ETSI TS 102 371-2016 Digital Audio Broadcasting (DAB) Digital Radio Mondiale (DRM) Transportation and Binary Encoding Specification for Service and Programme Information (SPI) (V3 _1.pdf

1、 ETSI TS 102 371 V3.2.1 (2016-05) Digital Audio Broadcasting (DAB); Digital Radio Mondiale (DRM); Transportation and Binary Encoding Specification for Service and Programme Information (SPI) TECHNICAL SPECIFICATION ETSI ETSI TS 102 371 V3.2.1 (2016-05)2 Reference RTS/JTC-DAB-77 Keywords audio, broad

2、casting, DAB, digital, DRM, EPG ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present doc

3、ument can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In c

4、ase of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docu

5、ment may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/p

6、ortal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be mod

7、ified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. European Broadcasting Union 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks

8、of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 371 V3.2.1 (2016-05)3 Conten

9、ts Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 9g34 Encoding . 10g34.0 Introduction 10g34.1

10、Syntax specification . 10g34.2 Binary objects . 10g34.3 Elements . 11g34.3.0 General 11g34.3.1 Top-level elements 11g34.4 Attributes 12g34.4.0 General 12g34.4.1 Default attributes 12g34.5 CDATA and strings 13g34.5.0 General 13g34.5.1 Character encoding . 13g34.6 Enumerated data values 13g34.7 Common

11、 data types 13g34.7.0 Introduction. 13g34.7.1 CRID type . 13g34.7.2 Short CRID type . 14g34.7.3 MIME type 14g34.7.4 timePoint type . 14g34.7.5 Duration type 15g34.7.6 bearerURI type 15g34.7.6.0 General 15g34.7.6.1 dab: domain . 15g34.7.6.2 drm: domain 16g34.7.6.3 http: domain 16g34.7.7 georss:double

12、List type 16g34.8 Miscellaneous fields . 16g34.8.1 xml:lang 16g34.8.2 index . 16g34.8.3 version 16g34.8.4 numOfItems 16g34.8.5 width and height . 16g34.9 Token table element . 17g34.9.0 General 17g34.9.1 Tokens 17g34.10 Void 17g34.11 Default language 18g34.12 Genre element 18g34.13 location element

13、. 19g34.14 onDemand element . 19g34.15 bearer element 19g34.16 serviceScope element . 19g3ETSI ETSI TS 102 371 V3.2.1 (2016-05)4 4.17 serviceInformation element 19g34.17.0 Introduction. 19g34.17.1 DAB ensemble element encoding . 20g34.18 Unencoded elements. 20g35 Profiling 20g35.1 Profiles . 20g35.1

14、.0 Introduction. 20g35.1.1 Basic profile 20g35.1.2 Advanced profile 21g35.2 Fragmentation of the profile data into objects 21g35.2.0 Introduction. 21g35.2.1 Service Information (SI) . 21g35.2.2 Programme Information (PI). 21g35.2.3 Group Information (GI) 21g35.3 Scheme to combine the profile data .

15、22g35.4 Attributes required for merging 22g35.4.0 Introduction. 22g35.4.1 Service Information 22g35.4.2 Programme Information 22g35.4.3 Group Information 22g36 Transportation 23g36.1 Transport mechanism . 23g36.2 Maximum object size . 23g36.3 Maximum channel size . 23g36.4 MOT parameters 23g36.4.0 G

16、eneral 23g36.4.1 MOT header core 24g36.4.2 ProfileSubset . 24g36.4.3 ContentName 24g36.4.4 CompressionType . 25g36.4.5 CAInfo 25g36.4.6 ScopeStart . 25g36.4.7 ScopeEnd 25g36.4.8 ScopeID 25g36.5 Transportation of other objects . 26g37 Signalling . 26g37.1 DAB . 26g37.1.1 FIG 0/13 (application type) s

17、ignalling 26g37.1.2 FIG0/9 and FIG 0/10 (Reference time) signalling 26g37.2 DRM . 26g37.2.1 Data entity type 5 (data application) signalling 26g37.2.2 Data entity type 8 (reference time) signalling . 27g37.2.3 FAC data application signalling 27g3Annex A (normative): Profiling tables . 28g3A.1 Elemen

18、ts and attributes that are transmitted in the “Basic“ profile 28g3A.1.0 General . 28g3A.1.1 Service Information (SI) . 28g3A.1.2 Programme Information (PI) 29g3A.1.3 Group Information (GI) 30g3A.2 Elements and attributes that are transmitted in the “Advanced“ profile . 30g3Annex B (informative): Pro

19、filing examples 31g3B.1 Profiling/fragmenting example 1 31g3B.2 Profiling/fragmenting example 2 32g3Annex C (informative): Binary encoding example 34g3ETSI ETSI TS 102 371 V3.2.1 (2016-05)5 Annex D (normative): Element tags . 35g3Annex E (normative): Attribute tags 37g3Annex F (normative): Enumerate

20、d types 39g3History 40g3ETSI ETSI TS 102 371 V3.2.1 (2016-05)6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-membe

21、rs, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant

22、to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document

23、. Foreword This Technical Specification (TS) has been produced by Joint Technical Committee (JTC) Broadcast of the European Broadcasting Union (EBU), Comit Europen de Normalisation ELECtrotechnique (CENELEC) and the European Telecommunications Standards Institute (ETSI). NOTE 1: The EBU/ETSI JTC Bro

24、adcast was established in 1990 to co-ordinate the drafting of standards in the specific field of broadcasting and related fields. Since 1995 the JTC Broadcast became a tripartite body by including in the Memorandum of Understanding also CENELEC, which is responsible for the standardization of radio

