ETSI TS 100 542-1999 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services Stage 2 (GSM 03 81 Version 7 0 1 Release 1998)《数字蜂窝通信系统(第2+阶段).pdf

1、STD-ETSI TS LOO 542-ENGL 1999 I 3400855 042b203 226 E ETSI TS 1 O0 542 V7.0.1 (1999-07) Technical Specification Digital cellular telecommunications system (Phase 2+); Line identification supplementary services; Stage 2 (GSM 03.81 version 7.0.1 Release 1998) STD-ETSI TS LOO 542-ENGL L777 W 3400855 04

2、2b204 LbZ (GSM 03.81 version 7.0.1 Release 1998) 2 ETSI TS 1 O0 542 V7.0.1 (1999-07) Reference RTS/SMG-030381 Q7 (50003iOr.P DF) Kevwords Digital cellular telecommunications system, Global System for Mobile communications (GSM) ETSI Postal address F-O6921 Sophia Antipolis Cedex - FRANCE Office addre

3、ss 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistre a la Sous-Prfecture de Grasse (06) No 7803/88 Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Internet secretariat Qetsi.fr Individual copies of this ETSI de

4、liverable can be downloaded from httpYhw.etsi.org If you find errors in the present document, send your comment to: editorQetsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all me

5、dia. O European Telecommunications Standards Institute 1999. All rights reserved. STD=ETSI TS LOO 542-ENGL L999 m 3400855 042b205 UT7 W (GSM 03.81 version 7.0.1 Release 1998) 3 ETSI TS 1 O0 542 V7.0.1 (1999-07) Contents Intellectual Property Right 5 5 6 nitions and abbreviations . 0.2.1.1 Definition

6、 of line identity 6 0.2.1.2 Definition of presentation and screening indicators 7 0.2.2 Abbreviations . 7 1 1.1 1.1.1 I . 2 1.2.1 1.2.2 1.2.3 1.2.4 1.3 1.4 1.5 1.6 1.7 2 2 .I 2.1.1 2.1.2 2.1.3 2.1.4 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Calling line identification presentation (CLIP) . 7 Handling of calling l

7、ine identificati Functions and information flows Optional capability to carry call Information elements used in the message Parameters in Send Routeing In Messages between MSC and VLR in destination network . 19 Information stored in the HLR . 19 State transition model 19 Transfer of information fro

8、m HLR to VLR . 20 Information stored in the VLR . 20 Handover 20 Calling line identification restriction (CLIR) 20 Interrogation . . 21 Functions and information flows 22 Information stored in the HLR . 27 State transition model . . 27 Transfer of information from HLR to VLR . 27 Information stored

9、in the VLR . 27 Handover 28 Interworking . 28 3 Connected line identification presentation (COLP) . 28 3.1 Handling of connected line identification presentation 28 3.1.1 Interrogation . 28 3.1.2 Interactions with call forwarding supplementary services 29 3.2 Functions and information flows . 29 3.3

10、 Information stored in the HLR . 34 3.4 State transition model 34 3.5 Transfer of information from HLR to VLR . 34 3.6 Information stored in the VLR . 34 Handover 35 3.7 4 4.1 4.1.1 4.1.2 4.2 4.3 4.4 4.5 Connected line identification restriction (COLR) . 35 Handling of connected line identification

11、restriction . 35 State transition model . . ETSI (GSM 03.81 version 7.0.1 Release 1998) 4 ETSI TS 1 O0 542 V7.0.1 (1999-07) 4.6 Information stored in the VLR 39 4.1 Handover 39 4.8 Interworking . . 39 Annex A (informative): Change Request History . 40 . History . . 41 ETSI STDmETSI TS 100 542-ENGL I

12、 3400855 042b207 971 I (GSM 03.81 version 7.0.1 Release 1998) 5 ETSI TS 1 O0 542 V7.0.1 (1 999-07) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly avai

13、lable for ETSI members and non-members, and can be found in SR 000 3 14: “intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notved to ESi in respect of ETSI standards“, which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI

14、Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may

15、become, essential to the present document. Foreword This Technical Specification (TS) has been produced by the Special Mobile Group (SMG). The present document defines the stage 2 of the line identification supplementary services for the Digital cellular telecommunications system. The contents of th

16、e present document is subject to continuing work within SMG and may change following formal SMG approval. Should SMG modify the contents of the present document it will be re-released with an identifying change of release date and an increiise in version number ils follows: Version 7.x.y where: 7 in

17、dicates Release 1998 of GSM Phase 2+ x the second digit is incremented for all changes of substance, i.e. technical enhancements. corrections, updates, etc. y the third digit is incremented when editorial only changes have been incorporated in the specification. The specification from which the pres

