ETSI TS 100 902-2000 Digital Cellular Telecommunications System (Phase 2+) Technical Realization of Short Message Service Cell Broadcast (SMSCB)《数字蜂窝通信系统(第2+阶段) 短消息业务蜂窝广播(SMSCB)的技术.pdf

1、ETSI TS 100 902 V7.4.0 (2000-09) Technical Specificafion Digital cellular telecommunications system (Phase 2+); Technical Realization of Short Message Service Cell Broadcast (SMSCB) (3GPP TS 03.41 version 7.4.0 Release 1998) 3GPP TS 03.41 version 7.4.0 Release 1998 1 ETSI TS 100 902 V7.4.0 (2000-09)

2、 Reference RTS/TSGT-020341740 Keywords GSM ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice In

3、dividual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Doc

4、ument Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the

5、 current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the

6、 foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being regist

7、ered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 2 ETSI TS 100 902 V7.4.0 (2000-09) Intellectual Property Rights IPRs essential or potentially e

8、ssential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs not

9、lJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of

10、 other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refe

11、r to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under www.etsi.ornkey . ETSI 3

12、GPP TS 03.41 version 7.4.0 Release 1998 3 ETSI TS 100 902 V7.4.0 (2000-09) Contents Intellectual Property Rights . .2 Foreword . 2 Foreword . 5 1 1.1 1.2 2 3 4 5 6 7 8 9 9.1 9.1.1 9.1.2 9.1.3 9.1.4 9.1.5 9.1.6 9.1.7 9.1.8 9.1.9 9.1.10 9.1.11 9.1.12 9.1.13 9.1.14 9.2 9.2.1 9.2.2 9.2.3 9.2.4 9.2.5 9.2

13、.5.1 9.2.5.2 9.2.6 9.2.7 9.2.8 9.2.9 9.2.10 9.2.11 9.2.12 9.2.13 9.2.14 9.2.15 9.2.16 9.2.17 9.2.18 Scope 6 3eneral descnption .7 :BE Functionality. .8 ,BC Functionality . .8 3SC Functionality. .9 3TS Functionality 9 MS Functionality . .9 References . . . 6 Abbreviations . . 7 Vetwork Architecture .

14、 7 T Protocols and Protocol Architecture . 10 CBC-BSC Primitives Identification of a messag STATUS-MESSAGE-QUERY Responce/Confirm . REJECT Response/Confirm . . 16 RE START -INDICATION Re que st/Indic at ion. . 16 RESET Request/Indicatioii . . 17 FAILURE -INDICATION Re que sthdicat ion . 17 SET-DRX R

15、equest/Indication . 17 SET-DRX- REPORT Response/Confirm . . 18 Parameters . . . 18 . . 18 . . 18 . . 18 . 18 18 19 19 Channel Indicator. . 19 19 20 No-of-Broadcasts-Requested . .20 No-of-Broadcasts-Completed-List 20 Cell-Identifier . 20 Schedule-Period 21 21 Reserved-Slots 21 Failure-List . Cause .

16、. Cell-List sent from BSC to CBC . CBCH-Loading-List . Diagnostic . Data Coding Scheme . . ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 4 ETSI TS 100 902 V7.4.0 (2000-09) 9.2.19 9.2.20 9.2.21 9.3 9.3.1 9.3.2 9.3.2.1 9.3.2.2 9.3.2.3 9.3.2.4 9.3.2.5 9.4 CBS-Message-Information-Page n . 23 CBS-Message

17、-Information-Length n . . 23 Recovery-Indication . . 23 General Description . . 23 Message Parameter .24 Serial Number .24 Message Identifier . 25 Data Coding Scheme . 26 Page Parameter. .26 Content of Message .26 CBS Compression . . 27 Message Format on BTS-MS Interface . . 23 10 CBS Index 28 Annex

18、 A (informative): Protocols for interconnecting CBC and BSC 30 Annex B (informative): Change History . 31 History . .32 ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 5 ETSI TS 100 902 V7.4.0 (2000-09) Foreword This Technical Specification (TS) has been produced by the Special Mobile Group (SMG). The

