ETSI TS 102 027-1-2006 Methods for Testing and Specification (MTS) Conformance Test Specification for SIP (IETF RFC 3261) Part 1 Protocol Implementation Conformance Statement (PICS_1.pdf

1、 ETSI TS 102 027-1 V4.1.1 (2006-07)Technical Specification Methods for Testing and Specification (MTS);Conformance Test Specification for SIP (IETF RFC 3261);Part 1: Protocol Implementation ConformanceStatement (PICS) proformaETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 2 Reference RTS/MTS-00097-12 Keywo

2、rds IP, PICS, SIP, telephony, testing, VoIP ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Ind

3、ividual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Docum

4、ent Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the c

5、urrent status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be repro

6、duced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Membe

7、rs. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 3 Contents Intellectual Propert

8、y Rights7 Foreword.7 Introduction 7 1 Scope 8 2 References 8 3 Definitions and abbreviations.9 3.1 Definitions9 3.2 Abbreviations .9 4 Conformance requirement9 5 Guidance for completing the PICS proforma.10 5.1 Purposes and structure10 5.2 Abbreviations and conventions 10 Annex A (normative): PICS P

9、roforma for RFC 3261 12 A.1 Instructions for completing the PICS proforma .12 A.2 Identification of the implementation 12 A.2.1 Date of the statement12 A.2.2 Implementation Under Test (IUT) identification .12 A.2.3 System Under Test (SUT) identification12 A.2.4 Product supplier13 A.2.5 Client (if di

10、fferent from product supplier)13 A.2.6 PICS contact person .14 A.3 Identification of the protocol14 A.4 Global statement of conformance.14 A.5 General .15 A.5.1 Logical SIP entities 15 A.6 User Agent15 A.6.1 Services 15 A.6.2 Registration service 15 A.6.2.1 Registration procedures 16 A.6.2.2 Registr

11、ation Messages 16 A.6.2.2.1 Registration Request .16 A.6.2.2.2 Registration Responses .17 A.6.2.2.3 REGISTER parameters .18 A.6.2.2.3.1 REGISTER request parameters .18 A.6.2.2.3.2 REGISTER response parameters.19 A.6.2.3 Registration Security.20 A.6.2.3.1 Registration Security capabilities20 A.6.2.3.

12、2 HTTP parameters 20 A.6.2.4 Registration Transport 21 A.6.2.5 Registration Addressing21 A.6.2.5.1 URIs 21 A.6.2.5.2 IP address 21 A.6.2.6 Registration Timers.22 A.6.3 Call Control service22 A.6.3.1 Call Control procedures22 A.6.3.2 Call Control Messages 23 A.6.3.2.1 Call Control Requests .23 A.6.3.

13、2.2 Call Control Responses .23 ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 4 A.6.3.2.2.1 Call Control INVITE Responses .23 A.6.3.2.2.2 Call Control re-INVITE Responses.24 A.6.3.2.2.3 Call Control BYE Responses 25 A.6.3.2.2.4 Call Control CANCEL Responses 26 A.6.3.2.3 INVITE parameters.27 A.6.3.2.3.1 INV

14、ITE request parameters.27 A.6.3.2.3.2 INVITE response parameters 28 A.6.3.2.4 re-INVITE parameters 29 A.6.3.2.4.1 re-INVITE request parameters 29 A.6.3.2.4.2 re-INVITE response parameters30 A.6.3.2.5 ACK 32 A.6.3.2.5.1 ACK request parameters32 A.6.3.2.6 BYE parameters 32 A.6.3.2.6.1 BYE request para

15、meters 32 A.6.3.2.6.2 BYE response parameters33 A.6.3.2.7 CANCEL parameters 34 A.6.3.2.7.1 CANCEL request parameters 34 A.6.3.2.7.2 CANCEL response parameters35 A.6.3.3 Call Control Security 36 A.6.3.3.1 Call Control Security capabilities .36 A.6.3.3.2 HTTP parameters 36 A.6.3.4 Call Control Transpo

16、rt37 A.6.3.5 Call Control Addressing .37 A.6.3.5.1 URIs 37 A.6.3.5.2 IP address 37 A.6.3.6 Call Control Timers 37 A.6.3.7 Call Control SDP description38 A.6.3.7.1 SDP types38 A.6.3.7.2 SDP types parameters .39 A.6.4 Querying for capabilities 41 A.6.4.1 Querying for capabilities 41 A.6.4.2 Querying f