18、ent document has been derived was originally based on CEFT documentation, hence the presentation of the present document may not be entirely in accordance with the ETSIPNE rules. STD-ETSI TS 100 542-ENGL 1999 3400855 O426208 808 111 (GSM 03.81 version 7.0.1 Release 1998) 6 ETSI TS 1 O0 542 V7.0.1 (1

19、999-07) O Scope The present document gives the stage 2 description of the call identification supplementary services. The group line identification supplementary services are divided into the following four supplementary services: - Calling line identification presentation CLIP (clause 1); - Calling

20、 line identification restriction CLIR (clause 2); - Connected line identification presentation COLP (clause 3); - Connected line identification restriction COLR (clause 4). o. 1 References The following documents contain provisions which, through reference in this text, constitute provisions of the

21、present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall

22、also be taken to refer to later versions published as an EN with the same number. For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y). il GSM 01.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms”. GSM 03.1 1:

23、“Digital cellular telecommunications system (Phase 2+); Technical realization of supplementary services”. 21 0.2 Definit ions and abbreviations 0.2.1 Definitions For the purposes of the present document, the following terms and definitions apply. 0.2.1 .I Definition of line identity The line identit

24、y is made up of the following information units: - The subscribers international ISDNMSISDN number; - Optionally subaddress information. For mobile originated calls, the ISDNNSISDN shall always be provided within the network. The subaddress shall only be included if it is provided by the user (or us

25、er equipment). The calling line identity is the line identity of the calling party. The connected line identity is the line identity of the connected party. The additional calling line identity provides additional line information for the purpose of the calling line identification presentation servi

26、ce (CLIP). The additional connected line identity provides additional line information for the purpose of the connected line identification presentation service (COLP). ETSI STD-ETSI TS 100 542-ENGL 1794 E 3400855 0426207 744 m (GSM 03.81 version 7.0.1 Release 1998) 7 ETSI TS 100 542 V7.0.1 (1999-07

27、) For mobile originating calls the user (or user equipment) has no possibility to provide an additional line identity. For mobile terminating calls the user (or user equipment) has no possibility to provide an additional connected line identity. 0.2.1.2 Definition of presentation and screening indic

28、ators In addition to. or instead of, the line identity or additional line identity, the network may send a presentation indicator (PI) and/or a screening indicator (SI) or additional screening indicator (aSI) to the MS as follows: - Presentation Indicator: a) Presentation allowed; b) Presentation re

29、stricted; c) Number not available. - Screening indicatorhdditional Screening indicator: a) User provided, verified and passed; b) User provided, not screened; c) network provided. The screening indicator or additional screening indicator applies to the ISDN/MSISDN or the number given as additional l

30、ine identity respectively. 0.2.2 Abbreviations Abbreviations used in the present document are listed in GSM 01.04. 1 Calling line identification presentation (CLIP) 1 .I Handling of calling line identification presentation 1 .1.1 Interrogation Status check The mobile subscriber can request the statu

31、s of the supplementary service and be informed if the service is provided to hider. This procedure is illustrated in figure I. 1. MS MSC VLR HLR Release Complete I n Acknowledge Interrogate CLIP +I I Figure 1.1: interrogation of calling line identification presentation (GSM 03.81 version 7.0.1 Relea

32、se 1998) 8 ETSI TS 100 542 V7.0.1 (1999-07) 1.2 Functions and information flows The following Mobile Additional Functions have been identifed for the PLMN: MAFOO 1 Determination of the calling line identification presentation subscription The ability of a PLMN component to determine whether the supp

33、lementary service is provisioned for the mobile subscriber. See figure I .2. Location: VLR. MAFOO2 Determination of the calling party number for offering to the called party The ability of a PLMN component to determine and to forward the calling line identity and related indications to the called pa

34、rty. See figure 1.3. Location: destination MSC. The information flow is shown in figure 1.8 ETSI STD.ETSI TS LOO 542-ENGL L999 (GSM 03.81 version 7.0.1 Release 1998) 9 Process CLIP-MAF001 initiate hand ling of CLIP set provision indication = not prowsioned I H 3400855 04262LL 372 E ETSI TS 100 542 V

35、7.0.1 (1999-07) 381 -1 2(1) set provision Indication = provisioned no set override category = yes set override category =no G continue handling 4 CUP: Calling Line Identification Presentation. Figure 1.2: MAF001 Determination of calling line identification presentation subscription (VW ETSI STDmETSI

