ETSI TS 101 109-2002 Digital Cellular Telecommunications System (Phase 2+) Universal Geographical Area Description (GAD) (3GPP TS 03 32 Version 7 2 0 Release 1998)《数字蜂窝通信系统(阶段2+) 通.pdf

1、ETSI TS 101 109 V7.2.0 (2002-12) Technical Specification Digital cellular telecommunications system (Phase 2+); Universal Geographical Area Description (GAD) (3GPP TS 03.32 version 7.2.0 Release 1998) 3GPP TS 03.32 version 7.2.0 Release 1998 1 ETSI TS 101 109 V7.2.0 (2002-12) Reference RTSITSGS-0203

2、32720 Keywords GSM ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the p

3、resent document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In c

4、ase of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this

5、and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction e

6、xtend to reproduction in all media. O European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the ben

7、efit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 2 ETSI TS 101 109 V7.2.0 (2002-12) Intellectual Property Rights IPRs essential or potentially essential to the present

8、document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect

9、 ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Technical Specification (TS) has been produc

10、ed by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference betw

11、een GSM, UMTS, 3GPP and ETSI identities can be found under ht tn : Nweb ann. et si. og;kev/aiiervfom. asn . ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 3 ETSI TS 101 109 V7.2.0 (2002-12) Contents Intellectual Property Rights . .2 Foreword . 2 Foreword . 5 1 2 3 3.1 3.2 4 5 5.1 5.2 5.3 5.4 5.5 5.6

12、5.7 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 7 7.1 7.2 7.3 Scope 6 References . .6 Definitions and abbreviations. . .6 Definitions 6 Abbreviations . 6 Reference system . .7 Shapes . 7 Ellipsoid Point . Polygon . Ellipsoid Point with Alti . Ellipsoid Arc . Coding 12 Point . 12 Uncertainty . 12 Altitude . 13 Unc

13、ertainty Altitude . 13 Confidence . 13 Radius 13 Angle 14 d information elements coding 14 . 14 . 14 . 15 Ellipsoid point with unce . Ellipsoid point with unce . Ellipsoid point with altitude and uncertainty ellipsoid . 7.3.1 Ellipsoid Point . 16 7.3.2 Ellipsoid Point with uncertainty Circle . . 17

14、7.3.3 Ellipsoid Point with uncertainty Ellipse. . . 17 7.3.4 Polygon . . 18 7.3.5 Ellipsoid Point with Altitude Ellipsoid Point with altitude and uncertainty ellipsoid . 7.3.7 Ellipsoid Arc. . 20 8. Description of Velocity . .2 1 Horizontal Velocity 21 8.2 Horizontal and Vert elocity . .22 8.3 Horiz

15、ontal Velocity with Uncertainty . . .22 8.4 Horizontal and Vertical Velocity with Uncertainty. . .22 Coding Principles . . .22 Coding of Velocit . 23 8.7 Coding of Horizontal Speed 23 8.8 Coding of Bearin . .23 8.10 Coding of Vertical Speed Direction . .24 8.1 1 Coding of Uncertainty Speed . 8.1 1 C

16、oding of Horizontal Velocity . .24 8.12 Coding of Horizontal with Vertical Velocity . .24 8.13 Coding of Horizontal Velocity with Uncertainty . . 25 . 18 . 19 7.3.6 8.1 . 8.5 8.6 23 . .24 8.9 Coding of ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 4 ETSI TS 101 109 V7.2.0 (2002-12) 8.14 Annex A (inf

17、ormative): Element description in compact notation 27 Annex B (informative): Change history . 29 Coding of Horizontal with Vertical Velocity and Uncertainty . 25 History 30 ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 5 ETSI TS 101 109 V7.2.0 (2002-12) Foreword This Technical Specification (TS) has

18、 been produced by the 3d Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modiSl the contents of the present document, it will be re-released by the TSG with an ident

19、iSling change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all change

20、s of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 6 ETSI TS 101 109 V7.2.0 (2002-12) 1 Scope The present document defines an interm

21、ediate universal Geographical Area Description which subscriber applications or GSM services can use and the network can convert into an equivalent radio coverage map. For GSM services which involve the use of an “area“, it can be assumed that in the majority of cases the Service Requester will be f

22、orbidden access to data on the radio coverage map of a particular PLMN and that the Service Requester will not have direct access to network entities (e.g. BSC/BTS). The interpretation by the PLMN operator of the geographical area in terms of cells actually used, cells that are partly within the giv

23、en area and all other technical and quality of service aspects are out of the scope of the present document. This specification also provides a description of velocity that may be associated with a universal Geographical Area Description when both are applied to a common entity at a common time. 2 R

24、e fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent

25、 revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. For this Release 1998 document, references to GSM documents are for Release 1998 versions (ver

26、sion 7.x.y). il GSM O 1.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. GSM 04.07: “Digital cellular telecommunications system (Phase 2+); Mobile radio interface signalling layer 3 General aspects“. Military Standard WGS84 Metric MIL-STD-2401 (1 1 January 199

27、4): “Military Standard Department of Defence World Geodetic System (WGS)“. 21 31 3 3.1 Definitions and abbreviations De fi nit ions For the purposes of the present document, the following terms and defiiitions apply. Service Requester: Entity, which uses the Geographical Area Description in any prot

28、ocol to inform the network about a defiied area Target: an entity whose precise geographic position is to be described 3.2 Abbreviations In addition to those mentioned below, abbreviations used in the present document are listed in GSM O 1.04. ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 7 ETSI TS

29、101 109 V7.2.0 (2002-12) For the purposes of the present document, the following abbreviations apply: GAD Geographical Area Description GPS Global Positioning System WGS World Geodetic System 4 Reference system The reference system chosen for the coding of locations is the World Geodetic System 1984