17、or capabilities Messages 41 A.6.4.2.1 Querying for capabilities Requests .41 A.6.4.2.2 Querying for capabilities Responses .41 A.6.4.2.2.1 Querying for capabilities OPTIONS Responses41 A.6.4.2.3 OPTIONS parameters .42 A.6.4.2.3.1 OPTIONS request parameters .42 A.6.4.2.3.2 OPTIONS response parameters

18、.43 A.6.4.3 Querying for capabilities Security 44 A.6.4.3.1 Querying for capabilities Security capabilities44 A.6.4.3.2 HTTP parameters 45 A.6.4.4 Querying for capabilities transport .45 A.6.4.5 Querying for capabilities Addressing .46 A.6.4.5.1 URIs 46 A.6.4.5.2 IP address 46 A.6.4.6 Querying for c

19、apabilities Timers 46 A.7 Registrar .46 A.7.1 Services 46 A.7.2 Registration service 47 A.7.2.1 Registration procedures 47 A.7.2.2 Registration Messages 47 A.7.2.2.1 Registration Requests47 A.7.2.2.2 Registration Responses .47 A.7.2.2.3 REGISTER parameters .48 A.7.2.2.3.1 REGISTER request parameters

20、 .48 A.7.2.2.3.2 REGISTER response parameters.49 A.7.2.3 Registration Security.50 A.7.2.3.1 Registration Security capabilities50 A.7.2.3.2 HTTP parameters 50 A.7.2.4 Registration Transport 51 A.7.2.5 Registration Addressing51 ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 5 A.7.2.5.1 URIs 51 A.7.2.5.2 IP a

21、ddress 51 A.7.2.6 Registration Timers.51 A.8 Proxy 52 A.8.1 Services 52 A.8.2 Call Control service52 A.8.2.1 Call Control procedures52 A.8.2.2 Call Control Messages 53 A.8.2.2.1 Call Control Requests .53 A.8.2.2.2 Call Control Responses .53 A.8.2.2.2.1 Call Control INVITE Responses .53 A.8.2.2.2.2 C

22、all Control re-INVITE Responses.54 A.8.2.2.2.3 Call Control BYE Responses 55 A.8.2.2.2.4 Call Control CANCEL Responses 56 A.8.2.2.3 INVITE parameters.57 A.8.2.2.3.1 INVITE request parameters.57 A.8.2.2.3.2 INVITE response parameters 58 A.8.2.2.4 re-INVITE parameters 59 A.8.2.2.4.1 re-INVITE request

23、parameters 59 A.8.2.2.4.2 re-INVITE response parameters60 A.8.2.2.5 ACK 61 A.8.2.2.5.1 ACK request parameters61 A.8.2.2.6 BYE parameters 62 A.8.2.2.6.1 BYE request parameters 62 A.8.2.2.6.2 BYE response parameters63 A.8.2.2.7 CANCEL parameters 64 A.8.2.2.7.1 CANCEL request parameters 64 A.8.2.2.7.2

24、CANCEL response parameters65 A.8.2.3 Call Control Security 66 A.8.2.3.1 Call Control Security capabilities .66 A.8.2.3.2 HTTP parameters 66 A.8.2.4 Call Control Transport67 A.8.2.5 Call Control Addressing .67 A.8.2.5.1 URIs 67 A.8.2.5.2 IP address 67 A.8.2.6 Call Control Timers 67 A.8.3 Querying for

25、 capabilities 68 A.8.3.1 Querying for capabilities 68 A.8.3.2 Querying for capabilities Messages 68 A.8.3.2.1 Querying for capabilities Requests .68 A.8.3.2.2 Querying for capabilities Responses .68 A.8.3.2.2.1 Querying for capabilities OPTIONS Responses68 A.8.3.2.3 OPTIONS parameters .69 A.8.3.2.3.

