ETSI TR 145 050-2018 Digital cellular telecommunications system (Phase 2+) (GSM) GSM EDGE Background for Radio Frequency (RF) requirements (V15 0 0 3GPP TR 45 050 version 15 0 0 Re.pdf

1、 ETSI TR 145 050 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); GSM/EDGE Background for Radio Frequency (RF) requirements (3GPP TR 45.050 version 15.0.0 Release 15) TECHNICAL REPORT GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TR 145 050 V15.0.0 (2018-07)13GPP TR

2、 45.050 version 15.0.0 Release 15Reference RTR/TSGR-0645050vf00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0

3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without

4、the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the p

5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comme

6、nt to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. Th

7、e content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefi

8、t of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TR 145 050 V1

9、5.0.0 (2018-07)23GPP TR 45.050 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members

10、and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org

11、/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pre

12、sent document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and

13、/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present

14、document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/w

15、ebapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and

16、“must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 145 050 V15.0.0 (2018-07)33GPP TR 45.050 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 22g31 Scope 23g31.1 General . 23g31.2 Refer

17、ences 23g32 Information available . 23g33 DCS1800 system scenarios 23g34 GSM900 small cell system scenarios . 24g35 GSM900 and DCS1800 microcell system scenarios 24g36 Conversion factors 25g37 Repeaters 26g38 Error Patterns for Speech Coder Developments . 26g39 Simulations of Performance . 26g310 GS

18、M900 railway system scenarios 26g311 Simulation results for GPRS receiver performance . 27g312 Pico BTS RF scenarios . 27g313 CTS system scenarios . 27g314 GSM400 system scenarios . 27g315 MXM system scenarios 27g316 LCS scenarios . 28g317 8-PSK Scenarios . 28g318 T-GSM 900 System Scenarios . 28g319

19、 MBMS System Scenarios . 28g320 T-GSM 810 System Scenarios . 28g321 Multicarrier BTS Class . 28g322 ER-GSM band introduction 28g323 Extended Training Sequence Code Sets . 28g323.1 Background 28g323.2 Extended TSC Sets . 29g323.2.1 Scope 29g323.2.2 Design criteria . 29g323.2.3 Design methodology . 29

20、g323.2.4 Evaluation methodology . 29g323.2.5 Performance evaluation 30g324 Machine-type-communication (MTC) deployment, including EC-GSM-IoT, in a reduced BCCH spectrum allocation. 30g324.1 Introduction 30g324.2 Simulation campaign 30g324.2.1 Introduction. 30g324.2.2 Idle mode procedures 31g3ETSI ET

21、SI TR 145 050 V15.0.0 (2018-07)43GPP TR 45.050 version 15.0.0 Release 1524.2.2.1 General 31g324.2.2.1.1 Simulator support 31g324.2.2.1.2 Performance metrics 32g324.2.2.1.3 Simulation assumptions . 32g324.2.2.2 PLMN selection 32g324.2.2.3 Cell selection . 33g324.2.2.3.1 General 33g324.2.2.3.2 GPRS/EG

22、PRS . 33g324.2.2.3.3 EC-GSM-IoT . 34g324.2.2.4 Cell reconfirmation . 35g324.2.2.4.1 GPRS/EGPRS . 35g324.2.2.4.2 EC-GSM-IoT 37g324.2.3 Common control channel performance . 39g324.2.3.1 General 39g324.2.3.2 GPRS/EGPRS . 39g324.2.3.2.1 Resource usage 39g324.2.3.2.2 Common control signaling delay . 40g3

23、24.2.3.2.3 Failed attempts 40g324.2.3.3 EC-GSM-IoT 40g324.2.3.3.1 Resource usage 40g324.2.3.3.2 Common control signaling delay . 41g324.2.3.3.3 Failed attempts 41g324.2.3.3.4 Coverage class distribution 41g324.2.4 Data traffic and control channel performance . 42g324.2.4.1 General 42g324.2.4.2 GPRS/

