ETSI TR 137 977-2016 Universal Mobile Telecommunications System (UMTS) LTE Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA) Verific.pdf

1、 ETSI TR 1Universal Mobile TelUniversal Terrand Evolved UniversaVerification of radiated mUse(3GPP TR 37.9TECHNICAL REPORT 137 977 V13.3.0 (2016elecommunications System (LTE; rrestrial Radio Access (UTRAsal Terrestrial Radio Access (multi-antenna reception perfser Equipment (UE) .977 version 13.3.0

2、Release 1316-04) (UMTS); RA) s (E-UTRA); erformance of 13) ETSI ETSI TR 137 977 V13.3.0 (2016-04)13GPP TR 37.977 version 13.3.0 Release 13Reference RTR/TSGR-0437977vd30 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 1

3、6 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in pri

4、nt. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the P

5、ortable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/por

6、tal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mec

7、hanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunicatio

8、ns Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM

9、logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 137 977 V13.3.0 (2016-04)23GPP TR 37.977 version 13.3.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to

10、these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Lat

11、est updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI

12、Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identit

13、ies or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall n

14、ot“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct ci

15、tation. ETSI ETSI TR 137 977 V13.3.0 (2016-04)33GPP TR 37.977 version 13.3.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbrev

16、iations . 9g34 Introduction 10g34.1 Background 10g34.2 Work item objective . 10g34.3 High level requirements . 11g35 Performance metrics . 12g35.1 Figure of Merits 12g35.1.1 Definition of MIMO throughput . 12g35.1.2 Definition of Signal-to-Interference Ratio (SIR) 12g35.1.2.1 SIR Control for Multi-P

17、robe Anechoic Chamber Methodology . 13g35.1.2.2 SIR Control for the reverberation chamber method 14g35.1.2.3 SIR Control for the reverberation chamber plus channel emulator method 15g35.1.2.4 SIR Control for the two-stage methodology . 16g35.2 Averaging of throughput curves . 18g35.2.1 Average of po

18、wer levels . 18g36 Candidate measurement methodologies . 19g36.1 Void 19g36.2 Void 19g36.3 Downlink measurement methodologies . 19g36.3.1 Methodologies based on Anechoic RF Chamber 19g36.3.1.1 Candidate Solution 1 . 19g36.3.1.1.1 Concept and configuration. 20g36.3.1.1.2 Scalability of the methodolog

19、y 21g36.3.1.1.3 Test conditions 22g36.3.1.2 Void. 23g36.3.1.3 Candidate solution 3 23g36.3.1.3.1 Concept and configuration. 23g36.3.1.3.2 Test conditions 26g36.3.1.3.3 Overview of calibration procedures specific to the RTS method 26g36.3.1.4 Candidate solution 4 27g36.3.1.4.1 Concept and configurati

20、on. 27g36.3.1.4.2 Decomposition approach . 27g36.3.1.4.3 Conducted test . 29g36.3.1.4.4 Radiated test 29g36.3.1.4.5 Possible extensions of the decomposition method 30g36.3.1.5 Candidate solution 5 31g36.3.1.5.1 Concept and configuration. 31g36.3.1.5.2 Test conditions 33g36.3.2 Methodologies based on

21、 Reverberation Chamber 35g36.3.2.1 Candidate solution 1 35g36.3.2.1.1 Concept and configuration. 36g36.3.2.1.2 Test conditions 37g3ETSI ETSI TR 137 977 V13.3.0 (2016-04)43GPP TR 37.977 version 13.3.0 Release 136.3.2.2 Candidate solution 2 38g36.3.2.2.1 Concept and configuration. 38g36.3.2.2.2 Test c

22、onditions 39g37 Base Station (BS) configuration . 40g37.1 eNodeB emulator settings 40g38 Channel Models 42g38.1 Introduction 42g38.2 Channel Model(s) to be validated . 42g38.3 Verification of Channel Model implementations . 44g38.3.1 Measurement instruments and setup . 44g38.3.1.1 Vector Network Ana

23、lyzer (VNA) setup 44g38.3.1.2 Spectrum Analyzer (SA) setup 45g38.3.2 Validation measurements 45g38.3.2.1 Power Delay Profile (PDP) . 45g38.3.2.2 Doppler/Temporal correlation. 47g38.3.2.3 Spatial correlation . 48g38.3.2.4 Cross-polarization . 50g38.3.3 Reporting 51g38.4 Channel Model validation resul

