ETSI TS 101 596-1-2018 Core Network and Interoperability Testing (INT) Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) using IP Multima.pdf

1、 ETSI TS 101 596-1 V6.1.1 (2018-01) Core Network and Interoperability Testing (INT); Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test Specification; (3GPPTMRelease 12); Part 1: Protoc

2、ol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 101 596-1 V6.1.1 (2018-01)2 Reference RTS/INT-00141-1 Keywords conformance, IMS, PICS, testing, TIP, TIR ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47

3、 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in p

4、rint. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the

5、 Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/

6、portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, elect

7、ronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. Al

8、l rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its M

9、embers. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 101 596-1 V6.1.1 (2018-01)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative

10、 references 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 6g33.3 Abbreviations . 6g34 Conformance to this PICS pro forma specification 6g34.0 The right to copy 6g34.1 Guidance for completing the PICS pro forma 7g34.1.0 Introduction. 7g34.1.1 Purposes and structure 7

11、g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 8g34.2 Introduction 9g34.2.0 Identification of the implementation . 9g34.2.1 Date of the statement 9g34.2.2 Implementation Under Test (IUT) identification 9g34.2.3 System Under Test (SUT) identification

12、 9g34.2.4 Product supplier 9g34.2.5 Client (if different from product supplier) 10g34.2.6 PICS contact person 10g34.3 Identification of the ETSI TS 124 608 . 11g34.3.0 Introduction. 11g34.4 Global statement of conformance . 11g34.5 Roles . 11g34.6 User role . 11g34.6.0 Introduction. 11g34.6.1 Major

13、capabilities . 12g34.7 Network role . 12g34.7.0 Introduction. 12g34.7.1 Major capabilities . 12g3History 14g3ETSI ETSI TS 101 596-1 V6.1.1 (2018-01)4 Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The inf

14、ormation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from th

15、e ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or t

16、he updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicat

17、ed as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical S

18、pecification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) using IP Multimedia

19、(IM) Core Network (CN) subsystem; Conformance Test Specification, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Terminating Identification Presentation

20、(TIP) and Terminating Identification Restriction (TIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.608 Release 12) defined in ETSI TS 124 608 1 in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 964

21、6-7 4 and ETSI ETS 300 406 2. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of

22、the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI ca

23、nnot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 124 608 (V12.0.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Terminating Identificati

24、on Presentation (TIP) and Terminating Identification Restriction (TIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.608 version 12.0.0 Release 12)“. 2 ETSI ETS 300 406 (04-1995): “Methods for testing and Specification (MTS); Protocol and profile conformanc

25、e testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing

26、 methodology and framework - Part 7: Implementation Conformance Statements“. 5 ETSI TS 124 604: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Communication Diversion (CDIV) using IP Multimedia (IM) Core Network (CN) subsystem; P

27、rotocol specification (3GPP TS 24.604)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of

28、the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but t

29、hey assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 101 596-1 V6.1.1 (2018-01)6 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 608 1, ISO/IEC 9646-1 3, ISO/IEC 96

30、46-7 4 and the following apply: ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specifi

31、cation, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may co

32、ntain additional information. 3.2 Symbols For the purposes of the present document, the symbols given in ETSI TS 124 608 1 apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 608 1 and the following apply: CN Core Network ICS Implementation Confo

33、rmance Statement IM IP Multimedia IP Internet ProtocolIUT Implementation Under Test PDU Protocol Data Unit PICS Protocol ICS SCS System Conformitation Statement SUT System Under Test TIP Terminating Identification Presentation TIR Terminating Identification Restriction UMTS Universal Mobile Telecomm

34、unications System URI Universal Resource Identifier 4 Conformance to this PICS pro forma specification 4.0 The right to copy Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the ICS

35、 proforma in this clause so that it can be used for its intended purposes and may further publish the completed ICS. ETSI ETSI TS 101 596-1 V6.1.1 (2018-01)7 4.1 Guidance for completing the PICS pro forma 4.1.0 Introduction If it claims to conform to the present document, the actual PICS pro forma t

36、o be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance wi

37、th the guidance for completion given in clause 4.1. 4.1.1 Purposes and structure The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 608 1 may provide information about the implementation in a standardized ma

38、nner. The PICS pro forma is subdivided into clauses for the following categories of information: guidance for completing the PICS pro forma; identification of the implementation; identification of the ETSI TS 124 608 1; global statement of conformance; roles; user role: - major capabilities; network

39、 role: - major capabilities. 4.1.2 Abbreviations and conventions The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table

40、. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is the requirement or option supported by the implementation?“ ETSI ETSI TS 101 596-1 V6.1.1 (2018-01)8 Status column The following notations, defin

41、ed in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported; o optional - the capability may be supported or not; n/a not applicable - in the given context, it is impossible to use the capability; o.i qualified optional - for mutually exclusive or

42、 selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table; ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other o

43、ptional or conditional items. “i“ is an integer identifying a unique conditional status expression which is defined immediately following the table. Reference column The reference column makes reference to ETSI TS 124 608 1, except where explicitly stated otherwise. Support column: The support colum

44、n shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation; N or n not supported by the implementation; N/A, n/a or - no answer required (allowed only if the status i

45、s n/a, directly or after evaluation of a conditional status). If this PICS pro forma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier

46、 shall enter the unique reference to a conditional expression, preceded by “?“ (e.g.?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and

47、 only if that profile is to be used. EXAMPLE: ?3: IF prof1 THEN Y ELSE N. NOTE: As stated in ISO/IEC 9646-7 4, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for

48、 a parameter on a PDU means that the semantics of that parameter are supported. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate

49、is FALSE. 4.1.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support boxes provided, using the notation described in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary,