ETSI TS 101 572-2-2014 Core Network and Interoperability Testing (INT) Conformance tests (3GPP Release 10) Interworking between SIP-I based circuit-switched core network and other _1.pdf

1、 ETSI TS 101 572-2 V1.2.1 (2014-07) Core Network and Interoperability Testing (INT); Conformance tests; (3GPP Release 10); Interworking between SIP-I based circuit-switched core network and other networks; Part 2: SIP-I/SIP NNI Test Suite Structure and Test Purposes (TSS Essential, or potentially Es

2、sential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

3、can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and I

4、nteroperability Testing (INT). The present document is part 2 of a multi-part deliverable covering SIP NNI - SIP-I Interworking described in the clauses 7.2 and 7.3 of TS 129 235 1 (Release 10), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “SIP-I/SIP N

5、NI Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Interworking between SIP-I based circuit-switched core network and other networks (3GPP TS 29.235 version 10.1.0 Release 10) “. 2 ETSI TS 129 163: “Digital cellular telecommunications system (Phase

6、 2+); Universal Mobile Telecommunications System (UMTS); LTE; Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (3GPP TS 29.163 Release 8)“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodo

7、logy and framework - Part 1: General concepts“. 4 Recommendation ITU-T T.38: “Procedures for real-time Group 3 facsimile communication over IP networks“. 5 Void. 6 ETSI TS 101 572-1: “Core Network and Interoperability Testing (INT); Conformance tests according to 3GPPTM29.235 Release 10; Interworkin

8、g between SIP-I based circuit-switched core network and other networks; Part 1: Protocol Implementation Conformance Statement (PICS)“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a

9、 particular subject area. i.1 Recommendation ITU-T E.164: “The international public telecommunication numbering plan“. ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)73 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 129

10、235 1 and the following apply: Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 3. System Under Test (SUT): Refer to ISO/IEC 9646-1 3. Test Purpose (TP): Refer to ISO/IEC 9646-1 3. 3.2 Symbols For the purposes of the present document, the symbols given in TS 129 235 1 apply. 3.3 Abbreviation

11、s For the purposes of the present document, the abbreviations given in TS 129 235 1 and the following apply: ACM Address Complete Message IAM Initial Address MessageIUT Implementation Under Test oBCI optional Backward Call Indicator REL RELease message SUT System Under Test TP Test Purpose 4 Test Su

12、ite Structure (TSS) The Test Suite Structure is in close alignment with TS 129 235 1 and TS 129 163 2. SIP NNI -SIP-I Basic call Sending_of_INVITE (IAM) TP_101_xxx TP_102_xxxP_103_xxxP_104_xxxP_105_xxxTP_106_xxxP_107_xxxSIP-I SIP NNI Basic call Sending_of_INVITE TP_201_xxx TP_202_xxxP_203_xxxP_204_x

13、xxP_205_xxxTP_206_xxxP_207_xxxP_208_xxx P_209_xxxTP_211_xxxETSI ETSI TS 101 572-2 V1.2.1 (2014-07)8PSTN-SS PSTN-SS/COL TP_302_xxx PSTN-SS/MCID TP_303_xxxPSTN-SS/SUB P_304_xxxPSTN-SS/CDIV P_305_xxxPSTN-SS/ECT TP_306_xxxPSTN-SS/HOLD TP_308_xxxPSTN-SS/CCBS P_309_xxxPSTN-SS/CCNR P_310_xxx PSTN-SS/TP P_3

14、11_xxxPSTN-SS/CONF TP_312_xxxPSTN-SS/MLPP P_314_xxxPSTN-SS/GVNS P_315_xxxPSTN-SS/REV P_316_xxxIMS-SS IMS-SS/OIP-OIR TP_401_xxx IMS-SS/TIP-TIR TP_402_xxxIMS-SS/CDIV TP_403_xxxPSTN-SS/CONF P_404_xxxIMS-SS/MCID P_406_xxxIMS-SS/CUG TP_407_xxxIMS-SS/CC/ TP_408_xxxIMS-SS/CW TP_409_xxx 5 Test Purposes (TP)

15、 5.1 Introduction For each requirement in TS 129 163 2 a TP is defined. 5.1.1 TP naming convention TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references are added to identify the actual test suite and whether it applies to the network

16、or the user (see table 5.1.1-1). Table 5.1.1-1: TP identifier naming convention scheme Identifier: TP_ = group 3 digit field representing group reference according to TSS = TP number 3 digit sequential number (001 to 999) 5.1.2 Test strategy As the base standard TS 129 235 1 and TS 129 163 2 contain

17、s no explicit requirements for testing, the TPs were generated as a result of an analysis of the base standard and the PICS specification TS 101 572-1 6. The criteria applied include the following: whether or not a test case can be built from the TP is not considered. 5.1.3 Test purpose structure Th

18、e test purpose structure is according to the test suite structure (TSS). The Reference column in each Test Purpose refers to the basic specification except stated explicitly. ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)96 Test purposes (TP) 6.1 SIP NNI -SIP-I protocol interworking 6.1.1 Signalling Interw

19、orking of a Call from the IP Multimedia Subsystem towards the SIP-I based circuit-switched core network 6.1.1.1 Sending of INVITE (IAM) TP number TP_101_001 Reference 1, clause 7.2.1 2, clause 7.2.3.1.1 TSS reference SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria Test

20、 Purpose name Sending of SIP-INVITE request Test Purpose Ensure that on reception of a SIP-INVITE requesting a session, the I-MGCF sends a SIP-INVITE request with encapsulated IAM message. ISUP Parameter values SIP Parameter values Comments Message flows SIP NNI MGCF SIP-I INVITE barb4right barb4rig

