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 RP-090352, “Proposed new study item: Measurement of radiated performance for MIMO and multi-antenna reception for HSPA and LTE terminals.” 3 TD(09) 766, COST2100 SWG 2.2, Braunschweig

36、, Germany, Pekka Kysti et. al. “Proposal for standardized test procedure for OTA testing of multi-antenna terminals”, Elektrobit. 4 3GPP TS 34.114: “User Equipment (UE) / Mobile Station (MS) Over The Air (OTA) Antenna Performance Conformance Testing”. 5 3GPP TS 25.214, “Physical Layer Procedures (FD

37、D)” 6 TD(09) 742, COST 2100 SWG 2.2, Braunschweig, Germany, February 2009, J. Takada, “Handset MIMO Antenna Testing Using a RF-controlled Spatial Fading Emulator”. 7 3GPP TS 36.212, “Evolved Universal Terrestrial Radio Access (E-UTRA); Multiplexing and channel coding”. 8 3GPP TS 36.213, “Evolved Uni

38、versal Terrestrial Radio Access (E-UTRA); Physical layer procedures”. 9 CTIA, “Test Plan for Mobile Station Over the Air Performance - Method of Measurement for Radiated RF Power and Receiver Performance”, Revision 3.0, 4/30/2009. 10 3GPP TS 36.101, “User Equipment (UE) radio transmission and recept

39、ion”. 11 3GPP TR 25.914, “Measurements of radio performances for UMTS terminals in speech mode”. 12 3GPP TS 36.521-1, “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification Radio transmission and reception; Part 1: Conformance Testing” 3 Definitions, symb

40、ols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. ETSI ETSI TR 137 976 V14.0.0 (

41、2017-04)73GPP TR 37.976 version 14.0.0 Release 143.2 Symbols For the purposes of the present document, the following symbols apply: H Channel matrix Adjacent probe separation angle Zenith angle in the spherical co-ordinate system Azimuth angle in the spherical co-ordinate system 3.3 Abbreviations Fo

42、r the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. AoA Angle of Arrival AoD Angle of Departure BS Base Station B

43、SE Base Station Emulator BTS Base Transceiver Station COST Cooperation of Scientific and Technical CTIA Cellular and Telecommunication Industry Association DL Downlink DUT Device Under Test FRC Fixed Reference Measurement Channel FTP File Transfer Protocol HSPA High Speed Packet Access HTTP HyperTex

44、t Transfer Protocol LTE Long Term Evolution MCS Modulation and Coding Scheme MIMO Multiple Input Multiple Output OTA Over-the-Air SCM Spatial Channel Model SCME Spatial Channel Model Extension SI Study Item SISO Single Input Single Output SNR Signal-to-Noise Ratio SS System SimulatorTBS Transport Bl

45、ock Size TTI Transmission Time Interval UE User Equipment UDP User Datagram Protocol UL Uplink VRC Variable Reference Measurement Channel 4 Introduction 4.1 Background The use of MIMO and receiver diversity in the UE is expected to give large gains in downlink throughput performance for HSPA and LTE

46、 devices. 3GPP already defined conducted tests for MIMO and multiple antenna receivers (type 1 and type 3 in TS25.101 for HSPA demodulation), but it is clear that the ability to duplicate these gains in the field is highly dependent on the performance of the receive-antenna system. ETSI ETSI TR 137

47、976 V14.0.0 (2017-04)83GPP TR 37.976 version 14.0.0 Release 14At TSG RAN#41, it was indicated that there is a need for a test methodology to be created with the aim of measuring and verifying the radiated performance of multi-antenna and MIMO receiver in UEs for both HSPA and LTE devices. As an outc

48、ome of the discussion, an LS was sent to COST 2100 SWG2.2 and CTIA ERP to ask them for feedback on their plans/ongoing work in this area, and also the timescales for which such work could be completed to define such a methodology, with particular focus on handheld devices and devices embedded in lap

49、top computers. Since then, feedback from COST 2100 and CTIA has suggested they are happy to work on this topic. However given that 3GPP is the customer for this work as well as being a potential contributor, it is important to aim for commonly-accepted measurement and test methodology to be used across the industry. 4.2 Study item objective The high level objective of this study item is to define a 3GPP methodology for measuring the radiated performance of multiple antenna reception and MIMO receivers in the UE. The test methodology sh