24、ts . 52g38.4.1 Scope 52g38.4.2 Power Delay Profile (PDP) . 52g38.4.3. Doppler / Temporal Correlation 56g38.4.4 Spatial correlation . 57g38.4.5 Cross polarization . 59g38.4.6 Summary . 59g38.5 Channel Model emulation of the Base Station antenna pattern configuration . 60g39 Reference antennas and dev

25、ices testing . 60g39.1 Reference antennas design . 60g39.2 Reference devices . 61g39.3 Description of tests with reference antennas and devices . 61g39.3.1 The Absolute Data Throughput Comparison Framework . 61g39.3.1.1 Introduction . 61g39.3.1.2 Antenna pattern data format 62g39.3.1.3 Emulation of

26、antenna pattern rotation . 62g39.3.1.4 Absolute Data Throughput measurement enabler . 64g39.3.1.5 Output data format 65g39.3.1.6 Application of the framework and scenarios for comparison 68g39.3.1.7 Proof of concept 70g39.3.1.7.1 The first scenario, anechoic based . 70g39.3.1.7.2 The second scenario

27、, reverberation chamber based . 72g39.3.1.7.3 The third scenario, reverberation chamber and channel emulator based . 73g39.4 Device positioning 75g39.4.1 Handheld UE Browsing mode . 75g39.4.2 Handheld UE Speech mode . 75g39.4.3 Laptop Mounted Equipment (LME) . 75g39.4.4 Laptop Eembedded Equipment (L

28、EE) 75g310 Measurement results from testing campaigns 76g310.1 Introduction 76g310.2 CTIA test campaign 76g310.2.1 Description of the test plan . 76g310.2.2 Anechoic chamber method with multiprobe configuration . 76g310.2.3 Reverberation chamber method using NIST channel model and using channel emul

29、ator with short delay spread low correlation channel model . 82g310.2.4 RTS method results . 90g310.3 3GPP harmonization test campaign 94g310.3.1 Description of the test plan . 94g310.3.2 Devices under test . 95g310.3.3 Measurement uncertainty bound for harmonization . 96g310.3.4 Summary of results

30、. 96g3ETSI ETSI TR 137 977 V13.3.0 (2016-04)53GPP TR 37.977 version 13.3.0 Release 1310.3.5 Harmonization outcome 100g311 Void 102g312 MIMO OTA test procedures 102g312.1 Anechoic chamber method with multiprobe configuration test procedure . 102g312.1.1 Base Station configuration 102g312.1.2 Channel

31、Models 102g312.1.3 Device positioning and environmental conditions 102g312.1.4 System Description . 102g312.1.4.1 Solution Overview 102g312.1.4.2 Configuration 103g312.1.4.3 Calibration . 103g312.1.5 Figure of Merit 103g312.1.6 Test procedure 103g312.1.6.1 Initial conditions . 103g312.1.6.2 Test pro

32、cedure . 103g312.1.7 Measurement Uncertainty budget . 104g312.2 Reverberation chamber test procedure . 104g312.2.1 Base Station configuration 104g312.2.2 Channel Models 104g312.2.3 Device positioning and environmental conditions 104g312.2.4 System Description . 104g312.2.4.1 Solution Overview 104g31

33、2.2.4.2 Configuration 104g312.2.4.3 Calibration . 104g312.2.5 Figure of Merit 104g312.2.6 Test procedure 104g312.2.6.1 Initial conditions . 104g312.2.6.2 Test procedure . 105g312.2.7 Measurement Uncertainty budget . 105g312.3 RTS method test procedure 105g312.3.1 Base Station configuration 105g312.3

34、.2 Channel Models 106g312.3.3 Device positioning and environmental conditions 106g312.3.4 System Description . 106g312.3.4.1 Solution Overview 106g312.3.4.2 Configuration 106g312.3.4.3 Calibration . 106g312.3.5 Figure of Merit 106g312.3.6 Test procedure 106g312.3.6.1 Initial conditions . 106g312.3.6

35、.2 Test procedure . 106g312.3.7 Measurement Uncertainty budget . 107g312.4 Comparison of methodologies 107g3Annex A: eNodeB Emulator Downlink power verification 110g3A.1 Introduction 110g3A.2 Test prerequisites 110g3A.3 Test Methodology 111g3Annex B: Measurement uncertainty budget . 114g3B.1 Measure

