ETSI TS 101 530-2004 Digital cellular telecommunications system (Phase 2+) Location Services (LCS) Base Station System Application Part LCS Extension (BSSAP-LE)《数字蜂窝通信系统(第2+阶段) 定位业.pdf

1、 ETSI TS 101 530 V8.7.1 (2004-05)Technical Specification Digital cellular telecommunications system (Phase 2+);Location Services (LCS);Base Station System Application PartLCS Extension (BSSAP-LE)(3GPP TS 09.31 version 8.7.1 Release 1999)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 101 530 V8

2、.7.1 (2004-05) 1 3GPP TS 09.31 version 8.7.1 Release 1999 Reference RTS/TSGG-020931v871 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sou

3、s-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between s

4、uch versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subj

5、ect to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except

6、as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMa

7、nd the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 101 530 V8.7.1 (2004-05) 2 3GPP TS 09.31 version 8.7.1 Release 1999 Int

8、ellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Ri

9、ghts (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including

10、IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has bee

11、n produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross refere

12、nce between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TS 101 530 V8.7.1 (2004-05) 3 3GPP TS 09.31 version 8.7.1 Release 1999 Contents Intellectual Property Rights2 Foreword.2 Foreword.6 1 Scope 7 2 References 7 3 Definitions, abbreviat

13、ions and symbols .8 4 Definition of BSSAP-LE8 4.1 DTAP-LE Messages.8 4.2 BSSMAP-LE Messages .8 5 Procedures applicable to use of BSSAP-LE.9 5.1 Location Request9 5.1.1 Successful Operation 9 5.1.2 Unsuccessful Operation 10 5.1.3 Abnormal Conditions10 5.1.4 Overload .11 5.2 Connection Oriented Inform

14、ation Transfer 11 5.2.1 Successful Operation 11 5.2.2 Abnormal Conditions12 5.2.3 Segmentation 12 5.3 Connectionless Information Transfer .12 5.3.1 Successful Operation 12 5.3.2 Unsuccessful Operation 12 5.3.3 Abnormal Conditions13 5.3.4 Segmentation 13 5.4 LMU Connection Establishment 13 5.4.1 LMU

15、Connection Establishment initiated by the SMLC 14 5.4.1.1 Successful Operation.14 5.4.1.2 Unsuccessful Operation 14 5.4.1.3 Abnormal Conditions14 5.4.2 LMU Connection Establishment initiated by the MSC 14 5.4.2.1 Successful Operation.14 5.4.2.2 Unsuccessful Operation 15 5.4.2.3 Abnormal Conditions15

16、 5.5 LMU Connection Release 15 5.5.1 LMU Connection Release initiated by the SMLC 15 5.5.1.1 Successful Operation.15 5.5.1.2 Abnormal Conditions15 5.5.2 LMU Connection Release initiated by the MSC.15 5.5.2.1 Successful Operation.15 5.5.2.2 Abnormal Conditions15 5.6 DTAP-LE Information Transfer.16 5.

17、6.1 DTAP-LE Information Transfer Initiated by the SMLC 16 5.6.2 DTAP-LE Information Transfer Initiated by the MSC.16 5.7 Reset.16 5.7.1 Normal Operation .16 5.7.2 Abnormal Conditions16 6 Usage of BSSAP-LE and BSSAP on the Lb Interface.17 6.1 Applicable Message Sets17 6.2 MTP Functions.18 6.3 SCCP Fu

18、nctions .18 6.3.1 General18 6.3.2 Modifications for Connectionless SCCP 18 ETSI ETSI TS 101 530 V8.7.1 (2004-05) 4 3GPP TS 09.31 version 8.7.1 Release 1999 6.3.3 Modifications for Connection Oriented SCCP .18 6.3.4 Contents of the SCCP Data Field19 6.3.5 Abnormal Conditions19 7 Use of BSSAP-LE on th

19、e Ls Interface.20 7.1 Applicable Message Sets20 7.2 MTP Functions.20 7.3 SCCP functions 20 7.3.1 General20 7.3.2 Allowed Exceptions to CCITT Recommendations Q.711-714.20 7.3.3 Allowed Exceptions to ANSI T1.112 .21 7.3.4 Usage of Connectionless SCCP22 7.3.5 Usage of Connection Oriented SCCP .22 7.3.6

20、 Contents of the SCCP Data Field22 7.3.7 Content of DTAP-LE Messages .23 7.3.8 Abnormal Conditions23 8 Use of BSSAP-LE on the Lp Interface.23 8.1 Applicable Message Sets23 8.2 MTP Functions.24 8.3 SCCP functions 24 8.3.1 General24 8.3.2 Allowed Exceptions to CCITT Recommendations Q.711-714.24 8.3.3