25、and television receivers. The EBU is a professional association of broadcasting organizations whose work includes the co-ordination of its members activities in the technical, legal, programme-making and programme-exchange domains. The EBU has active members in about 60 countries in the European bro

26、adcasting area; its headquarters is in Geneva. European Broadcasting Union CH-1218 GRAND SACONNEX (Geneva) Switzerland Tel: +41 22 717 21 11 Fax: +41 22 717 24 81 The Eureka Project 147 was established in 1987, with funding from the European Commission, to develop a system for the broadcasting of au

27、dio and data to fixed, portable or mobile receivers. Their work resulted in the publication of European Standard, ETSI EN 300 401 3, for DAB (see note 2) which now has worldwide acceptance. NOTE 2: DAB is a registered trademark owned by one of the Eureka Project 147 partners. The DAB family of stand

28、ards is supported by World DAB, an organization with members drawn from broadcasting organizations and telecommunication providers together with companies from the professional and consumer electronics industry. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should

29、not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Th

30、e present document defines how the SPI data will be transported, compressed and profiled such that a good user experience can be achieved using limited broadcast capacity. Using a combination of SPI profiles it is possible that a range of features could be supported in devices, including: Navigation

31、 and selection of services and programmes. The display of schedules at varying levels of detail for programmes from a range of services. ETSI ETSI TS 102 371 V3.2.1 (2016-05)7 The display of schedules, with programmes and events ordered into particular groups. Searching through current, future and p

32、ast programme listings, including on-demand content (Filecast). Timed recording of individual programmes, or of groups of programmes and themed or similar programming. The present document is compatible with the hybrid digital radio SPI, ETSI TS 102 818 (V3.1.1 or later) 1. ETSI ETSI TS 102 371 V3.2

33、.1 (2016-05)8 1 Scope The present document defines how the XML schema data model for Service and Programme Information (SPI) (ETSI TS 102 818 1) should be compressed, profiled and broadcast. Within the present document the term “DAB“ is used to refer to the Digital Audio Broadcasting standard (ETSI

34、EN 300 401 3) and “DRM“ is used to refer to the Digital Radio Mondiale standard (ETSI ES 201 980 6). In respect to previous versions of the present document, hybrid radio provisions have been added to allow a seamless experience for users when consuming radio services delivered by digital radio broa

35、dcasting systems (DAB, DRM) or IP or a combination of both. The use of the present document allows content to be created once by the service provider for delivery by both mechanisms and allows manufacturers to implement devices with many common elements. 2 References 2.1 Normative references Referen

36、ces are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced docu

37、ments which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents

38、are necessary for the application of the present document. 1 ETSI TS 102 818 (V3.1.1 or later): “Hybrid Digital Radio (DAB, DRM, RadioDNS); XML Specification for Service and Programme Information (SPI)“. 2 ETSI EN 301 234: “Digital Audio Broadcasting (DAB); Multimedia Object Transfer (MOT) Protocol“

39、. 3 ETSI EN 300 401: “Radio broadcasting systems; Digital Audio Broadcasting (DAB) to mobile, portable and fixed receivers“. 4 ISO/IEC 10646: “Information technology - Universal Coded Character Set (UCS)“. 5 ETSI TS 101 756: “Digital Audio Broadcasting (DAB); Registered Tables“. 6 ETSI ES 201 980: “

40、Digital Radio Mondiale (DRM); System specification“. 7 ETSI TS 101 968: “Digital Radio Mondiale (DRM); Data applications directory“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific ref

41、erences, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The follow

42、ing referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TS 102 371 (V1.3.1): “Digital Audio Broadcasting (DAB); Digital Radio Mondiale (DRM); Transportation and Binary Encoding Specification fo

43、r Electronic Programme Guide (EPG)“. i.2 ETSI TS 102 818 (V1.5.1): “Digital Audio Broadcasting (DAB); Digital Radio Mondiale (DRM); XML Specification for Electronic Programme Guide (EPG)“. ETSI ETSI TS 102 371 V3.2.1 (2016-05)9 i.3 ETSI TS 103 177: “Digital Audio Broadcasting (DAB); Filecasting; Use

44、r application specification“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: delivery system: broadcast system, either DAB or DRM, used to deliver the SPI service Ensemble Identifier (EId): unique 16-bit code, allo

45、cated to a DAB ensemble and intended to allow unambiguous worldwide identification of that ensemble entity reference: group of characters used in text strings as a substitute for a single specific character, e.g. this provides for easy specification of loops and conditional data structures. Within t

46、hese specifications, the type of individual data fields is expressed using the mnemonics given in table 1. Table 1: Data type mnemonics for syntax specification Mnemonic Description Uimsbf Unsigned integer, most significant bit first 4.2 Binary objects The basic binary objects defined by the present

47、 document are defined in table 2. Each binary object carries a single top level element and shall be carried within a single MOT object. Table 2: Structure of a binary object Syntax Size Type binary_object() top_level_element() top_level_element: A top level element as defined in clause 4.3.1. ETSI

48、ETSI TS 102 371 V3.2.1 (2016-05)11 4.3 Elements 4.3.0 General All elements use basically the same encoding, as defined here. Table 3: Structure of an element Syntax Size Type element() element_tag 8 bits uimsbf element_length 8 bits uimsbf if (element_length = 0xFE) extended_element_length 16 bits u

49、imsbf if (element_length = 0xFF) extended_element_length 24 bits uimsbf for (i=0; i., where is the 8-bit Extended Country Code (ECC) and is the 16-bit Ensemble Identifier (EId) of the ensemble. When the delivery system is DRM, ScopeID is coded as a 24-bit number in the form: , where is the 24-bit Service Identifier (SId) of one of the services in the DRM channel. If the object contains Programme Information, then this parameter indicates the bearerURI of the service for which the object contains data, as specified