30、, (WGS 84), which is also used by the Global Positioning System, (GPS). The origin of the WGS 84 Co-ordinate system is the geometric centre of the WGS 84 ellipsoid. The ellipsoid is constructed by the rotation of an ellipse around the minor axis which is oriented in the North-South direction. The ro

31、tation axis is the polar axis of the ellipsoid, and the plane orthogonal to it and including the centre of symmetry is the equatorial plane. The relevant dimensions are as follows: Major Axis (a) = 6378137 m Minor Axis (b) = 6356752,3 14 m = 0,0066943800668 a2 - b2 b2 First eccentricity of the ellip

32、soid = Co-ordinates are then expressed in terms of longitude and latitude relevant to this ellipsoid. The range of longitude is -1 80“ to +1 SO“, and the range of latitude is -90“ to +90“. O“ longitude corresponds to the Greenwich Meridian, and positive angles are to the East, while negative angles

33、are to the West. O“ latitude corresponds to the equator, and positive angles are to the North, while negative angles are to the South. Altitudes are defined as the distance between the ellipsoid and the point, along a line orthogonal to the ellipsoid. 5 Shapes The intention is to incorporate a numbe

34、r of different shapes, that can be chosen according to need. - Ellipsoid Point; - - - Polygon; - Ellipsoid point with altitude; - - Ellipsoid Arc. Ellipsoid point with uncertainty circle; Ellipsoid point with uncertainty ellipse; Ellipsoid point with altitude and uncertainty ellipsoid; Each shape is

35、 discussed individually. 5.1 Ellipsoid Point The description of an ellipsoid point is that of a point on the surface of the ellipsoid, and consists of a latitude and a longitude. In practice, such a description can be used to refer to a point on Earths surface, or close to Earths surface, with the s

36、ame longitude and latitude. No provision is made in this version of the standard to give the height of a point. Figure 1 illustrates a point on the surface of the ellipsoid and its Co-ordinates. ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 8 ETSI TS 101 109 V7.2.0 (2002-12) The latitude is the angl

37、e between the equatorial plane and the perpendicular to the plane tangent to the ellipsoid surface at the point. Positive latitudes correspond to the North hemisphere. The longitude is the angle between the half-plane determined by the Greenwich meridian and the half-plane defined by the point and t

38、he polar axis, measured Eastward. 5.2 E The “ellipsoid p( Figure 1: Description of a Point as two co-ordinates lipsoid point with uncertainty circle nt with uncertainty circle“ is characterised by the Co-ordinates of an ellipsoid point (the origin) and a distance r. It describes formally the set of

39、points on the ellipsoid which are at a distance from the origin less than or equal to r, the distance being the geodesic distance over the ellipsoid, i.e., the minimum length of a path staying on the ellipsoid and joining the two points, as shown in figure 2. As for the ellipsoid point, this can be

40、used to indicate points on the Earth surface, or near the Earth surface, of same latitude and longitude. The typical use of this shape is to indicate a point when its position is known only with a limited accuracy. Figure 2: Description of an uncertainty Circle ETSI 3GPP TS 03.32 version 7.2.0 Relea

41、se 1998 9 ETSI TS 101 109 V7.2.0 (2002-12) 5.3 Ellipsoid point with uncertainty ellipse The “ellipsoid point with uncertainty ellipse“ is characterised by the Co-ordinates of an ellipsoid point (the origin), distances rl and r2 and an angle of orientation A. It describes formally the set of points o

42、n the ellipsoid which fall within or on the boundary of an ellipse with semi-major axis of length rl oriented at angle A (O to 1 SO“) measure clockwise from north and semi-minor axis of length r2, the distances being the geodesic distance over the ellipsoid, i.e., the minimum length of a path stayin

43、g on the ellipsoid and joining the two points, as shown in figure 2a. As for the ellipsoid point, this can be used to indicate points on the Earths surface, or near the Earths surface, of same latitude and longitude. The confidence level with which the position of a target entity is included within

44、this set of points is also included with this shape. The typical use of this shape is to indicate a point when its position is known only with a limited accuracy, but the geometrical contributions to uncertainty can be quantified. 5.4 Figure 2a: Description of an uncertainty Ellipse Polygon A polygo

45、n is an arbitrary shape described by an ordered series of points (in the example pictured in the drawing, A to E). The minimum number of points allowed is 3, and the maximum number of points allowed is 15. The points shall be connected in the order that they are given. A connecting line is defied as

46、 the line over the ellipsoid joining the two points and of minimum distance (geodesic). The last point is connected to the first. The list of points must respect a number of conditions: - - a connecting line shall not cross another connecting line; two successive points must not be diametrically opp

47、osed on the ellipsoid. The described area is situated to the right of the lines with the downward direction being toward the Earths centre and the forward direction being from a point to the next. NOTE: This defiition does not permit connecting lines greater than roughly 20 O00 km. If such a need ar

48、ises, the polygon can be described by adding an intermediate point. Computation of geodesic lines is not simple. Approximations leading to a maximum distance between the computed line and the geodesic line of less than 3 metres are acceptable. ETSI 3GPP TS 03.32 version 7.2.0 Release 1998 10 ETSI TS

49、 101 109 V7.2.0 (2002-12) Figure 3: Description of a Polygon 5.5 Ellipsoid Point with Altitude The description of an ellipsoid point with altitude is that of a point at a specified distance above or below a point on the earths surface. This is defined by an ellipsoid point with the given longitude and latitude and the altitude above or below the ellipsoid point. Figure 3a illustrates the altitude aspect of this description. l I- Figure 3a: Description of an Ellipsoid Point with Altitude 5.6 Ellipsoid point with altitude and uncertainty ellipsoid The “ellipsoid point wi