24、EGPRS . 42g324.2.4.2.1 PDCH resource usage 42g324.2.4.2.2 Latency 42g324.2.4.2.4 Failed Attempts . 43g324.2.4.2.5 Capacity . 43g324.2.4.3 EC-GSM-IoT 43g324.2.4.3.1 PDCH resource usage 43g324.2.4.3.2 Latency of MAR periodic reports 43g324.2.4.3.3 Latency of Downlink Application Ack 44g324.2.4.3.3 Fai

25、led attempts 44g324.2.4.3.4 Capacity . 44g324.2.4.3.5 Coverage Class Distribution 45g324.3 Conclusion 45g3Annex A: DCS1800 System scenarios. 47g3A.0 INTRODUCTION 47g3A.1 SCENARIO 1 - SINGLE BTS AND MS . 47g3A.1.1 Constraints 47g3A.1.1.1 Frequency Bands and Channel Arrangement (Clause 2 of GSM 05.05)

26、 47g3A.1.1.2 Proximity 48g3A.1.1.3 Range 48g3A.1.3 Inputs needed 49g3A.2 SCENARIO 2 - MULTIPLE MS AND BTS, COORDINATED 49g3A.2.1 Constraints 49g3A.2.3 Inputs needed 50g3A.3 SCENARIO 3 - MULTIPLE MS AND BTS, UNCOORDINATED . 51g3A.3.1 Constraints 51g3A.3.3 Inputs needed 51g3A.4 SCENARIO 4 - COLOCATED

27、MS . 52g3A.4.1 Constraints 52g3A.4.3 Inputs needed 53g3A.5 SCENARIO 5 - COLOCATED BTS . 53g3A.5.1 Constraints 53g3ETSI ETSI TR 145 050 V15.0.0 (2018-07)53GPP TR 45.050 version 15.0.0 Release 15A.5.3 Inputs needed 53g3A.6 SCENARIO 6 - COLOCATION WITH OTHER SYSTEMS . 54g3A.6.1 Constraints 54g3A.6.3 In

28、puts needed 54g3A.7 Title: Justifications for the proposed Rec. 05.05_DCS 55g3A.7.1 Transmitter . 56g3A.7.1.1 Modulation, Spurs and Noise 56g3A.7.1.1.1 Co-ordinated, BTS - MS (Scenario 2, figure 2.1) . 56g3A.7.1.1.2 Uncoordinated, BTS - MS (Scenario 3, figure 3.1) 56g3A.7.1.1.3 Co-ordinated 2 presen

29、ted to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in t

30、he document. ETSI ETSI TR 145 050 V15.0.0 (2018-07)233GPP TR 45.050 version 15.0.0 Release 151 Scope 1.1 General The present document gives background information on how the RF requirements of GSM400, GSM900 and DCS 1800 systems have been derived. 1.2 References The following documents contain provi

31、sions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific

32、reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 45.820, “Cellular System Support for Ultra Low Com

33、plexity and Low Throughput Internet of Things“ 2 3GPP TS 45.001, “Physical layer on the radio path;General description“ 3 3GPP TS 45.003, “Channel coding“ 4 3GPP TS 45.004, “Modulation“ 2 Information available The present document collects together temporary documents of ETSI SMG and STC SMG2 and 3G

34、PP GERAN which can be seen as base line material for the RF requirements in GSM 05.05. The documents are divided into several clauses In each clause there is a short description of the documents. The documents themselves are annexed to this report. A list of phase 2 change requests to SMG2 related d

35、ocuments are annexed to the SMG meeting reports. 3 DCS1800 system scenarios There are two documents describing the basis of the DCS1800 RF requirements. They are: - DCS1800 System scenarios (TDoc SMG 259/90, reproduced as TDoc SMG 60/91). - Justifications for the DCS1800 05.05 (TDoc SMG 260/90, revi

36、sed as TDoc SMG 60/91). These documents have been derived first by the UK PCN operators and later by GSM2 ad hoc group working on DCS 1800 requirements during 1990. The documents were presented to TC SMG in October 1990. DCS1800 System Scenarios describes six scenarios which are considered to be the

