ETSI TS 102 012-2001 Digital Enhanced Cordless Telecommunications (DECT) DECT Packet Radio Service (DPRS) Application Specific Access Profile (ASAP) V 24 Interworking Profile Test _1.pdf

1、ETSI TS 102 O12 1.1.1 (2001-11) Technical Specificafion Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking; Profile Test Specification (PTS) 2 ETSI TS 102 012 V1.l.l (2001-11) Reference DTS/DECT-040183

2、Keywords data, DECT, DPRS, interoperability, PTS, TCL, testing ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88

3、 Important notice Individual copies of the present document can be downloaded from: http:l/w.etsi .orq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version

4、is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status.

5、 Information on the current status of this and other ETSI documents is available at 3 If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend t

6、o reproduction in all media. O European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3 ETSI TS 102 012 V1.l.l (2001-11) Contents Intellectual Property Rights 5 Foreword . 5 1 Scope 6 2 References 6 3 Definitions and abbreviations . 7 Definitions . . 7 3.1 Abbreviations . 7

7、3.2 4 V.24 access ASAP 8 4.1 Test architecture . 8 4.2 Test configurations . 8 4.3 Test mode . 8 4.4 Relevant te st cases . . 8 4.4.1 Test cases condition . 8 4.4.2 Test cases contents . 9 4.4.3 Application behavio 4.4.4 4.4.5 4.4.7 Management entity pr es 4.5 Additional test cases or procedures . A

8、nnex A (normative): A . 1 Identification summary . 12 A.2 Test summary . 12 . . 4.4.6 MAC layer procedure Profile Implementation extra Information for Testing (IXIT) proforma . 12 A.3 Test laboratory 12 A.4 Client identification 13 Protocol layer information 13 A.5 SUT 13 A.6 A.6.1 Protocol identifi

9、cation . . 13 A.6.2 IUT information . 14 Annex B (normative): Profile Conformance Test Report (Profile CTR) proforma 17 B . 1 Identification summary . 17 B . 1.1 Protocol conformance test report . 17 B . 1.2 IUT identification . 17 B . 1.3 Testing environment . 18 B.1.4 Limits and reservation . . 18

10、 . . 18 B . 1.5 Comments . B.2 IUT conformance status . 18 B.3 B.4 B.5 B.6 B.7 Observations . 20 Static conformance summary . 19 Static conformance review report . 19 Test campaign report 20 Dynamic conformance summary 19 ETSI 4 ETSI TS 102 012 V1.l.l (2001-11) Annex C (normative): System Conformanc

11、e Test Report (SCTR) proforma 21 c. 1 c.1.1 c. 1.2 C. 1.3 C. 1.4 C.1.5 C.1.6 C. 1.7 C.1.8 C.1.9 Identification summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12、 . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1 System conformance test report Client identificati Profile identificat Limits and reservations . .23 Record of agreement 23 Comments .23 C.2 System report summary 24 C.2.1 Profile testing summary . . . . . . . . . . . . . . . . . . . . . .

13、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 c.2.1.1 Physical Layer . . 24 c.2.1.2 MAC layer . . 25 C.2.1.3 DLC layer . 26 C.2.

14、1.4 NWK layer 27 Annex D (normative): System Conformance Statement 07.24) proforma 28 D. 1 D.l.l D. 1.2 D. 1.3 D. 1.4 D.1.5 D.1.6 D. 1.7 Identification summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 SCS identificat 28 IUT identificat 28 Client identificati 29 Supplier identificati 29 Manufacturer identi 30 Protocols identificatio 30 Profile identification 30 D.2 Miscellaneous system informati

16、on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1 D.2.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1 D.2.2 Other information . 3 1 History . . . .32 ETSI 5 ETSI TS 102 012 V1.l.

18、l (2001-11) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellect

19、ual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has be

20、en carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI

21、Project Digital Enhanced Cordless Telecommunications (DECT). ETSI 6 ETSI TS 102 012 V1.l.l (2001-11) 1 Scope The present document contains the test specification for DECT Packet Radio Services (DPRS), V.24 ASAP. The objective of this test specification is to provide a basis to test DECT equipments g

22、iving a high probability of inter-operability between different manufacturers DECT equipment. The IS0 standard for the methodology of conformance testing (ISO/IEC 9646-1 16 and ISO/IEC 9646-2 17 as well as the ETSI rules for conformance testing (ETS 300 406 15) are used as a basis for the test metho

23、dology. Annex A provides the Profile Implementation extra Information for Testing (IXIT) proforma. Annex B provides the Profile Conformance Test Report (Profile CTR) proforma. Annex C provides the System Conformance Test Report (SCTR) proforma. Annex D provides the System Conformance Statement (SCS)

24、 proforma. 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific refere

25、nce, subsequent revisions do not apply. For a non-specific reference, the latest version applies. il ETSI EN 300 175-1 : “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1 : Overview“. ETSI EN 300 175-2: “Digital Enhanced Cordless Telecommunications (DECT); Common In

26、terface (CI); Part 2: Physical Layer (PHL)“. ETSI EN 300 175-3 : “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link

27、Control (DLC) layer“. ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. ETSI EN 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing“. ETSI EN 300 175-7: “

28、Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. ETSI EN 300 175-8: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission“. ETSI EN 300 444: “Digital Enhanced Cordless Telecommunicati

29、ons (DECT); Generic Access Profile (GAP)“. ETSI TS 101 947: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking“. ETSI EN 30 1 649: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radi

