ETSI TS 101 087-2009 Digital cellular telecommunications system (Phase 2+) Base Station System (BSS) equipment specification Radio aspects (V8 11 0 3GPP TS 11 21 version 8 11 0 Rel.pdf

1、 ETSI TS 101 087 V8.11.0 (2009-06)Technical Specification Digital cellular telecommunications system (Phase 2+);Base Station System (BSS) equipment specification;Radio aspects (3GPP TS 11.21 version 8.11.0 Release 1999)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 101 087 V8.11.0 (2009-06) 1

2、3GPP TS 11.21 version 8.11.0 Release 1999 Reference RTS/TSGG-011121v8b0 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de G

3、rasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, th

4、e reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision

5、or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Co

6、pyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON log

7、o and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3G

8、PP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 101 087 V8.11.0 (2009-06) 2 3GPP TS 11.21 version 8.11.0 Release 1999 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been

9、declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, w

10、hich is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs

11、not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technica

12、l specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.a

13、sp. ETSI ETSI TS 101 087 V8.11.0 (2009-06) 3 3GPP TS 11.21 version 8.11.0 Release 1999 Contents Intellectual Property Rights2 Foreword.2 Foreword.8 1 Scope 9 2 References 10 3 Definitions, abbreviations, frequency bands and channels.11 3.1 Definitions11 3.2 Abbreviations .12 3.3 Frequency bands and

14、channels .12 3.3.1 Frequency bands .12 3.3.2 Channels and channel numbering .13 4 General test conditions and declarations 13 4.1 Output power and determination of power class 13 4.2 Specified frequency range 14 4.3 Frequency hopping.14 4.4 RF power control14 4.5 Downlink discontinuous transmission

15、(DTX)14 4.6 Test environments 15 4.6.1 Normal test environment 15 4.6.2 Extreme test environment .15 4.6.2.1 Extreme temperature .15 4.6.3 Vibration.16 4.6.4 Power supply 16 4.7 Acceptable uncertainty of measurement equipment.16 4.8 Interpretation of measurement results 20 4.9 Selection of configura

16、tions for testing20 4.10 BTS Configurations21 4.10.1 Receiver diversity .21 4.10.2 Duplexers21 4.10.3 Power supply options22 4.10.4 Ancillary RF amplifiers 22 4.10.5 BSS using antenna arrays .23 4.10.6 BTS supporting 8-PSK modulation 24 5 Format and interpretation of tests.24 6 Transmitter .25 6.1 S

17、tatic Layer 1 functions25 6.1.1 Test purpose25 6.1.2 Test case .25 6.1.3 Essential conformance 25 6.1.4 Complete conformance .25 6.1.5 Requirement reference26 6.2 Modulation accuracy 26 6.2.1 Test purpose26 6.2.2 Test case .26 6.2.3 Essential conformance 27 6.2.4 Complete conformance .28 6.2.5 Requi

18、rement reference28 6.3 Mean transmitted RF carrier power28 6.3.1 Test purpose28 6.3.2 Test case .28 6.3.3 Essential conformance 29 6.3.4 Complete conformance .30 ETSI ETSI TS 101 087 V8.11.0 (2009-06) 4 3GPP TS 11.21 version 8.11.0 Release 1999 6.3.5 Requirement reference30 6.4 Transmitted RF carrie

19、r power versus time .30 6.4.1 Test purpose30 6.4.2 Test case .30 6.4.3 Essential conformance 31 6.4.4 Complete conformance .31 6.4.5 Requirement reference33 6.5 Adjacent channel power .33 6.5.1 Spectrum due to modulation and wideband noise.33 6.5.1.1 Test purpose 33 6.5.1.2 Test case33 6.5.1.3 Essen

20、tial Conformance34 6.5.1.4 Complete conformance .36 6.5.1.5 Requirement reference 36 6.5.2 Switching transients spectrum 36 6.5.2.1 Test purpose 36 6.5.2.2 Test case36 6.5.2.3 Essential conformance 38 6.5.2.4 Complete conformance .38 6.5.2.5 Requirement reference 38 6.6 Spurious emissions from the t

21、ransmitter antenna connector 38 6.6.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band.39 6.6.1.1 Test Purpose39 6.6.1.2 Test Case.39 6.6.1.3 Essential conformance 39 6.6.1.4 Complete conformance .39 6.6.1.5 Requirement Reference.39 6.6.2 Conducted sp

22、urious emissions from the transmitter antenna connector, outside the BTS transmit band 39 6.6.2.1 Applicability (Phase 2)39 6.6.2.1.1 Test Purpose 40 6.6.2.1.2 Test Case .40 6.6.2.1.3 Essential conformance.41 6.6.2.1.4 Complete conformance41 6.6.2.1.5 Requirement Reference .41 6.6.2.2 Applicability

23、(Phase 2+) .41 6.6.2.2.1 Test Purpose 41 6.6.2.2.2 Test Case .42 6.6.2.2.3 Essential conformance.43 6.6.2.2.4 Complete conformance43 6.6.2.2.5 Requirement Reference .44 6.6.2.3 Applicability (Phase 2+ Release 1999 GSM 400, GSM 900 and DCS 1800).44 6.6.2.3.1 Test Purpose 44 6.6.2.3.2 Test Case .44 6.