19、 present document defines the Cell Broadcast short message service (CBS). It defies the primitives over the Cell Broadcast Centre - Base Station System (CBC-BSS) interface and the message formats over the Base Station System - Mobile Station (BSS-MS) interface for Teleservice 23 within the digital c

20、ellular telecommunications system (Phase 2+). The contents of the present document are subject to continuing work within 3GPP TSG T and may change following formal 3GPP TSG T approval. Should 3GPP TSG T modiSl the contents of the present document it will then be republished by ETSI with an identiSli

21、ng change of release date and an increase in version number as follows: Version 7.x.y where: 7 indicates Release 1998 of GSM Phase 2+ x the second digit is incremented for changes of substance, i.e. technical enhancements, corrections, updates, etc. y the third digit is incremented when editorial on

22、ly changes have been incorporated in the specification. ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 6 ETSI TS 100 902 V7.4.0 (2000-09) 1 Scope The present document describes the Cell Broadcast short message service (CBS). It defies the primitives over the Cell Broadcast Centre - Base Station Syste

23、m (CBC-BSS) interface and the message formats over the Base Station System - Mobile Station (BSS-MS) interface for Teleservice 23 as specified in GSM 02.03 2. 1 .I References The following documents contain provisions which, through reference in this text, constitute provisions of the present docume

24、nt. References are either specific (identified by date of publication, edition number, version number, etc.) or non- specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken

25、 to refer to later versions published as an EN with the same number. For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y). il GSM O 1.04: “Digital cellular telecommunication system (Phase 2+); Abbreviations and acronyms“. GSM 02.03 : “Digital cell

26、ular telecommunication system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)“. GSM 03.3 8: “Digital cellular telecommunication system (Phase 2+);“Alphabets and language- specific information“. GSM 03.40: “Digital cellular telecommunication system (Phase 2+); Technical

27、realization of the Short Message Service (SMS) Point to Point (PP)“. GSM 03.47: “Digital cellular telecommunication system (Phase 2+); Example protocol stacks for interconnecting Service Centre(s) (SC) and Mobile-services Switching Centre(s) (MSC)“. GSM 03.49: “Digital cellular telecommunication sys

28、tem (Phase 2+); Example protocol stacks for interconnecting Cell Broadcast Centre (CBC) and Mobile-services Switching Centre (MSC)“. GSM 04.12: “Digital cellular telecommunication system (Phase 2+); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface“. GSM 05.02: “Digi

29、tal cellular telecommunication system (Phase 2+); Multiplexing and multiple access on the radio path“. GSM 07.05: “Digital cellular telecommunication system (Phase 2+); Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE) interface for Short Message Service (SMS) and Cell

30、Broadcast Service (CBS)“. GSM 08.52: “Digital cellular telecommunication system (Phase 2+); Base Station Controller - Base Transceiver Station (BSC - BTS) interface Interface principles“. GSM 08.58: “Digital cellular telecommunication system (Phase 2+); Base Station Controller - Base Transceiver Sta

31、tion (BSC - BTS) interface Layer 3 specification“. CCITT Recommendation X.2 10: “Open systems interconnection layer service definition conventions“. 21 31 41 51 61 71 SI 91 lo1 111 121 i31 GSM 08.08: “MSC-BSS Interface Layer 3 specification“. ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 7 ETSI TS 1

32、00 902 V7.4.0 (2000-09) i41 i51 GSM 03.42: “Compression algorithm for text messaging services“. GSM 03.48: “Digital cellular telecommunications system (Phase 2+); Security Mechanisms for the SIM application toolkit; Stage 2“. 1.2 Abbreviations Abbreviations used in the present document are listed in

33、 GSM O 1 .O4 i. 2 General description The CBS service is analogous to the Teletex service offered on television, in that like Teletex, it permits a number of unacknowledged general messages to be broadcast to all receivers within a particular region. CBS messages are broadcast to defined geographica

34、l areas known as cell broadcast areas. These areas may comprise of one or more cells, or may comprise the entire PLMN. Individual CBS messages will be assigned their own geographical coverage areas by mutual agreement between the information provider and the PLMN operator. CBS messages may originate