36、ment uncertainty budget for multiprobe method 114g3B.2 Measurement uncertainty budget contributors for the RTS method 117g3B.3 Measurement uncertainty budget for reverberation chamber method 119g3B.4 Measurement uncertainty budget for decomposition method 121g3B.5 Measurement uncertainty budget for

37、reverberation chamber plus channel emulator method 122g3ETSI ETSI TR 137 977 V13.3.0 (2016-04)63GPP TR 37.977 version 13.3.0 Release 13B.6 Fading channel emulator output uncertainty 124g3B.7 External Amplifiers Uncertainty Terms . 124g3B.7.1 Stability 124g3B.7.2 Linearity . 124g3B.7.3 Noise Figure .

38、 124g3B.7.4 Mismatch 125g3B.7.5 Gain 125g3Annex C: Other Environmental Test conditions for consideration . 126g3C.1 Scope 126g3C.2 3D isotropic Channel Models . 126g3C.3 Verification of Channel Model implementations . 128g3C.3.1 Measurement instruments and setup. 128g3C.3.1.1 Vector Network Analyzer

39、 (VNA) setup . 128g3C.3.1.2 Spectrum Analyzer (SA) setup . 129g3C.3.2 Validation measurements . 130g3C.3.2.1 Power Delay Profile (PDP) . 130g3C.3.2.2 Doppler for 3D isotropic models 132g3C.3.2.3 Base Station antenna correlation for 3D isotropic models 134g3C.3.2.4 Rayleigh fading . 135g3C.3.2.5 Isot

40、ropy for 3D isotropic models 137g3C.3.3 Reporting 139g3C.4 Channel model validation results . 139g3C.4.1 Scope 140g3C.4.2 Power Delay Profile (PDP) for 3D isotropic models 140g3C.4.3 Doppler for 3D isotropic models 142g3C.4.4 Base Station antenna correlation for 3D isotropic models . 143g3C.4.5 Rayl

41、eigh fading for 3D isotropic models . 144g3C.4.6 Isotropy for 3D isotropic models 145g3C.4.7 Summary for 3D Isotropic Models . 147g3Annex D: Environmental requirements . 148g3D.1 Scope 148g3D.2 Ambient temperature 148g3D.3 Operating voltage . 148g3Annex E: DUT orientation conditions 149g3E.1 Scope 1

42、49g3E.2 Testing environment conditions . 149g3Annex F: Calibration . 155g3F.1 Scope 155g3F.2 Calibration Procedure Anechoic chamber method with multiprobe configuration . 155g3F.2.1 Example Calibration Procedure 155g3F.3 Calibration Procedure Reverberation chamber method. 157g3F.3.1 Measurement of S

43、-parameters through the chamber for a complete stirring sequence 157g3F.3.2 Calculation of the chamber reference transfer function 158g3F.3.3 Cable calibration 158g3F.4 Calibration Procedure: RTS method 159g3Annex G: Change history 161g3History 163g3ETSI ETSI TR 137 977 V13.3.0 (2016-04)73GPP TR 37.

44、977 version 13.3.0 Release 13Foreword This Technical Report has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the pr

45、esent document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under c

46、hange control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 137 977 V13.3.0 (2016-04)83GPP TR 37.977 version 13

47、.3.0 Release 131 Scope The present document is the technical report for the work item on MIMO OTA, which was approved at TSG RAN#55 13. The scope of the WI is to define a 3GPP methodology or set of comparable methodologies for measuring the radiated performance of multiple antenna reception and MIMO

48、 receivers in the UE. The test methodology should be relevant for HSPA and LTE technologies, with particular focus on handheld devices and devices embedded in laptop computers. RAN WG4 has been working on the study item “Measurement of radiated performance for MIMO and multi-antenna reception for HS

49、PA and LTE terminals“ with the objective to define a test methodology for measuring the radiated performance of MIMO and multi-antenna UE reception in UMTS and LTE. RAN4 has done sufficient work to be confident that the definition of a meaningful test methodology is feasible; however RAN4 does not have sufficient evidence yet to conclude on a single test methodology that would fulfil all requirements for standardisation, and the standardisation of multiple test methodologies may be one eventual outcome, with a view to avoid differences in the decision of what is a “