21、Allowed Exceptions to ANSI T1.112 .24 8.3.4 Usage of Connectionless SCCP25 8.3.5 Usage of Connection Oriented SCCP .25 8.3.6 Contents of the SCCP Data Field25 9 Message Functional Definitions and Contents.25 9.1 BSSMAP-LE PERFORM LOCATION REQUEST message25 9.1.1 Location Type.26 9.1.2 Cell Identifie

22、r26 9.1.3 Classmark Information Type 3 .26 9.1.4 LCS Client Type .26 9.1.5 Chosen Channel 26 9.1.6 LCS Priority26 9.1.6a LCS QoS.26 9.1.7 GPS Assistance Data 26 9.1.8 BSSLAP APDU26 9.2 BSSMAP-LE PERFORM LOCATION RESPONSE message27 9.2.1 Location Estimate .27 9.2.2 Positioning Data27 9.2.3 Decipherin

23、g Keys .27 9.2.4 LCS Cause 27 9.3 BSSMAP-LE PERFORM LOCATION ABORT message 27 9.3.1 LCS Cause 27 9.4 BSSMAP-LE LMU CONNECTION REQUEST message 28 9.4.1 IMSI28 9.4.2 Sender Address .28 9.4.3 Security.28 9.4.4 Call Number28 9.5 BSSMAP-LE LMU CONNECTION ACCEPT message.28 9.5.1 Security.28 9.5.2 Call Num

24、ber29 9.6 BSSMAP-LE LMU CONNECTION REJECT message29 9.6.1 Reject Cause .29 9.7 BSSMAP-LE LMU CONNECTION RELEASE message 29 9.7.1 Release Cause .29 9.8 BSSMAP-LE CONNECTION ORIENTED INFORMATION message .29 9.8.1 BSSLAP APDU29 9.8.2 Segmentation 30 9.9 BSSMAP-LE CONNECTIONLESS INFORMATION message.30 9

25、.9.1 Source Identity30 ETSI ETSI TS 101 530 V8.7.1 (2004-05) 5 3GPP TS 09.31 version 8.7.1 Release 1999 9.9.2 Destination Identity.30 9.9.3 APDU .30 9.9.4 Segmentation 30 9.9.5 Return Error Request 30 9.9.6 Return Error Cause .30 9.10 BSSMAP-LE RESET message 31 9.11 BSSMAP-LE RESET ACKNOWLEDGE messa

26、ge 31 10 Message format and information element coding 31 10.1 Message type 32 10.2 Information Element Identifiers .32 10.3 APDU.32 10.4 Cause 33 10.5 Cell Identifier .33 10.6 Chosen Channel33 10.7 Classmark Information Type 3.34 10.8 Deciphering Keys.34 10.9 Geographic Location 34 10.10 GPS Assist

27、ance Data 35 10.11 IMSI .36 10.12 ISDN Address 37 10.13 LCS Cause37 10.14 LCS Client Type.38 10.15 LCS Priority .39 10.16 LCS QoS 39 10.17 LMU Cause 40 10.18 Location Type 40 10.19 Network Element Identity 41 10.20 Positioning Data .42 10.21 Return Error Request43 10.22 Return Error Cause.43 10.23 S

28、ecurity 44 10.24 Segmentation44 10.25 Signaling Point Code45 Annex A (informative): Change history .46 History 47 ETSI ETSI TS 101 530 V8.7.1 (2004-05) 6 3GPP TS 09.31 version 8.7.1 Release 1999 Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP).

29、The present document defines the coding of information in an extension of the Base Station System Application Part (BSSAP) that is needed to support location services on interfaces based on use of BSSAP. The contents of the present document are subject to continuing work within the TSG and may chang

30、e following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presen

31、ted to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in t

32、he document. ETSI ETSI TS 101 530 V8.7.1 (2004-05) 7 3GPP TS 09.31 version 8.7.1 Release 1999 1 Scope The present document specifies procedures and information coding that are needed to define and support the BSSAP LCS Extension (BSSAP-LE). The BSSAP-LE message set is applicable to the following GSM

33、 interfaces defined in 3GPP TS 03.71: Lb interface (BSC-SMLC). Ls interface (MSC-SMLC). Lp interface (SMLC-SMLC). The present document defines message formats and encoding for BSSAP-LE and the particular subsets of it that are applicable to each of the above interfaces. The present document also def

34、ines the support for BSSAP-LE message transfer on each of these interfaces using CCITT and ANSI versions of SS7 MTP and SCCP. Additional requirements for the above interfaces that are applicable to BSSAP-LE are also defined e.g. usage of BSSAP (as defined in 3GPP TS 04.08 and 08.08) on the Lb interf

