ETSI TS 100 392-5-2018 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) and Direct Mode Operation (DMO) Part 5 Peripheral Equipment Interface (PEI) (V2 6 1).pdf

1、 ETSI TS 100 392-5 V2.6.1 (2018-06) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI) TECHNICAL SPECIFICATION ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)2Reference RTS/TCCE-03254 Keywords data, interface, TETRA, V+D, vo

2、ice ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from

3、: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perce

4、ived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revis

5、ion or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Commit

6、eeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written au

7、thorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for t

8、he benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)3Contents Intellectual Property Rights 22g3Foreword . 22g

9、3Modal verbs terminology 23g31 Scope 24g32 References 24g32.1 Normative references . 24g32.2 Informative references 26g33 Symbols and abbreviations . 26g33.1 Symbols 26g33.2 Abbreviations . 27g34 Overview of TETRA PEI . 30g34.1 Introduction 30g34.2 Protocol architecture. 31g34.3 Context model 32g34.

10、4 Void 35g34.5 SDS Message stacks . 35g34.5.0 General on SDS Message stacks . 35g34.5.1 Status message texts 35g34.5.2 SDS 1 message texts . 35g34.5.3 Status and SDS types 1, 2 and 3 . 35g34.5.4 SDS type 4 36g34.6 Phone books . 36g34.7 Reserved status values considerations 36g34.8 SDS-TL considerati

11、ons 36g34.9 AT commands 37g34.9.1 General on AT commands 37g34.9.2 AT command state 39g34.9.3 AT circuit mode data state 39g34.9.4 TNP1 and packet data state . 40g34.9.5 Transitions between states 40g34.9.5.1 Transition from AT command state to AT circuit mode data state . 40g34.9.5.2 Transition fro

12、m AT circuit mode data state to AT command state . 40g34.9.5.3 Transition from AT command state to TNP1 or packet data state 41g34.9.5.4 Transition from TNP1 and packet data state to AT command state 41g34.10 TNP1 and IP network layer 41g34.10.1 General operation 41g34.10.2 IP addressing . 41g34.10.

13、3 Local mode . 42g34.10.4 Wide mode 42g34.11 TNP1 operation 42g34.12 Link start up at the MT . 43g35 Physical layer . 43g35.1 General on physical layer . 43g35.2 Physical layer for V.24/V.28 44g35.2.1 Electrical characteristics for V.24/V.28 44g35.2.2 Physical connection 44g35.2.3 Character format .

14、 45g35.2.4 Data transmission rate for V.24/V.28 . 45g35.3 Wire-line high rate connectivity technologies 45g35.3.1 General 45g35.3.2 Universal Serial Bus . 46g35.3.3 USB On-The-Go . 47g35.4 Wireless high rate connectivity 47g3ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)45.4.1 General 47g35.4.2 Wireless Se

15、curity 47g35.4.3 Certified Wireless USB 48g35.4.4 Bluetooth 48g36 AT command set 48g36.1 General on AT command set 48g36.2 Limitations . 49g36.3 SDS user data . 49g36.4 AT command syntax 50g36.4.1 General on AT command syntax 50g36.4.2 Command line . 50g36.4.2.0 Command line structure 50g36.4.2.1 Pr

16、efix . 50g36.4.2.2 Body 50g36.4.2.3 Termination Character 50g36.4.2.4 Concatenating extended commands 50g36.4.2.5 Multiline extended commands 50g36.4.3 Command types 51g36.4.4 Parameters. 52g36.4.5 AT command examples 52g36.4.6 Information responses and result codes 53g36.4.6.1 General on informatio

17、n responses and result codes 53g36.4.6.2 Information Responses 53g36.4.6.3 Result Code . 53g36.4.6.4 AT result examples in verbose mode 54g36.4.6.5 AT result examples in numeric mode 56g36.4.6.6 Aborting information results and result codes. 57g36.4.6.7 Unsolicited nested responses . 57g36.4.7 Handl