35、 from a number of Cell Broadcast Entities (CBEs), which are connected to the Cell Broadcast Centre. CBS messages are then sent from the CBC to the BTSs, in accordance with the CBSs coverage requirements. The CBS message comprises of 82 octets, which, using the default character set, equates to 93 ch

36、aracters. Up to 15 of these messages (pages) may be concatenated to form a macromessage. Each page of such macromessages will have the same message identifier (indicating the source of the message), and the same serial number. Using this information, the MS is able to identiSl and ignore re-broadcas

37、ts of already received messages. CBS messages are broadcast cyclically by the BTS at a frequency and for a duration agreed with the information provider. The frequency at which messages are repeatedly transmitted will be dependent on the information that they contain; for example, it is likely that

38、dynamic information such as road traffic information, will require more frequent transmission than weather information. The repetition period will also be affected by the desire for messages to be received by high speed mobiles which rapidly traverse cells. All suitably equipped mobiles within the c

39、atchment area of the transmitting BTS will be able to receive the broadcast messages, provided that they are switched on and in the idle state. CBS messages may be broadcast on two different cell broadcast channels, which are characterized by different QoS. A MS is always able to read the basic chan

40、nel (see SI). The reading of the extended channel may collide with other tasks of the MS. Therefore the probability of receiving a CBS message on the extended channel is smaller than on the basic channel. The reading of the extended channel for MSs is optional. The scheduling on the channels will be

41、 done independently. To permit mobiles to selectively display only those messages required by the MS user, CBS messages are assigned a message class which categorises the type of information that they contain and the language in which the message has been compiled. Through the use of appropriate MMI

42、, the user is then able to ignore message types that he does not wish to receive, e.g. advertising information or messages in an unfamiliar language. 3 Network Architecture The basic network structure of CBS is depicted by figure 1. ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 8 ETSI TS 100 902 V7.

43、4.0 (2000-09) outside scope of GSM Specs. / /I inside scope of GSM Specs. 1 CBE CBE 1 CBC 2 2 L BTSs ! MSs . 4 . MSs . Figure 1 - - - - message transfer on link 1 is outside the scope of GSM Specifications; message transfer on link 2 is described in subclause 9.1; message transfer on link 3 is descr

44、ibed in GSM 08.58; message transfer on link 4 is described in GSM 04.12 and the timing of messages transferred on link 4 is described in GSM 05.02. 4 CBE Functionality The functionality of the CBE is outside of the scope of GSM Specifications; however it is assumed that the CBE is responsible for al

45、l aspects of formatting CBS, including the splitting of a CBS message into a number of pages. 5 CBC Functionality As the CBC (and any originating point for cell broadcast short messages) is regarded as a node outside the PLMN, only the requirements placed upon the CBC by CBS functionality are specif

46、ied by this specification. The CBC may be connected to several BSCs. The CBC may be connected to several CBEs. The CBC shall be responsible for the management of cell broadcast short messages including: - allocation of serial numbers; - modif$ng or deleting messages held by the BSC; - initiating bro

47、adcast by sending fixed length cell broadcast short messages to a BSC for each language provided by the cell, and where necessary padding the message to a length of 82 octets see GSM 03.381; determining the set of cells/BTSs to which a message should be broadcast, and indicating within the Serial Nu

48、mber the geographical scope of each message; determining the time at which a message should commence being broadcast; - - - determining the time at which a message should cease being broadcast and subsequently instructing each BSC to cease broadcast of the message; determining the period at which br

49、oadcast of the message should be repeated; - ETSI 3GPP TS 03.41 version 7.4.0 Release 1998 9 ETSI TS 100 902 V7.4.0 (2000-09) - determining the cell broadcast channel, on which the message should be broadcast. To work efficiently on the interfaces, the BSC - which is normally controlling more than one cell of a broadcast area - should be used as a concentrator as far as CB message handling is concerned. Hence, the CBC should work on lists of cells when issuing CB related requests towards the BSC. 6 BSC Functionality The BSC shall interface to only one CB