37、 relevant cases for DCS1800. The six scenarios described are: - Single MS - Single BTS. - Multiple MSs - Multiple co-ordinated BTSs. - Multiple MSs - Multiple uncoordinated BTSs. - Co-located MSs, co-ordinated/uncoordinated. - Co-located BTSs, co-ordinated/uncoordinated. ETSI ETSI TR 145 050 V15.0.0

38、 (2018-07)243GPP TR 45.050 version 15.0.0 Release 15- Co-location with other systems. On each of these scenarios the system constraints related to the scenario are described, the RF requirements affected by the scenario are identified and the input information needed to study the scenario in detail

39、is listed. Justifications for the DCS1800 05.05 includes the analysis of the system scenarios to detailed RF requirements and presents and justifies the proposed changes to GSM 05.05 for DCS1800. In the analysis part the relevant scenario calculations are made for each RF requirement and the most cr

40、itical scenario requirement identified. The justification part then looks at the identified scenario requirement, compares it to the corresponding existing GSM900 requirement and taking also into account the implementation issues and finally gives reasoning to the proposed change of the specific RF

41、requirement. These documents are in annex A. The DCS1800 requirements were originally developed for Phase 1 as a separate set of specifications, called DCS-specifications. For Phase two the DCS1800 and GSM900 requirements are merged. The main Phase 2 change requests of SMG2 in which the requirements

42、 for the DCS1800 system were included into are listed below. - CR 05.01-04 Combination of GSM900 and DCS1800 specifications. - CR 05.05-37 rev1 Combination of 05.05 (GSM900) and 05.05-DCS (DCS1800) specifications. - CR 05.08-55 rev1 Combination of GSM900 and DCS1800 and addition of National roaming.

43、 Further development of the DCS1800 requirements for Phase 2 can be found in the other Phase 2 CRs of SMG2, the vast majority of which are valid both for DCS1800 and GSM900. The list of Phase 2 CRs of SMG2 can be found in annex E. 4 GSM900 small cell system scenarios There is one document which disc

44、usses the small cell system scenarios for GSM900. The document is: - Small cell system scenarios for GSM900 (TDoc SMG2 104/92, revised as TDoc SMG2 104/92 rev1). Small cell system scenarios for GSM900 uses the DCS1800 system scenarios and justification document and derives from them the scenario req

45、uirements for GSM900 small cells. It also calculates the worst case requirements based on minimum coupling loss of 59 dB. The document on GSM900 small cell system scenarios is in annex B. CR 03.30-02 on “Propagation models for different types of cells“ gives a definition for a small cell and the typ

46、ical cell parameters to calculate the propagation loss in a small cell. 5 GSM900 and DCS1800 microcell system scenarios GSM900 and DCS1800 microcells have been discussed by SMG2 in various meetings since late 1991. In SMG2#2 (May 1992) a small group was formed to collect together the various documen

47、ts and make a proposal for the microcell RF parameters. As agreed by SMG2 there should be four microcell specific requirements, namely: - transmit power; - receive sensitivity; - wideband noise; - blocking. ETSI ETSI TR 145 050 V15.0.0 (2018-07)253GPP TR 45.050 version 15.0.0 Release 15As a result o

48、f the subgroup and other SMG2 activities there are three documents which can be used as baseline material for the microcell requirements. They are: - Microcell BTS RF parameters (TDoc SMG2 163/92); - Comments and proposals on Microcell RF parameters (TDoc 144/92); - Revised proposal for microcell RF

49、 parameters (TDoc SMG2 ad hoc 4/92). Microcell BTS RF parameters and Comments and proposals on Microcell RF parameters are joint papers giving the microcell scenarios and the requirements. The first one describes the two microcell scenarios, namely range and proximity, and presents the method to derive the detailed requirements starting from the scenarios. The latter document includes some corrections/updates to the scenarios, and proposes the detailed requirements. As described in the documents there are three classes of microcells, depending on the expected Minimum