18、ing of unknown parameters . 59g36.5 Existing V.250 commands for call control . 60g36.5.1 Commands 60g36.5.2 Result Codes . 60g36.5.3 Dialled string and user identity . 61g36.6 Existing V.250 commands for PEI control . 61g36.6a Modified V.250 commands for PEI control . 62g36.6a.1 General on modified

19、V.250 commands for PEI control 62g36.6a.2 Line termination character: S3 62g36.6a.2.1 General on S3 62g36.6a.2.2 Description 62g36.6a.2.3 S3 set syntax 62g36.6a.2.4 S3 read syntax . 62g36.6a.2.5 S3 read result code text . 62g36.6a.2.6 S3 test syntax 63g36.6a.2.7 S3 test result syntax . 63g36.6a.3 Re

20、sponse formatting character: S4 . 63g36.6a.3.1 General on S4 63g36.6a.3.2 Description 63g36.6a.3.3 S4 set syntax 63g36.6a.3.4 S4 read syntax . 63g36.6a.3.5 S4 read result code text . 63g36.6a.3.6 S4 test syntax 63g36.6a.3.7 S4 test result syntax . 63g36.6a.4 Line editing character: S5 . 64g36.6a.4.1

21、 General on S5 64g36.6a.4.2 Description 64g36.6a.4.3 S5 set syntax 64g36.6a.4.4 S5 read syntax . 64g36.6a.4.5 S5 read result code text . 64g36.6a.4.6 S5 test syntax 64g36.6a.4.7 S5 test result syntax . 64g36.6a.5 Echo: E . 64g3ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)56.6a.5.1 General on E 64g36.6a.5.

22、2 Description 65g36.6a.5.3 E set syntax . 65g36.6a.5.4 E read syntax . 65g36.6a.5.5 E read result code text . 65g36.6a.5.6 E test syntax 65g36.6a.5.7 E test result syntax 65g36.6a.6 Result code suppression: Q . 65g36.6a.6.1 General on Q . 65g36.6a.6.2 Description 65g36.6a.6.3 Q set syntax . 65g36.6a

23、.6.4 Q read syntax 66g36.6a.6.5 Q read result code text . 66g36.6a.6.6 Q test syntax 66g36.6a.6.7 Q test result syntax 66g36.6a.7 MT response format: V . 66g36.6a.7.1 General on V . 66g36.6a.7.2 Description 66g36.6a.7.3 V set syntax . 66g36.6a.7.4 V read syntax 66g36.6a.7.5 V read result code text .

24、 66g36.6a.7.6 V test syntax 67g36.6a.7.7 V test result syntax 67g36.6a.8 Circuit 109 (DCD) behavior: Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr

25、.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential t

26、o the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trad

27、emark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee TETRA and Critical

28、Communications Evolution (TCCE). The present document is part 5 of a multi-part deliverable covering the Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO), as identified below: Part 1: “General network design“; Part 2: “Air Interface (AI)“; Part 3: “Interworkin

29、g at the Inter-System Interface (ISI)“: Part 4: “Gateways basic operation“; Part 5: “Peripheral Equipment Interface (PEI)“; Part 7: “Security“; Part 9: “General requirements for supplementary services“; Part 10: “Supplementary services stage 1“; Part 11: “Supplementary services stage 2“; Part 12: “S

30、upplementary services stage 3“; Part 13: “SDL model of the Air Interface (AI)“; Part 14: “Protocol Implementation Conformance Statement (PICS) proforma specification“; Part 15: “TETRA frequency bands, duplex spacings and channel numbering“; Part 16: “Network Performance Metrics“; Part 17: “TETRA V+D

31、 and DMO specifications“; Part 18: “Air interface optimized applications“. ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)23NOTE 1: Part 3, sub-parts 6 and 7 (Speech format implementation), part 4, sub-part 3 (Data networks gateway), part 10, sub-part 15 (Transfer of control), part 13 (SDL) and part 14 (PIC

32、S) of this multi-part deliverable are in status “historical“ and are not maintained. NOTE 2: Some parts are also published as Technical Specifications such as ETSI TS 100 392-2 22 and those may be the latest version of the document. Modal verbs terminology In the present document “shall“, “shall not