24、6.2.3.3 Essential conformance.45 6.6.2.3.4 Complete conformance45 6.6.2.3.5 Requirement Reference .45 6.7 Intermodulation attenuation (GSM 400, GSM 900 and DCS 1800) 45 6.7.1 Test purpose45 6.7.2 Test case .46 6.7.3 Essential Conformance .46 6.7.4 Complete conformance .47 6.7.5 Requirement reference

25、48 6.8 Intra Base Station System intermodulation attenuation48 6.8.1 Test purpose48 6.8.2 Test case .48 6.8.3 Essential conformance 49 6.8.4 Complete conformance .49 6.8.5 Requirement reference50 6.9 Intra Base Station System intermodulation attenuation, MXM 850 and MXM 1900 50 6.9.1 Test purpose50

26、6.9.2 Test cases50 ETSI ETSI TS 101 087 V8.11.0 (2009-06) 5 3GPP TS 11.21 version 8.11.0 Release 1999 6.9.2.1 200 kHz carriers-only50 6.9.2.2 200 kHz and ANSI-136 30 kHz carriers .50 6.9.3 Essential conformance 50 6.9.4 Complete conformance .51 6.9.5 Requirement reference51 6.10 Intra Base Station S

27、ystem intermodulation attenuation, PCS 1900 and GSM 850 .51 6.10.1 Test purpose51 6.10.2 Test case .51 6.10.3 Essential conformance 52 6.10.4 Complete conformance .52 6.10.5 Requirement reference52 6.11 Intermodulation attenuation (GSM 850, MXM 850, PCS 1900 and MXM 1900).52 6.11.1 Test purpose52 6.

28、11.2 Test case .52 6.11.3 Essential Conformance .53 6.11.4 Complete conformance .54 6.11.5 Requirement reference55 7 Receivers 55 7.1 Static Layer 1 receiver functions (nominal error ratios).55 7.1.1 Test Purpose55 7.1.2 Test Case.55 7.1.3 Essential conformance 57 7.1.4 Complete conformance .57 7.1.

29、5 Requirement Reference.58 7.2 Erroneous Frame Indication Performance58 7.2.1 Test Purpose58 7.2.2 Test Case.58 7.2.3 Essential conformance 59 7.2.4 Complete conformance .59 7.2.5 Requirement reference59 7.3 Static Reference Sensitivity Level59 7.3.1 Test Purpose59 7.3.2 Test Case.59 7.3.3 Essential

30、 conformance 61 7.3.4 Complete conformance .61 7.3.5 Requirements Reference .62 7.4 Multipath Reference Sensitivity Level .63 7.4.1 Test Purpose63 7.4.2 Test Case.63 7.4.3 Essential conformance 65 7.4.4 Complete conformance .66 7.4.5 Requirement Reference.70 7.5 Reference interference level .70 7.5.

31、1 Test Purpose70 7.5.2 Test Case.70 7.5.3 Essential conformance 73 7.5.4 Complete conformance .76 7.5.5 Requirements Reference .81 7.6 Blocking Characteristics.81 7.6.1 Test Purpose81 7.6.2 Test Case.81 7.6.3 Essential conformance 85 7.6.4 Complete conformance .86 7.6.5 Requirements reference 86 7.7

32、 Intermodulation characteristics 86 7.7.1 Test Purpose86 7.7.2 Test Case.87 7.7.3 Essential conformance 88 7.7.4 Complete conformance .88 7.7.5 Requirement Reference.89 7.8 AM suppression89 ETSI ETSI TS 101 087 V8.11.0 (2009-06) 6 3GPP TS 11.21 version 8.11.0 Release 1999 7.8.1 Test Purpose89 7.8.2

33、Test Case.89 7.8.3 Essential conformance 90 7.8.4 Complete conformance .91 7.8.5 Requirement Reference.91 7.9 Spurious emissions from the receiver antenna connector.91 7.9.1 Test Purpose91 7.9.2 Test Case.91 7.9.3 Essential conformance 91 7.9.4 Complete conformance .92 7.9.5 Requirement Reference.92

34、 8 Radiated spurious emissions 92 8.1 Test Purpose .92 8.2 Test Case 92 8.3 Essential conformance93 8.4 Complete conformance.94 8.5 Requirement reference .94 9 Radio link management94 9.1 General .94 9.2 Synchronization94 9.2.1 Timing Tolerance95 9.2.1.1 Test purpose 95 9.2.1.2 Test case95 9.2.1.3 E