26、1 OPTIONS request parameters .69 A.8.3.2.3.2 OPTIONS response parameters.70 A.8.3.3 Querying for capabilities Security 71 A.8.3.3.1 Querying for capabilities Security capabilities71 A.8.3.3.2 HTTP parameters 72 A.8.3.4 Querying for capabilities transport .72 A.8.3.5 Querying for capabilities address

27、ing.73 A.8.3.5.1 URIs 73 A.8.3.5.2 IP address 73 A.8.3.6 Querying for capabilities Timers 73 A.9 Redirect server73 A.9.1 Services 73 A.9.2 Redirection service.74 A.9.2.1 Redirection Messages .74 A.9.2.1.1 Redirection Requests.74 A.9.2.1.2 Redirection Responses 74 A.9.2.1.2.1 Redirection INVITE Respo

28、nses 74 ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 6 A.9.2.1.2.2 Redirection BYE Responses75 A.9.2.1.2.3 Redirection CANCEL Responses76 A.9.2.1.2.4 Redirection OPTIONS Responses.76 A.9.2.1.3 Redirection parameters77 A.9.2.1.3.1 Request parameters77 A.9.2.1.3.2 Response parameters .78 A.9.2.2 Redirectio

29、n Security .78 A9.2.2.1 Redirection Security capabilities.78 A.9.2.2.2 HTTP parameters 78 A.9.2.3 Redirection Transport .79 A.9.2.4 Redirection Addressing.79 A.9.2.4.1 URIs 79 A.9.2.4.2 IP address 79 A.9.2.5 Redirection Timers .80 Annex B (informative): Bibliography.81 History 82 ETSI ETSI TS 102 02

30、7-1 V4.1.1 (2006-07) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314:

31、 “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no

32、 investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Speci

33、fication (TS) has been produced by ETSI Technical Committee Methods for Testing and Specification (MTS). The present document is part 1 of a multi-part deliverable covering Conformance Test Specification for SIP (IETF RFC 3261), as identified below: Part 1: “Protocol Implementation Conformance State

34、ment (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma“. Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement

35、 of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called an Implementation Conformance Statement (ICS). ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 8 1 Scope The present document provides the Protocol Implementation Conformance Statement

36、(PICS) proforma for the Session Initiation Protocol (SIP) implementation in compliance with the relevant requirements specified in RFC 3261 “SIP: Session Initiation Protocol“ 1, and in accordance with the relevant guidance given in ISO/IEC 9646-7 7 and ETS 300 406 5. The present document is applicab

37、le to equipment performing the roles of user Agent, Registration server, proxy Application Server and Redirect server. The present document is a new release of TS 102 027-1. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the pr

38、esent document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found

39、to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 IETF RFC 3261: “SIP: Session Initiation Protocol“. 2 IETF RFC 2327: “SDP: Session Description Protocol“. 3 IETF RFC 2617: “HTTP Authentication: Basic and Digest Access Authentication“. 4 IETF RFC 3

40、264: “An Offer/Answer Model with Session Description Protocol (SDP)“. 5 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 6 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Co

41、nformance testing methodology and framework - Part 1: General concepts“. 7 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 3 Definitions and abbreviations 3.1 Definitions For the

42、purposes of the present document, the terms and definitions given in RFC 3261 1, ISO/IEC 9646-1 6, ISO/IEC 9646-7 7 and the following apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating

43、which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 9 ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or

44、 system becomes an ICS Protocol ICS (PICS): PICS for an implementation or system claimed to conform to a given protocol specification 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: HTTP HyperText Transfer Protocol ICS Implementation Conformance Stateme

45、nt IP Internet ProtocolIUT Implementation Under Test PICS Protocol ICS PIXIT partial Protocol Implementation eXtra Information for Testing SDP Session Description Protocol SIP Session Initiation Protocol SUT System Under Test UA User Agent UAC User Agent Client UAS User Agent Server URI Uniform Reso

46、urce Identifier 4 Conformance requirement The supplier of a protocol implementation, which is claimed to conform to the requirements of RFC 3261 1, shall verify that his protocol implementation meets the requirements described in the present document. All the requirements described in RFC 3261 1 app

47、ly. An ICS, which conforms to the present document, shall be a conforming ICS proforma completed in accordance with the guidance for completion given in clause 5. 5 Guidance for completing the PICS proforma 5.1 Purposes and structure The purpose of this ICS proforma is to provide a mechanism whereby

48、 a supplier of an implementation of the requirements defined in the Session Initiation Protocol RFC 3261 1 document provides information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: Instructions for compl

49、eting the PICS proforma; Identification of the implementation; Identification of the protocol; and Global statement of conformance. 5.2 Abbreviations and conventions The ICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 7. ETSI ETSI TS 102 027-1 V4.1.1 (2006-07) 10Item column The item column contains a number, which identifies the item in the table. Item description column The item description column describes in free text each respectiv