33、“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct cita

34、tion. ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)241 Scope The present document specifies the functional and technical aspects of TETRA Peripheral Equipment Interface (PEI) that is the interface between a Terminal Equipment type 2 (TE2) and a Mobile Termination type 2 (MT2) at reference point RT. 2 Refe

35、rences 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including a

36、ny amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term vali

37、dity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 300 392-1: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 1: General network design“. 2 ETSI TS 101 369 (V7.2.0): “Digital cellular telecommunications system (Phase 2+); Ter

38、minal Equipment to Mobile Station (TE-MS) multiplexer protocol (3GPP TS 07.10 version 7.2.0 Release 1998)“. 3 ETSI EN 300 392-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. 4 Recommendation ITU-T V.24: “List of definitions for interchange circuits between

39、data terminal equipment (DTE) and data circuit-terminating equipment (DCE)“. 5 Recommendation ITU-T V.250: “Serial asynchronous automatic dialling and control“. 6 Recommendation ITU-T V.28: “Electrical characteristics for unbalanced double-current interchange circuits“. 7 Void. 8 Recommendation ITU-

40、T T.50: “International Reference Alphabet (IRA) (Formerly International Alphabet No. 5 or IA5) - Information technology - 7-bit coded character set for information interchange“. 9 ETSI TS 127 007 (V12.8.0) (2015-04): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommun

41、ications System (UMTS); LTE; AT command set for User Equipment (UE) (3GPP TS 27.007 version 12.8.0 Release 12)“. 10 IETF RFC 1661: “The Point-to-Point Protocol (PPP)“. 11 IETF RFC 1662: “PPP in HDLC-like Framing“. 12 ETSI EN 300 392-9: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part

42、9: General requirements for supplementary services“. 13 Recommendation ITU-T E.164: “The international public telecommunication numbering plan“. ETSI ETSI TS 100 392-5 V2.6.1 (2018-06)2514 ETSI EN 300 812-3: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (SIM-ME)

43、interface; Part 3: Integrated Circuit (IC); Physical, logical and TSIM application characteristics“. 15 ETSI ES 200 812-2: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (TSIM-ME) interface; Part 2: Universal Integrated Circuit Card (UICC); Characteristics of the

44、TSIM application“. 16 ETSI ETS 300 392-12-7: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 7: Short Number Addressing (SNA)“. 17 ETSI EN 300 392-12-16: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary ser

45、vices stage 3; Sub-part 16: Pre-emptive Priority Call (PPC)“. 18 ISO 8859-1: “Information technology - 8-bit single-byte coded graphic character sets - Part 1: Latin alphabet No. 1“. 19 Recommendation ITU-T T.35: “Procedure for the allocation of ITU-T defined codes for non-standard facilities“. 20 E

46、TSI EN 300 392-7: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 7: Security“. 21 ETSI EN 300 392-12-8: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 8: Area Selection (AS)“. 22 ETSI TS 100 392-2: “Terrestrial Trunked Ra

47、dio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. 23 ETSI TS 100 392-7: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 7: Security“. 24 ETSI TS 100 392-15: “Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D); Part 15: TETRA frequency bands, duplex spacings and ch

48、annel numbering“. 25 ETSI EN 300 396-3: “Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol“. 26 ETSI EN 300 396-6: “Terrestrial Trunked Radio (TETRA); Direct Mode Operation (DMO); Pa

49、rt 6: Security“. 27 Recommendation ITU-T V.42bis: “Data compression procedures for data circuit-terminating equipment (DCE) using error correction procedures“. 28 USB Implementers Forum, Inc.: “Universal Serial Bus (USB) Specification, Revision 2.0“ NOTE: Available at: http:/www.usb.org. 29 USB Implementers Forum Inc.: “On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification Revision 2.0 version 1.1“. NOTE: Available at: http:/www.usb.org/developers/onthego/USB_OTG_and_EH_2-0.pdf. 30 USB Implem