35、ssential conformance 95 9.2.1.4 Complete conformance .95 9.2.1.5 Requirement reference 96 9.3 Frame structure.96 9.3.1 BCCH Multiframe 96 9.3.1.1 Test purpose 96 9.3.1.2 Test case96 9.3.1.3 Essential conformance 96 9.3.1.4 Complete conformance .96 9.3.1.5 Requirement reference 96 9.3.2 TDMA-frame st

36、ructure .97 9.3.2.1 Test purpose 97 9.3.2.2 Test case97 9.3.2.3 Essential conformance 97 9.3.2.4 Complete conformance .97 9.3.2.5 Requirement reference 97 9.4 Radio link measurements .97 9.4.1 Signal Strength98 9.4.1.1 Measurement Accuracy.98 9.4.1.1.1 Test purpose 98 9.4.1.1.2 Test case 98 9.4.1.1.

37、3 Essential conformance.98 9.4.1.1.4 Complete conformance98 9.4.1.2 Selectivity of signal strength measurements .99 9.4.1.2.1 Test purpose 99 9.4.1.2.2 Test case 99 9.4.1.2.3 Essential conformance.100 9.4.1.2.4 Complete conformance100 9.4.1.2.5 Requirement reference.100 9.4.2 Signal quality101 9.4.2

38、.1 Test purpose 101 9.4.2.2 Test case101 9.4.2.3 Essential conformance 101 9.4.2.4 Complete conformance .101 9.4.2.5 Requirement reference 102 9.4.3 Idle channel signal level .102 9.4.3.1 Test purpose 102 ETSI ETSI TS 101 087 V8.11.0 (2009-06) 7 3GPP TS 11.21 version 8.11.0 Release 1999 9.4.3.2 Test

39、 case102 9.4.3.3 Essential conformance 103 9.4.3.4 Complete conformance .103 9.4.3.5 Requirement reference 103 9.5 Adaptive frame alignment 103 9.5.1 Test purpose103 9.5.2 Test case .104 9.5.3 Essential conformance 104 9.5.4 Complete conformance .104 9.5.5 Requirement reference105 Annex A (informati

40、ve): Testing of statistical parameters.106 A.1 General theoretical methodology .106 A.2 Detailed theoretical methodology 108 A.3 Limitations and corrections to the theoretical methodology 109 A.3.1 Independent errors109 A.3.2 Gaussian distribution109 A.3.3 Stationary random processes 109 A.3.4 Low e

41、rror ratios110 A.3.5 Total corrections.110 A.4 Alternative experimental methodology 110 A.5 Detailed definition of error events111 Annex B (informative): Description of special test equipment.112 B.1 Base Station System Test Equipment (BSSTE) .112 B.1.1 Fading and multipath propagation simulator112

42、B.2 Measurement set ups for TX intermodulation112 B.2.1 Test set-up for Intermodulation Attenuation (6.7.).112 B.2.1.1 RX-Band.113 B.2.1.2 Outside RX Band113 B.2.2 Test set-up for Intra BSS Intermodulation Attenuation (6.8.) 114 B.2.2.1 RX-Band.114 B.2.2.2 TX-Band .114 Annex C (informative): Number

43、of samples needed for statistical testing115 C.1 GSM 900; Number of samples for testing115 C.2 DCS 1800; Number of Samples for Testing.136 Annex D (informative): Change history .157 History 160 ETSI ETSI TS 101 087 V8.11.0 (2009-06) 8 3GPP TS 11.21 version 8.11.0 Release 1999 Foreword This Technical

44、 Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the

45、 TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremen

46、ted for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 101 087 V8.11.0 (2009-06) 9 3GPP TS 11.21 version 8.11.0 Release 1999 1 Scope The present docume

47、nt specifies the Radio Frequency (RF) test methods and conformance requirements for GSM 400, GSM 900 and DCS 1800, PCS 1900, GSM 850, MXM 850 and MXM 1900 Base Station Systems (BSS)s. These have been derived from, and are consistent with, the core GSM specifications specified in the requirements ref

48、erence subclause of each test with the exception that requirements expressed as a reference to regulatory documents (e.g. FCC) have not been included in the present document. The present document is applicable to BSS meeting the requirements of either GSM Phase 2 or GSM Phase 2+. Unless otherwise st

49、ated, all tests are applicable to BSS meeting Phase 2 and/or Phase 2+ GSM requirements, because the requirements of the Phase 2 and Phase 2+ core GSM specifications which are referenced in the test are consistent. Most differences between Phase 2 and Phase 2+ requirements represent Phase 2+ features which are optional for the BSS to support. For each test, two conformance requirements are specified: - essential conformance requirements; - complete conformance requirements. Essential conformance requirements are those which are required: a) to ensure compatibility between the