36、 TS 100 542-ENGL 1999 3400855 0426212 239 R ETSI TS 1 O0 542 V7.0.1 (1999-07) (GSM 03.81 version 7.0.1 Release 1998) 10 Process CLIP-MAF002 1- - 7 I I ,Figure 1.3 1 1 _I idle (7 - misime I yes * amiable 4 received ir no , frm VLR signaling r YS YS no no no A erridecatego additional ai additional pas

37、s additional 4 381-13(1) amiable 2 handling v CLIP Calling Lne Identiication Presentatbn. STDSETSI TS 100 542-ENGL 1999 I 3400855 0426233 375 = ETSI TS 100 542 V7.0.1 (1999-07) (GSM 03.81 version 7.0.1 Release 1998) 11 Figure 1.3: MAF002 Determination of the information for offering to the called pa

38、rty (destination MSC) Procedure CLI-MT-G MS C I- - - - - - 7. I I I L-J Numberand Generic Figure 1.4: Addition of line identification information to Send Routeing Info message ETSI STD-ETSI TS 300 542-ENGL 1999 M 3400855 042b21i4 O03 U (GSM 03.81 version 7.0.1 Release 1998) 12 ETSI TS 100 542 V7.0.1

39、 (1999-07) Procedure CLIL HLRLSetLC LI r-x Subscriber rmmirg outside home nfwmatiwi albwed to destination NW ai nfwmtion receivedfrwn GMSC Nurrberand Generic Figure 1.5: Addition of line identification information to Provide Roaming Number message STD-ETSI TS 100 542-ENGL (GSM 03.81 version 7.0.1 Re

40、lease 1998) 1999 111 3400855 042b215 T48 I 13 ETSI TS 100 542 V7.0.1 (1999-07) Procedure CLI-PRN-VLR I Na / Sbscrber roaming ouBi otherwise it shall be absent. The information element is present if GMSC received calling party number from originating network; otherwise it shall be absent. Table 1.2.3

41、.2: Messages between HLR and VLR Message Information element rie I sender 1 name Information element Required Information element description ETSI (GSM 03.81 version 7.0.1 Release 1998) 18 ETSI TS 1 O0 542 V7.0.1 (1999-07) Provide Roaming Number HLR Calling Party Number Generic Number c ,- I Refer t

42、o GSM 03.18 In addition: The information element is present iIHLR received calling parfy number from GMSC and MS B is outside of home countty; otherwise it shall beabsent. The information element is present if HLR received calling party number from GMSC and MS B is outside of home country; otherwise

43、 it shall be absent. ETSI STD.ETS1 TS LOO 542-ENGL 1999 W 3400855 042b221 24L ETSI TS 1 O0 542 V7.0.1 (i 999-07) (GSM 03.81 version 7.0.1 Release 1998) 19 1.2.4 Messages between MSC and VLR in destination network Table 1.2.4.1 : Messages between MSC and VLR Message Complete Call Process Call Waiting

44、 - Message sender VLR VLR Information element name Calling Party Number Generic Numher Calling Party Numher Generic Number Informa tion element Required C C Information element description Refer to GSM 03. I 8. in addition: The information element is present if it is stored in VLR, otherwise it shal

45、l be absent. The information element i$ present if it is stored in VLR; otherwise it shall be absent. Refer to GSM 03.1 X In addition: The information element is present ifit is stored in VLR, otherwise it shall be absent. The information element is present ifit is stored in VLR; otherwise it shall

46、he absent. 1.3 Information stored in the HLR CLIP may have the following logical states (refer to GSM 03.1 I for an explanation of the notation): Provisioning State Registration State Activation State HLR Induction State (Not Provisioned, Not Applicable, Not Active, Not Induced) (Provisioned, Not Ap

47、plicable, Active and Operative, Not Induced) The HLR shall store the logical state of CLIP (which shall be one of the valid states listed above) on a per subscriber basis. The HLR shall also store the subscription option “override category“ on a per subscriber basis. This parameter takes one of the

48、following values: - yes; - no. 1.4 State transition model The following figure shows the successful cases of transition between the applicable logical states of CLIP. The state changes are caused by actions of the service provider. Note that error cases are not shown in the diagram as they normally

49、do not cause a state change. Additionally, some successful requests may not cause a state change. Hence they are not shown in the diagram. ETSI STD-ETSI TS 100 542-ENGL 1999 3400855 0426222 188 I (GSM 03.81 version 7.0.1 Release 1998) 20 ETSI TS 1 O0 542 V7.0.1 (1 999-07) Provision Active and Operative Withdraw al Figure 1.9: State transition model for CLIP 1.5 Transfer of information from HLR to VLR If the provisioning state for CLIP is “Provisioned” then, when the subscriber registers on a VLR, the HLR shall send that VLR information about the log