30、o Services (DPRS)“. 21 31 41 51 61 71 SI 91 lo1 111 ETSI 7 ETSI TS 102 012 V1.l.l (2001-11) ETSI TS 101 950: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Interoperability Test Specification“. ETSI TS 102 O1 1-1: “Digital Enhanced Cordless Telecommunications

31、 (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking; Profile Implementation Conformance Statement (ICs); Part 1 : Portable radio Termination (PT)“. ETSI TS 102 O1 1-2: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service

32、 (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking; Profile Implementation Conformance Statement (ICs); Part 2: Fixed radio Termination (FT)“. ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization

33、methodology“. ISO/IEC 9646- 1 (1 99 1): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 1 : General concepts“. ISO/IEC 9646-2 (1 99 1): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Par

34、t 2: Abstract Test Suite Specification“. ISO/IEC 9646-3 (1 99 1): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 3: The Tree and Tabular Combined Notation (TTCN)“. ISO/IEC 9646-5 (1 99 1): “Information technology; Open Systems Interconnecti

35、on; Conformance testing methodology and framework; Part 5: Requirements on test laboratories and clients for the conformance assessment process“. ISO/IEC 9646-6 (1 99 1): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 6: Protocol profile te

36、st specification“. ISO/IEC 9646-7 (1 99 1): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 7: Implementation Conformance Statement“. 3 3.1 Definitions and abbreviations De fi nit ions For the purposes of the present document, the terms and

37、definitions given in ISO/IEC 9646-7 21 and in TS 101 950 12 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations defiied in ISO/IEC 9646-1 16, ISO/IEC 9646-6 20, ISO/IEC 9646-7 21, and in TS 101 950 12, and the following apply: CF CS DECT DLC DPRS FT GAP GF IUT MAC NW

38、K os1 PCTR PHL higher layer signalling Channel (Fast) higher layer signalling Channel (Slow) Digital Enhanced Cordless Telecommunications Data Link Control DECT Packet Radio Service Fixed radio Termination Generic Access Profile higher layer information control channel - a logical channel to the MAC

39、 layer Implementation Under Test Medium Access Control NetWorK Operating System Identification Protocol Conformance Test Report PHysical Layer ETSI 8 ETSI TS 102 012 V1.l.l (2001-11) PICS Protocol Implementation Conformance Statement PSTS Profile Specific Test Specification PT Portable radio Termina

40、tion SAP Service Access Point SCS System Conformance Statement SUT System Under Test U-plane User-plane 4 4.1 V.24 access ASAP Test architecture The test architecture for DPRS interoperability testing is defined in TS 101 950 12, clause 4.1, and is relevant for this profile. 4.2 Test con f i g u rat

41、 ions The test configurations for DPRS interoperability testing are defined in TS 101 950 12, clause 4.2, and is relevant for this profile. 4.3 Test mode The test mode for DPRS interoperability testing is defined in TS 101 950 12, clause 4.3, and is relevant for this profile. 4.4 Relevant test cases

42、 4.4.1 Test cases condition The test case list in table 1 identifies all possible test cases for testing, as defined in TS 101 950 12, clause 6. A status is assigned to each test case in order to indicate these test cases, which are mandatory to execute. Table 1: Test Case condition ETSI 9 Nr. o1 02

43、 03 ETSI TS 102 012 V1.l.l (2001-11) APP. NWK Procedure DLC Procedure MAC Procedure Mgt. behaviour Procedure o1 01, 03, 04, 05, 06, 08, 02, 03, 08, 09, IO, 11 01, 02, 03, 05, 07, 13, 14, - 09,20 15 02 IO, 12, 17, 19 02, 03, 04, 05, 06, 07, 08, - 13, 14, 15 02 02, IO, 13, 14, 19 02, 03, 04, 05, 06, 0

44、7, 08, - 4.4.2 Test cases contents 04 05 06 09, 13, 14, 15 03 05, 08, O9 04 07, 11 05 15 02, 03, 04, 05, 06, 08, 15, O1 4.4.3 Application behaviour Table 3: Application behaviour ETSI 10 N r. O1 02 03 04 05 06 07 08 O9 10 11 ETSI TS 102 012 V1.l.l (2001-11) DLC layer procedures U-plane transmission

45、class 2 Class A link establishment Class A acknowledged information transfer FU1 Oa frame operation FUlOb frame operation FU1 Oc frame operation Class A connection handover CS-channel fragmentation and recombination CF-channel fragmentation and recombination Selection of logical channels (CS and CF)

46、 Class A link release 4.4.4 NWK layer procedures Table 4: NWK layer procedures 4.4.5 DLC layer procedures ETSI 11 Nr. O1 02 03 04 05 06 07 08 ETSI TS 102 012 V1.l.l (2001-11) MAC layer procedures Downlink broadcast Logical connection setup Single bearer Physical connection setup Multi bearer Physica

47、l connection setup Single duplex bearer setup Double simplex bearer setup CS/CF Channel Data Connection modification 4.4.6 MAC layer procedures 1 O 11 12 13 14 15 16 17 Bearer replacement Encryption process - initialization and synchronization Encryption mode control Logical connection release Physi

48、cal connection release Unacknowledged bearer release Fast bearer release GF Channel Data Nr. O1 02 03 4.4.7 Management entity procedures Management entity procedures Dynamic bandwidth management Suspend management Resume management Table 7: Management entity procedures 4.5 Additional test cases or p

49、rocedures Neither additional test cases nor procedures are provided for the purpose of this profile. ETSI 12 ETSI TS 102 012 V1.l.l (2001-11) Annex A (normative): Profile Implementation extra Information for Testing (IXIT) proforma Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants tha