35、ace. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subse

36、quent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 0

37、1.04: “Abbreviations and acronyms“. 1a 3GPP TS 23.032: “Universal Geographical Area Description (GAD)“. 2 3GPP TS 03.71: “Location Services (LCS); (Functional description) - Stage 2“ 3 3GPP TS 04.08: “Mobile radio interface layer 3 specification“. 4 3GPP TS 04.31: “Location Services (LCS); Mobile St

38、ation (MS) Serving Mobile Location Center (SMLC); Radio Resource LCS Protocol (RRLP).“ 5 3GPP TS 04.71: “Mobile radio interface layer 3 Location Services (LCS) specification“. 6 3GPP TS 08.06: “Signaling transport specification mechanism for the Base Station Subsystem Mobile-services Switching Centr

39、e (BSS - MSC) interface“. 7 3GPP TS 08.08: “Mobile-services Switching Centre Base Station System (MSC-BSS) interface; Layer 3 specification“ 8 3GPP TS 08.31: “Location Services (LCS); Serving Mobile Location Center (SMLC) Serving Mobile Location Center (SMLC); SMLC Peer Protocol (SMLCPP).“ 9 3GPP TS

40、 08.71: “Location Services (LCS); Serving Mobile Location Center Base Station Subsystem (SMLC-BSS) interface Layer 3 specification.“ 10 3GPP TS 09.02: “Mobile Application Part (MAP) specification“. 11 CCITT Recommendation Q.702: “Specifications of Signalling System No. 7 - Signalling data link“. ETS

41、I ETSI TS 101 530 V8.7.1 (2004-05) 8 3GPP TS 09.31 version 8.7.1 Release 1999 12 CCITT Recommendation Q.703: “Signalling link“. 13 CCITT Recommendation Q.704: “Signalling network functions and messages“. 14 CCITT Recommendation Q.707: “Specifications of Signalling System No. 7 - Testing and maintena

42、nce“. 15 CCITT Recommendation Q.711: “Functional description of the signalling connection control part“. 16 CCITT Recommendation Q.712: “Definition and function of SCCP messages“. 17 CCITT Recommendation Q.713: “SCCP formats and codes“. 18 CCITT Recommendation Q.714: “Signalling connection control p

43、art procedures“. 19 ANSI T1.111-1996 - Signalling System Number 7 (SS7) Message Transfer Part (MTP) 20 ANSI T1.112-1996 - Signalling System Number 7 (SS7) - Signalling Connection Control Part (SCCP). 21 TIA/EIA/IS-J-STD-036 Enhanced Wireless 9-1-1 Phase II, August 2000. 3 Definitions, abbreviations

44、and symbols Unless listed below, all definitions, symbols and abbreviations used in the present document are listed in 3GPP TS 01.04 and 3GPP TS 03.71. 4 Definition of BSSAP-LE BSSAP-LE is an extension to BSSAP that contains messages and parameters specific to the support of LCS. The following subse

45、ts of BSSAP-LE are defined: DTAP-LE, BSSMAP-LE. 4.1 DTAP-LE Messages DTAP-LE messages are transfered between an SMLC and a Type A LMU and comprise the following individual messages: REGISTER FACILITY RELEASE COMPLETE The content, encoding and certain procedures asssociated with DTAP-LE messages are

46、defined in 3GPP TS 04.71. 4.2 BSSMAP-LE Messages BSSMAP-LE messages are transferred between a BSC, MSC and SMLC and comprise the following individual messages: BSSMAP-LE Positioning Messages Perform Location Request Perform Location Response Perform Location Abort BSSMAP-LE LMU Control Messages ETSI

47、 ETSI TS 101 530 V8.7.1 (2004-05) 9 3GPP TS 09.31 version 8.7.1 Release 1999 LMU Connection Request LMU Connection Accept LMU Connection Reject LMU Connection Release BSSMAP-LE Information Messages Connection Oriented Information Connectionless Information BSSMAP-LE General Messages Reset Reset Ackn

48、owledge The content and encoding of BSSMAP-LE messages are defined in this specification. 5 Procedures applicable to use of BSSAP-LE 5.1 Location Request The Location Request procedure is applicable to the Lb and Ls interfaces. Its purpose is to obtain a location estimate for a target MS that is alr

49、eady in dedicated mode. It is also used to provide an MS with LCS assistance data or with a deciphering key for LCS broadcast assistance data. The initiator of a location request may be either the serving BSC or the visited MSC for the MS. The procedure makes use of SCCP connection oriented signaling on the Lb and Ls interfaces. 5.1.1 Successful Operation The initiator of the location request (VMSC or serving BSC) sends a BSSMAP-LE Perform Location Request to the SMLC associated with the current serving cell for