21、ht INVITE (IAM) 100 Trying barb4left barb4left 100 Trying Apply post test routine ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)10TP number TP_101_002 Reference 1, clause 7.2.4 2, clause 7.2.3.1.1 TSS reference SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria PICS 6.1.1/1 AND

22、PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Supported header. The INVITE with encapsulated IAM is immediately sent. The Na

23、ture of connection indicator is set to continuity check performed on a previous circuit or continuity check required. After the UPDATE was received, a UPDATE is sent ISUP Parameter values IAM: Nature of connection indicator = continuity check performed on a previous circuit or continuity check requi

24、redSIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandat

25、ory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos manda

26、tory remote sendrecv Comments Message flows SIP NNI MGCF SIP-I INVITE barb4right barb4right INVITE (IAM) 100 Trying barb4left barb4left 100 Trying 183 Session Progress barb4left barb4left 183 Session Progress PRACK barb4right barb4right PRACK 200 OK (PRACK) barb4left barb4left 200 OK (PRACK) UPDATE

27、barb4right barb4right UPDATE 200 OK (UPDATE) barb4left barb4left 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)11TP number TP_101_003 Reference 1, clause 7.2.4 2, clause 7.2.3.1.1 TSS reference SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection cri

28、teria PICS 6.1.1/1 AND PICS 6.2.1/1 AND NOT PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Supported header. The INVITE with encapsulated IAM

29、is sent after the UPDATE was received. The Nature of connection indicator is set to continuity check is not required. ISUP Parameter values IAM: Nature of connection indicator = continuity check is not required SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=

30、curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:

31、qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows SIP NNI MGCF SIP-I INVITE barb4right 100 Trying

32、barb4left 183 Session Progress barb4left PRACK barb4right 200 OK (PRACK) barb4left UPDATE barb4right barb4right INVITE (IAM) 200 OK (UPDATE) barb4left Apply post test routine ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)12TP number TP_101_006 Reference 1, clause 7.2.4 2, clause 73.3.1.1 TSS reference SIP

33、NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND PICS 6.2.1/2; BICC support Test Purpose name Preconditions support indicated in the Supported header COT procedure supported Test Purpose Ensure that the Preconditions procedure is successful

34、 if the support of Precondition is indicated in the Supported header. The internal ISUP Continuity check procedure is not supported. The INVITE with encapsulated IAM is immediately sent. The Nature of connection indicator is set to COT to be expected. After the UPDATE was received, an UPDATE is sent

35、 ISUP Parameter values IAM: Nature of connection indicator = COT to be expectedSIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local non

36、e a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a

37、=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows SIP NNI MGCF SIP-I INVITE barb4right barb4right INVITE (IAM) 100 Trying barb4left barb4left 100 Trying 183 Session Progress barb4left barb4left 183 Session Progress PRACK barb4righ

38、t barb4right PRACK 200 OK (PRACK) barb4left barb4left 200 OK (PRACK) UPDATE barb4right barb4right UPDATE 200 OK (UPDATE) barb4left barb4left 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)13TP number TP_101_007 Reference 1, clause 7.2.4 2, clause 7.3.3.1.1 TSS referen

39、ce SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND NOT PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondi

40、tion is indicated in the Supported header. The INVITE with encapsulated IAM) is sent after the UPDATE was received. The Nature of connection indicator is set to no COT to be expected. ISUP Parameter values IAM: Nature of connection indicator = no COT to be expected SIP Parameter values INVITE: Suppo

41、rted: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote

42、 sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message

43、 flows SIP NNI MGCF SIP-I INVITE barb4right 100 Trying barb4left 183 Session Progress barb4left PRACK barb4right 200 OK (PRACK) barb4left UPDATE barb4right barb4right INVITE (IAM) 200 OK (UPDATE) barb4left Apply post test routine ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)14TP number TP_101_007A Referen

44、ce 1, clause 7.2.4 2, clause 7.3.3.1.1 TSS reference SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions fulfilled indicated in the INVITE request Test Purpose Ensure that Preconditions are fulfilled is indicate

45、d in the SDP received in the INVITE request. The INVITE with encapsulated IAM) is sent. The Nature of connection indicator is set to no COT to be expected. ISUP Parameter values IAM: Nature of connection indicator = continuity check is not required or IAM: Nature of connection indicator = no COT to

46、be expected SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 180 SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos ma

47、ndatory remote sendrecv Comments Message flows SIP NNI MGCF SIP-I INVITE barb4right barb4right INVITE (IAM) 180 Ringing barb4left barb4left 180 Ringing (ACM) PRACK barb4right barb4right PRACK 200 OK (PRACK) barb4left barb4left 200 OK (PRACK) Apply post test routine TP number TP_101_010 Reference 1,

48、clause 7.2.1 2, clause 7.2.3.1.1 TSS reference SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria Test Purpose name Unsupported media type is rejected 488 is sent Test Purpose Ensure that an unsupported media type is rejected a 488 Not Acceptable Here final response is se

49、nt to the calling user. ISUP Parameter values SIP Parameter values INVITE: SDP: m= video 4713 RTP/AVP 31 Comments Message flows SIP NNI MGCF SIP-I INVITE barb4right 488 Not Acceptable Here barb4left ACK barb4right ETSI ETSI TS 101 572-2 V1.2.1 (2014-07)15TP number TP_101_011 Reference 1, clause 7.2.1 2, clause 7.2.3.1.1 TSS reference SIP NNI - SIP-I/Basic call/Sending_of_ SIP-INVITE request / Selection criteria Test Purpose name Unsupported media type is rejected session successful Te